Product#: RL7

3-1/4" Wide X 6-3/4" Long Leaf Spring U-Bolts

Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavey duty washers. {specs} Applications: 1973-74...

Product#: 499473

1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body

Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...

Product#: *RL15

1962-67 Chevy II, Nova; Mono Rear Leaf Springs; Pair; Made in the USA

These reproduction rear leaf springs are designed for an exact, direct replacement of the originals. Reproduction of the original mono rear leaf springs designed for use with 1962-67 Chevy II and Nova models. Each leaf spring...

Product#: *RL10

1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!

Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...

Product#: *RL11

1967-69 Camaro, Firebird; Mono Rear Leaf Springs; Convertible; Pair; Made in the USA!

Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models models. Each leaf spring is manufactured to factory specifications and replicates the original in quality, design, and...

Product#: *RL5

5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style

Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...

Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...

Product#: K550

1970-81 Camaro, Firebird, 1962-79 Chevy II, Nova and X-Body; Rear Spring Shackle Bushing Set

Reproduction rear leaf spring shackle for 1962-79 Chevy II/Nova, GM X-Body, and 1970-81 Camaro, Firebird models. Each shackle eplaces the old or worn out original hardware and bushings with a quality reproduction. Includes...

Product#: *R326

1968-69 Camaro / Firebird Mono To Multi Leaf Conversion Hardware Kit with 3-1/2"" U Bolts

Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...

Product#: *R325

1968-69 Camaro / Firebird Mono To Multi Leaf Conversion Hardware Kit with 3" U Bolts & T Bolts

Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...

Product#: TF500055

1956-57 Chevy Bel Air, 150, 210; Leaf Spring Shackle Set; LH Driver Side

Reproduction rear leaf spring shackle for 1956-57 Chevrolet Bel Air, 150, 210 models. This shackle set is manufactured to correct factory specifications offering an authentic replacement to the old or worn out original...

Product#: 5705AR

1964-66 Mustang Leaf Spring U-Bolt

Reproduction rear leaf spring U-bolts for 1964-66 Mustang models. Two required per spring. Reproductions come with deep nuts and washers. {Fitment} {specs}

Product#: 3707891

1953-62 Chevy Corvette; Leaf Spring Shackle; With Bushings; LH or RH; Per Side

Reproduction rear leaf spring shackle with bushings for 1953-62 Chevrolet Corvette models. Each shackle includes 8 total pieces to fit either the LH or RH side. Comes with the bushings and installation hardware. Two are...

Product#: 5705BR

1967-73 Mustang Leaf Spring U Bolt

Reproduction of the original U-bolt designed for use on 1967-73 Muatangs. Each U-bolt is designed to replace the worn out or broken original. Includes U-Bolt and attaching deep nuts and washers. 2 U bolts required per leaf...

Product#: 14029194

1981-91 Chevrolet, GMC 4WD Pickup, Blazer, Jimmy, Suburban; Front Leaf Spring Support Bracket; Each

Replace your damaged or rusted original front leaf spring support bracket for a wide variety of Chevrolet and GMC 4wd truck models from 1981-1991. Each bracket will fit and install as original, and holes are pre-drilled into...

Product#: ME5057

1970-74 Challenger, Barracuda, Cuda; Front Leaf Spring Hanger Gusset; RH Passenger Side

Reproduction of the original type leaf spring hanger gusset designed for use with 1970-74 Dodge and Plymouth E- Body models. This metal reinforcement is welded in place between the rear frame rail and the rocker panel just in...

Product#: MM8308

1970-74 Challenger, Barracuda, Cuda; Leaf Spring Front Mount Perch Bracket Reinforcement; RH Pasenger Side

Reproduction of the original leaf spring front mount perch bracket reinforcement for use with 1970-74 E body models. Each bracket is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: 5630J

1960-64 Ford Galaxie, Ranch Wagon, Country Squire; Rear Leaf Spring Shackle Set; RH or LH; Each

Reproduction rear leaf spring shackle designed for the rearward eyelet of the leaf spring on various 1960-64 Ford / Mercury full size models including Galaxie, Custom, and Ranch Wagon. Each shackle kit is manufactured to...

Product#: *R654

1970-81 Camaro / Firebird Rear Leaf Spring Pad Set

Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs.

Product#: MM8314

1970-74 Mopar B-Body; Leaf Spring Front Mount Outer Reinforcement; LH

Reproduction of the original leaf spring front mount outer reinforcement for use with 1970-74 B-body models. Each bracket is manufactured in stamped steel to original factory specifications featuring correct contours for an...