Product#: F12377

1969-72 Firebird, Trans Am; Crossover Chimney; Ram Air IV, 455 HO

Reproduction of the original heat chimney for 1969-72 Firebird and Trans Am models with Ram Air IV or HO engine. Mounts on the intake crossover and has the provision to connect to the Ram Air pan. {fitment}

Product#: 22513300

2014-15 Chevrolet Camaro; Z28 7.0L; Kooks Green Catted Stainless Steel Exhaust Mid-Pipes; 3" Diameter X 2-3/4"

Performance mid-pipes pipes must be used to connect Kooks headers with an aftermarket or stock catback. Green catted mid-pipes feature the only super high flow cats that are EPA certified to reduce emissions and not create a...

Product#: MB2629

1966-70 B-Body Hemi H-Pipes Cold Rolled Original Style

Replacement H-pipes for 1966-70 Hemi models. Engineered to fit and perform, with nipple tubes welded in place but not drilled out. Pipe is 2-1/2" OD and is hydrasize d down to 2-1/4" OD on the outlet / resonator muffler end....

Product#: GF14784B

2016-23 Chevrolet Camaro; SS/ZL1 6.2L V8; Corsa Xtreme Series Axle-Back Exhaust; Black Tips

Get the performance and aggressive sound you desire without the annoying drone. The nonrestrictive, straight-through design maximizes airflow and improves performance and fuel economy. The Xtreme Series has the most...

Product#: GF14951B

2010-15 Chevrolet Camaro; SS 6.2L V8; Manual Transmission; Corsa Sport Series Cat-Back Exhaust System; Black Tips

Get the performance and aggressive sound you desire without the annoying drone. The nonrestrictive, straight-through design maximizes airflow and improves performance and fuel economy. The Sport series has a distinct rumble...

Product#: GF14953S

2010-15 Chevrolet Camaro; 3.6L V6; Without Factory Ground Effects; Corsa Sport Series Cat-Back Exhaust; Polished Tips

Get the performance and aggressive sound you desire without the annoying drone. The nonrestrictive, straight-through design maximizes airflow and improves performance and fuel economy. The Sport series has a distinct rumble...

Product#: GF14952S

2010-15 Chevrolet Camaro; Coupe; SS 6.2L V8; Automatic Transmission; Corsa Sport Series Cat-Back Exhaust; Polished Tips

Get the performance and aggressive sound you desire without the annoying drone. The nonrestrictive, straight-through design maximizes airflow and improves performance and fuel economy. The Sport series has a distinct rumble...

Product#: 140533

2016 Camaro SS V8 with Factory Ground Effects Borla ATAK Cat-Back Exhaust System

BORLA® exhaust is made from aircraft-quality T-304 austenitic stainless steel (stainless insi de and out) that is superior to 409 or aluminized steel, employing mandrel-bent tubing, all-welded construction, and is...

Product#: 60610

2016-23 Chevrolet Camaro; SS; 6.2L V8; Except Convertible; Borla Exhaust X-Pipe; With AFM Valves; Smog Legal

BORLA® exhaust is made from aircraft-quality T-304 austenitic stainless steel (stainless insi de and out) that is superior to 409 or aluminized steel, employing mandrel-bent tubing, all-welded construction, and is...

Product#: MB2628

1966-70 B-Body Hemi H-Pipes

Replacement H-pipes for 1966-70 Hemi models. Engineered to fit and perform, with nipple tubes welded in place but not drilled out. Pipe is 2-1/2" OD and is hydrasize d down to 2-1/4" OD on the outlet / resonator muffler end....

Product#: 10703

Magnaflow Stainless Steel 2-1/4" Dual Exhaust Smooth Transition Set

Now customizers can compile a system that will work and provide a clean, fully custom look. Made from high quality stainless steel and can be adapted to fit nearly any application. Set includes: 6 - Hangers 2 - Flanges 2 -...

Product#: MB2627

1968-69 440 2-1/2" To 2-1/4" H-Pipes

Replacement H-pipes for 1968-69 440 models. Engineered to fit and perform, with nipple tubes welded in place but not drilled out. Constructed from heavy 14 gauge alum inized tubing for long life and proper sound control.

Product#: MB2630

1970 440 2-1/2" To 2-1/4" H-Pipes

Replacement H-pipes for 1970 440 models. Engineered to fit and perform, with nipple tubes welded in place but not drilled out. Constructed from heavy 14 gauge alumini zed tubing for long life and proper sound control.

Product#: 10702

Magnaflow Stainless Steel 2-1/2" Dual Exhaust Smooth Transition Set

Now customizers can compile a system that will work and provide a clean, fully custom look. Made from high quality stainless steel and can be adapted to fit nearly any application. Set includes: 6 - Hangers 2 - Flanges 2 -...

