Product#: MM1280A

1966-70 Dodge, Plymouth B-Body; Rear Upper Shock Crossmember; EDP Coated

Quality reproduction of the original upper rear shock crossmember for use with 1970-74 Dodge and Plymouth B-Body models. Each crossmember is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 200322

1973-77 Chevelle, El Camino, Monte Carlo, Cutlass, Sprint, 1973 GTO, LeMans; Fuel Tank Mounting Brace/Trunk Floor Brace; All Models Except Station Wagon; LH or RH

Reproduction fuel tank mounting brace (also referred to as trunk floor brace) for 1973-77 Chevelle, El Camino, Monte Carlo, Cutlass, and Sprint models, as well as 1973 Pontiac GTO and LeMans. Manufactured in stamped steel to...

Product#: 153572

1964 Impala, Bel Air, Biscayne; Trunk Floor Brace Rear Cross Rail

Reproduction of the original trunk floor cross rail for use on 1964 Chevrolet Full Size models except station wagons. This cross rail is for use 1964 models and features correct mounting points specific to the 1964 model...

Product#: B9001W

1965-70 Impala / Full Size Fuel Tank Mounting Brace (Weld Through)

Correct Weld-Thru™ coated* reproduction of the original gas tank mounting brace. This brace attaches to the bottom of the trunk floor and supports the gas tank. The gas tank mounting straps attach to these braces. 2...

Product#: 153348

1971-72 Nova, Ventura; Trunk Floor Brace; Drivers Side; EDP Coated

Correct reproduction of the original trunk floor brace for use on 1971-72 Chevrolet Nova and Pontiac Ventura models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: 153360

1971-72 Nova, Ventura; Trunk Floor Brace; Passenger Side; EDP Coated

Correct reproduction of the original trunk floor brace for use on 1971-72 Chevrolet Nova and Pontiac Ventura models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: B1721A

1965-70 Impala, Bel Air, Biscayne, Caprice; Trunk Side Brace; Passenger Side

Reproduction of the original trunk side brace for 1965-70 Chevrolet Impala and full size passenger car models. This brace fits on the underside of the trunk floor between the wheel wells and the fuel tank braces. Each brace...

Product#: M135B

1964-70 Mustang Coupe/Fastback; Rear Trunk Brace Support

Reproduction of the original rear trunk brace support designed for use with 1964-70 Mustang coupe and Fastback models. Each trunk brace support is manufactured in stamped steel to original factory specifications featuring...

Product#: TF401204

1955-57 Chevy Bel Air, 150, 210; Center Trunk Brace; Hardtop, Convertible; Weld-Thru

Reproduction center trunk brace for 1955-57 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series hardtop and convertible models. Manufactured to factory specifications featuring original style stiffening ribs, this brace...

Product#: B1720W

1965-70 Impala, Bal Air, Biscayne, Caprice; Trunk Side Brace; Silver Weld Thru Coating; Drivers Side

Reproduction of the original trunk side brace for 1965-70 Chevrolet Impala and full size passenger car models. This brace fits on the underside of the trunk floor between the wheel wells and the fuel tank braces. Each brace...

Product#: 200321

1964-67 GTO, Tempest, LeMans, Skylark, Cutlass; Fuel Tank Mounting Brace/Trunk Floor Brace; All Models Except Station Wagon; LH or RH

Reproduction fuel tank mounting brace (also referred to as the trunk floor brace) for 1964-67 GTO, Tempest, LeMans, Skylark, and Cutlass models. Manufactured in stamped steel to factory specifications, this brace installs to...

Product#: 200323

1968-72 Chevelle, GTO, Tempest, LeMans, Skylark, 442, Cutlass; 1970-72 Monte Carlo; Fuel Tank Mounting Brace/Trunk Floor Brace; All Models Except Station Wagon; LH or RH

Reproduction fuel tank mounting brace (also referred to as trunk floor brace) for 1968-72 Chevelle, GTO, Tempest, LeMans, Skylark, 442, and Cutlass models, as well as 1970-72 Monte Carlo. Manufactured in stamped steel to...

Product#: B1746A

1965-70 Impala, Bel Air, Biscayne, Caprice; Upper Trunk Floor Brace; EDP Coated; LH Driver Side

Reproduction trunk side brace for 1965-70 Chevrolet Impala and full size passenger car models. This brace mounts under the upper trunk floor at the outer edge, next to the wheelhouse. Each brace is manufactured in stamped...

