Product#: 3965713

Hood Prop Rod For Fiberglass Hood

Hood prop required when installing a fiberglass hood on you Camaro. Since hood springs are not recommended when using fiberglass hoods, this prop is essential for keeping your hood open while working in the engine...

Product#: K1006

Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; For Hood Hinges; 10-Pieces

Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...

Product#: K1005

Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; For Hood Hinges; 8 Piece Set

OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"- 16 x 1" specs....

Product#: BM1003B

1965-66 Impala / Full Size 2 Door Hardtop / Sedan Body Mount Bushing Set

Classic Industries® offers the finest in pure restoration with this OEM reproduction subframe bushing set. Replacing the original bushings with rubber reproductions is a sure fire way of retaining originality and...

Product#: TF400275A

1957 Bel Air, 150, 210 Nomad; Under Hood Cross Brace

Reproduction of the original under hood cross brace designed for use with 1957 Bel Air, One Fifty Series, Two-Ten Series, Nomad, and Del Ray models. Each brace is manufactured in stamped steel to original factory...

Product#: 153700

1962-66 Chevy, GMC Truck; Hood Rear Bump Stop Brackets; Pair

Reproduction rear bump stop brackets for 1962-66 Chevrolet and GMC truck models. These reproduction brackets mount to the cowl side of the hood, and act as a mounting point for the bump stops. Refer to part number # 3757463...

Product#: K555

1958-77 GM; Hood Adjuster Bolt and Nut Set ; 5/16"-18 x 1-3/8"; Various Models

Reproduction of the original hood stop bolt and nut set designed for use on various 1958-77 GM models. This bolt and nut set will keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct...

Product#: WS1055S

1968-72 Buick Skylark, GS, Riviera; Hood Bumper; Rear Bumper Anchor Bracket Bumper

Reproduction of the hood to cowl rubber bumper for various 1968-72 Buick models including, LeSabre, Riviera, and Centurion.. Reduce the cahance of shipping the paint by making sure the hood is aligned properly. Also fits...

Product#: A14163

Hood Insulation Retainer

"Reproduction of the original style hood insulation fasteners designed to install hood insulation for 1975-up Ford models. For use on part RD30008 or RD3001 hood insulation. "

Product#: MD2105

1972-76 Chrysler/Plymouth/Dodge; Hood Insulation Clip

Factory style replacement hood insulation clip for various 1972-76 Mopar A, B and E-Body models. This black nylon clip measures 1-1/2" L x 1/2" W with a 5/8" prong. Sold individually.

Product#: CHT1300B

Lokar Hood/Trunk Release Cable Set Black

Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire. Hood...

Product#: TF400906

1956 Chevrolet Polished Finish Billet Center Under Hood Brace

CNC machined center hood brace for 1956 Chevrolet models is a must for today's restomod builds. This billet brace will give your engine compartment a stunning look and set you apart from the crowd. Stainless hardware...

Product#: TF400903

1956 Chevrolet Machined Finish Billet Center Under Hood Brace

CNC machined center hood brace for 1956 Chevrolet models is a must for today's restomod builds. This billet brace will give your engine compartment a stunning look and set you apart from the crowd. Stainless hardware...

Product#: TF400904

1957 Chevrolet Machined Finish Billet Center Under Hood Brace

CNC machined center hood brace for 1957 Chevrolet models is a must for today's restomod builds. This billet brace will give your engine compartment a stunning look and set you apart from the crowd. Stainless hardware...

Product#: MD2104

1964-72 Dodge/Plymouth A, B, E-Body, Hood Insulation Clip

Factory style replacement black plastic hood insulation clip. Measurement: Shaft Size - 11/16" long x 1/4" wide. Sold individually. Applications: 1964-72 Mopar A-Body models 1964-72 Mopar B-Body models 1970-72 Mopar...

Product#: TF400911

1955 Chevrolet Polished Finish Billet Diagonal Under Hood Side Braces

CNC machined billet under hood diagonal side braces for 1955 Chevrolet models is a must for today's restomod builds. These braces will give your engine compartment a stunning look and set you apart from the crowd. Sold as a...

Product#: 34136G

1991-96 Police, Taxi, Race Car Black Polyurethane Body Mount / Radiator Support Bushing Set

These unique bushings are designed to never wear out as conventional bushings do. They are self lubricating, never squeak, are weather resistant and are produced using the latest polyurethane materials. Set includes...

Product#: TF400909

1956 Chevrolet Machined Finished Billet Diagonal Under Hood Side Braces

CNC machined billet under hood diagonal side braces for 1956 Chevrolet models is a must for today's restomod builds. These braces will give your engine compartment a stunning look and set you apart from the crowd. Sold as a...

Product#: TF400908

1955 Chevrolet Machined Finished Billet Diagonal Under Hood Side Braces

CNC machined billet under hood diagonal side braces for 1955 Chevrolet models is a must for today's restomod builds. These braces will give your engine compartment a stunning look and set you apart from the crowd. Sold as a...

Product#: TF400910

1957 Chevrolet Machined Finished Billet Diagonal Under Hood Side Braces

CNC machined billet under hood diagonal side braces for 1957 Chevrolet models is a must for today's restomod builds. These braces will give your engine compartment a stunning look and set you apart from the crowd. Sold as a...