Product#: A7400115

1999-04 Ford Mustang; 4.6L V8; Pypes 2.5" H-Pipe; With Catalytic Converters

Pypes X & H style mid-pipes are proven winners when it comes to making more horsepower in your 1999-04 Mustang. Typically, X pipes will increase the power at higher rpm's while delivering more of a high-pitched exhaust note,...

Product#: 10701

Magnaflow Stainless Steel 2-1/4" Dual Exhaust Smooth Transition Set

Now customizers can compile a system that will work and provide a clean, fully custom look. Made from high quality stainless steel and can be adapted to fit nearly any application. Set includes: 6 - Hangers 2 - Flanges 2 -...

Product#: 22503101

2010-15 Chevrolet Camaro; SS/ZL1 6.2L; Kooks Off-Road Stainless Steel Exhaust Mid-pipes; 3" Diameter X 2-1/2"

Performance mid-pipes pipes must be used to connect Kooks headers with an aftermarket or stock catback. Off Road mid-pipes feature a non-catted section for unrestricted air flow. Made with T-304 stainless steel and ready to...

Product#: MA3496

1964-66 Barracuda/Valiant 2-1/2" Y-Pipes Set Hi-Po

OEM style pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters.Y-pipes are manufactured to bolt to the original exhaust manifold, and weld to the intermediate pipe. Our...

Product#: MA2436

67 Dart/Barracuda 2-1/2" Y-Pipes Set

OEM style aluminized pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters.Y-pipes are manufactured to bolt to the original exhaust manifold, and weld to the intermediate...

Product#: 60512

2016 Chevrolet Camaro; SS; 6.2L V8; Borla Exhaust X-Pipe Mid-Pipes; Smog Legal

BORLA® exhaust is made from aircraft-quality T-304 austenitic stainless steel (stainless ins ide and out) that is superior to 409 or aluminized steel, employing mandrel-bent tubing, all-welded construction, and is...

Product#: BBK1662

1986-93 Ford Mustang; 5.0L; BBK High Flow X-Pipe With Converters; 2-1/2"

Get your 1986-1993 Mustang 5.0 heard with this BBK Performance 2.5" high flow catted x-pipe. This BBK Performance catted x-pipe will dramatically increase the sound of your Mustang to a roar that will be sure to turn heads....

Product#: BBK1666

1996-98 Ford Mustang; GT 4.6L; BBK High Flow X-Pipe With Converters; 2-1/2"

Get your Mustang GT heard with this BBK Performance 2.5" high flow catted x-pipe. This BBK Performance catted x-pipe will dramatically increase the sound of your Mustang to a roar that will be sure to turn heads. The 2.5"...

Product#: BBK1670

1999-04 Ford Mustang; 4.6L; BBK High Flow X-Pipe With Converters; 2-1/2"

Get your Mustang GT or Cobra heard with this BBK Performance 2.5" high flow catted x-pipe. This BBK Performance catted x-pipe will dramatically increase the sound of your Mustang to a roar that will be sure to turn heads. The...

Product#: 81083

2016-22 Camaro; SS & ZL1; 6.2L; With Manual Transmission; Flowmaster; Scavenger Series 3" Exhaust X-Pipe

Flowmaster X-pipes are designed to eliminate the resonator and increase the sound level and performance in 2016-17 Camaro models. These Scavenger™ Series X-pipe assemblies are intended to be used as an upgrade to...

Product#: BBK1563

1994-95 Ford Mustang; GT/Cobra 5.0L; BBK H-Pipe With Converters; 2-1/2"

Get your Mustang 5.0 heard with this BBK Performance 2.5" catted h-pipe. The 2.5" off road h-pipe increases exhaust flow aiding in more horsepower, torque and better throttle response. This BBK Performance high flow h-pipe...

Product#: BBK1521

1986-93 Ford Mustang; 5.0L; BBK High Flow H-Pipe With Converters; 2-1/2"

BBK 1986-1993 Mustang GT, LX and Cobra direct replacement H-pipes feature 2.5" diameter CNC mandrel bent aluminized tubing with two high flow catalytic converters to ensure maximum flow horsepower and streetability. OEM...

Product#: BBK1786

1987-04 Ford Mustang; 5.0L Coyote Swap; BBK High Flow X-Pipe With Converters

There's a little more to a Coyote 5.0 swap than just the exhuast but BBK Coyote swap headers and midpipe help take some of the guess-work out of it. The 1987-04 Mustang Coyote 5.0L Swap BBK Performance Short X-Pipe is...