Product#: GN110690

1973-77 Chevrolet Chevelle, Malibu, Oldsmobile Cutlass, Buick Regal; Spare Tire Hold-Down w/ Jack Stop; Set; 3-Piece Set

Reproduction spare tire and jack bracket set for use on 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each bracket is manufactured in quality stamped steel to the...

Product#: MM8296

1970-74 Challenger, Barracuda, Cuda; Rear Floor Pan Brace; LH Drivers Side; EDP Coated

Reproduction of the original style rear floor pan brace for use with 1970-74 Dodge and Plymouth E Body models. Each brace is manufactured in quality stamped steel and features all the correct contours matching the original...

Product#: MM8297

1970-74 Challenger, Barracuda, Cuda; Rear Floor Pan Brace; RH Passenger Side; EDP Coated

Reproduction of the original style rear floor pan brace for use with 1970-74 Dodge and Plymouth E Body models. Each brace is manufactured in quality stamped steel and features all the correct contours matching the original...

Product#: GN110282

1974-92 GM; Floor & Trunk Pan Floor Plug; 5" x 4"; Stamped Steel; Various Models

Reproduction original style floor/trunk pan plug designed for various 1974-92 GM models. Each floor plug is manufactured in stamped steel to factory specifications featuring correct contours for an authentic appearance and...

Product#: MM1281A

1970-74 Challenger, Barracuda, Cuda; Rear Upper Shock Crossmember; EDP Coated

Quality reproduction of the original upper rear shock crossmember for use with 1970-74 Dodge and Plymouth E-Body models. Each crossmember is manufactured in stamped steel to original factory specifications featuring correct...

Product#: MM1558A

1968-70 Dodge, Plymouth B-Body; Trunk Floor Reinforcement Set ; 3 Piece Set

Reproduction of the original style trunk reinforcements for use with 1968-70 Dodge and plymouth models. Each trunk floor reinforcement is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 153571

1962 Impala, Bel Air, Biscayne; Trunk Floor Brace, Rear Cross Rail; EDP Coated

Reproduction of the original trunk floor cross rail for use on 1962 Chevrolet Full Size models except station wagons. This cross rail is for use 1962 models and features correct mounting points specific to the 1962 model...

Product#: B9001A

1965-70 Impala, Bel Air, Biscayne, Caprice; Fuel Tank Mounting Brace; EDP Coated

Correct EDP coated* reproduction of the original fuel tank mounting brace designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne and Caprice models. This replacement brace attaches to the bottom of the trunk floor...

Product#: 16114

1968-70 Chevy II Nova; Trunk Floor Brace; LH or RH; Each

Reproduction of the original trunk floor brace designed for use with 1968-70 Chevy II and Nova models. Manufactued in quality stamped steel replicating the original design and fitment. This replacement brace attach to the...

Product#: RD702

1970-73 Camaro, Firebird; Inner Trunk to Tailpan Brace; Pair

Reproduction trunk floor to rear panel brace for 1970-73 Camaro and Firebird models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and...

Product#: MM1233A

1968-69 Plymouth B-Body; Trunk Lock Support; with Lock Striker

Reproduction of the original trunk lock support for use with 1968-69 Plymouth B-Body models. The trunk lock support is a must for any restoration. This reproduction also includes the lock striker unit attached to the support....

Product#: B1720A

1965-70 Impala, Bel Air, Biscayne, Caprice; Trunk Side Brace; Drivers Side

Reproduction of the original trunk side brace for 1965-70 Chevrolet Impala and full size passenger car models. This brace fits on the underside of the trunk floor between the wheel wells and the fuel tank braces. Each brace...

Product#: B1721W

1965-70 Impala, Bel Air, Biscayne, Caprice; Trunk Side Brace; Weld Thru Coating; Passenger Side

Reproduction of the original trunk side brace for 1965-70 Chevrolet Impala and full size passenger car models. This brace fits on the underside of the trunk floor between the wheel wells and the fuel tank braces. Each brace...

Product#: BP1235A

1964-67 Tempest, Lemans, GTO; Fuel Tank Brace; Each

This trunk floor reinforcement and fuel tank brace was originally welded under the center trunk pan for support and to form an attachment for gas tank straps. This superb quality reproduction is ideal for replacing a damaged...

Product#: B1747A

1965-70 Impala, Bel Air, Biscayne, Caprice; Upper Trunk Floor Brace; EDP Coated; Passenger Side

Reproduction of the original trunk side brace for 1965-70 Chevrolet Impala and full size passenger car models. This brace mounts under the upper trunk floor at the outer edge, next to the wheelhouse. Each brace is...