Product#: BBK1672

1994-95 Ford Mustang; GT/Cobra 5.0L; BBK High Flow Short X-Pipe With Converters; 2-1/2"

BBK 1994-95 Mustang V8 short mid x-pipes are specifically designed to be used with BBK full length headers to complete the installation to the cat back exhaust system. These short mid-pipes feature 2.5" diameter CNC mandrel...

Product#: BBK1509

1979-93 Ford Mustang; 5.0L; BBK Short H-Pipe With Converters; 2-1/2"

This BBK 1979-93 Mustang GT, LX and Cobra short H pipe is specifically designed to be used with BBK full length headers to complete the installation to the cat back exhaust system. These short H-pipes feature 2.5" diameter...

Product#: BBK1538

1996-04 Ford Mustang; GT/Cobra 4.6L; BBK Mid H-Pipe With Converters; 2-1/2"

This BBK 1996-04 Mustang GT or Cobra short catted H pipe is specifically designed to be used with BBK full length headers to complete the installation to the cat back exhaust system. These short H-pipes feature 2.5" diameter...

Product#: MA3498

1964-66 Barracuda/Valiant 2-1/2" Y-Pipes

OEM style pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters.Y-pipes are manufactured to bolt to the original exhaust manifold, and weld to the intermediate pipe. This...

Product#: F15937

Flowmaster; Universal; 3" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: 25053

Doug"s 2-1/2" Stainless Steel Electric Exhaust Cutouts (Pair)

Doug's cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cut-out is opened and closed. When fully opened, it does not create exhaust flow obstruction that can create a leaky...

Product#: 89L498

2015-17 Mustang; GT; Coupe/Convertible; 5.0L; Flowmaster; Scavenger Series 2.50" X-Pipe Kit

Flowmaster's new Resonator-Delete kit for the 2015-2017 Ford Mustang GT with the 5.0L V8 engine is a great way to increase the sound level of your car. These X-pipe assemblies can be used with the factory rear muffler...

Product#: MB2605

71-74 Mopar B-Body 440 2-1/2" To 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Pipe is 2-1/2'...

Product#: P1094

Pypes Performance X-Change 3" Crossover X-Pipe; Polished 304 Stainless Steel

X-Change X-Pipes allow you to open and close your exhaust with the bolting or unbolting of dump plates. By exiting before the mufflers, you will make even more power! Because V8's fire unevenly, exhaust exits in pulses rather...

Product#: F15935

Flowmaster; Universal; 2-1/4" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: ME1744

70-74 "Cuda 440 6 Bbl 2-1/2" To 2--1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: ME1747

70-74 Challenger 440 6 Pak 2-1/2" To 2-1/4" Headpipe RH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MB2597

1968-70 Mopar B-Body 383 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: ME1732

70 Dodge Challenger/Plymouth Barracuda; Ta/AAR; Headpipe; 2-1/4"; LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MB2596

1968-69 Mopar B-Body 383 2-1/4" Headpipe RH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MA2422

1968-74 Mopar A-Body W/340/360 Headpipe LH 2-1/4" AT Rear, 111" wheelbase

OEM style aluminized headpipes which are superior to the coated style originals. Long lasting and effective against salt-road winters. Each headpipe features factory correct bends and will bolt up to the factory exhaust...

Product#: MB2598

1970 Mopar B-Body 383 2-1/4" Headpipe RH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MB2594

1966-67 Mopar B-Body 361/383 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MB2602

1971-74 Mopar B-Body 340/360 2-1/4" Headpipe RH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: P1003

2-1/2" Pypes Universal X-Pipes W/Dump

Product#: ME1742

70-74 Challenger 383/440 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: ME1743

70-74 Challenger 383/440 2-1/4" Headpipe RH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: ME1740

70-74 "Cuda 383/440 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: ME1738

70-74 Mopar E-Body 318 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MB2600

66-74 Mopar B-Body 273/318 2-1/4" Headpipe RH

OEM style aluminize head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MB2595

1966-67 Mopar B-Body 361/383 2-1/4" Headpipe RH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: ME1734

70 "Cuda 340 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: ME1736

70 Challenger 340 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MA2429

1967-74 Mopar A-Body 6 Cylinder 2" Headpipe 2 Piece

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. For 108"...

Product#: 25055

Doug"s 3" Stainless Steel Electric Exhaust Cutout (Each)

Doug's cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cut-out is opened and closed. When fully opened, it does not create exhaust flow obstruction that can create a leaky...

Product#: 25052

Doug"s 2-1/2" Stainless Steel Electric Exhaust Cutout

Doug's cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cut-out is opened and closed. When fully opened, it does not create exhaust flow obstruction that can create a leaky...

Product#: MA2427

69 Mopar A-Body 383/440 2-1/2" Headpipe LH 1 Piece

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...

Product#: MA2428

69 Mopar A-Body 383/440 2-1/2" Headpipe RH 1 Piece

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...