Product#: M135CR

1964-70 Ford Mustang; Convertible; Trunk Brace End Cap; RH Passenger Side

Passenger side, one piece right hand end bracket produced in stamped steel. Made in the USA, each end cap fits the 1964-70 Mustang convertible reinforcement brace and is designed for weld-on installation. Made in USA

Product#: M135CL

1964-70 Ford Mustang; Convertible; Trunk Brace End Cap; LH Driver Side

Driver side, one piece left hand end bracket produced in stamped steel. Made in the USA, each end cap fits the 1964-70 Mustang convertible reinforcement brace and is designed for weld-on installation. Made in USA

Product#: GN110691

1973-77 Chevrolet Chevelle, Malibu, Oldsmobile Cutlass, Buick Regal; Trunk Floor Jack Stop; RH Side

Reproduction passenger side trunk floor jack stop bracket for 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each bracket is manufactured in quality stamped steel...

Product#: GN110692

1973-77 Chevrolet Chevelle, Malibu, Oldsmobile Cutlass, Buick Regal; Trunk Floor Jack Stop; LH Driver Side

Reproduction driver side trunk floor jack stop bracket for 1973-1977 Chevrolet Chevelle, Monte Carlo, Oldsmobile Cutlass, Pontiac Grand Am, Grand Prix and Buick Regal. Each bracket is manufactured in quality stamped steel to...

Product#: 152629

1999-06 Chevrolet Silverado 1500 Upper Rear Shock Mount Forward Crossmember

Reproduction of the upper rear shock mount forward crossmember for 1999-2006 Chevrolet Silverado 1500 models. This commonly rusted piece is the mounting point for the rear shocks and fuel tank. Manufactured from CNC cut and...

Product#: MM1557

1962-65 Mopar B-Body Trunk Floor Reinforcement

This factory style trunk floor reinforcement is manufactured in OE gauge steel featuring all original contours and details. Comes finished with a black electrophoretically deposited coating (EDP , or E-coat) for superior...

Product#: MM1560B

1970-74 Mopar E-Body Trunk Floor Reinforcements

These Restorer's Choice™ trunk floor reinforcements were originally welded under the center trunk pan to add support. Over time, the original reinforcements either rusted away or were lost. Stamped in OE gauge steel,...

Product#: KW975R

1967-68 Camaro, Firebird; Quarter Panel Trunk Opening Corner Stiffener; Coupe; Passenger Side

Quality reproduction quarter panel trunk opening corner stiffener panel for 1967-68 Camaro and Firebird models. Each panel is manufactured from stamped steel replicating the original configuration for a cosmetically correct...

Product#: KW975L

1967-68 Camaro, Firebird; Quarter Panel Trunk Opening Corner Stiffener; Coupe; Driver Side

Quality reproduction quarter panel trunk opening corner stiffener panel for 1967-68 Camaro and Firebird models. Each panel is manufactured from stamped steel replicating the original configuration for a cosmetically correct...

Product#: MM1558B

1968-70 Mopar B-Body 3 Piece Trunk Floor Reinforcement Set

These Restorer's Choice™ trunk floor reinforcements were originally welded under the center trunk pan to add support. Over time, the original reinforcements either rusted away or were lost. Stamped in OE gauge steel,...

Product#: MM1561B

1970-74 Mopar E-Body Rear Floor Pan Braces

These factory-style replacement rear floor pan braces are stamped in OE gauge steel on an all-new tooling and feature all the correct contours and mounting points. The braces are installed by welding them onto each side of...

Product#: CM4205

1962-67 Chevy II, Nova; Trunk Floor Brace; RH or LH

Reproduction of the original trunk floor brace for use with 1962-67 Chevy II and NOva models. Replace the rusted or damaged trunk floor braces on your 1962-67 Chevy II/Nova. This replacement brace attaches to the underside of...

Product#: 17B862E

1971-73 Ford Mustang; Inner Trunk Bracket; LH Or RH

Will fit on either driver or passenger side. Reinforces the tail light panel where the rear bumper attaches. Spot welds to trunk floor and rear crossmember. Made in USA

Product#: C3480

1967-68 Camaro, Firebird; Trunk Floor Reinforcement; with EDP Coating; Each

Reproduction of the original trunk floor reinforcement braces for use with 1967-68 Camaro and Firebird models. The trunk floor reinforcements were originally welded under the center trunk pan to add support. Each...

Product#: MM1284A

1970-74 Dodge, Plymouth E-Body; Rear Cross Rail; EDP Coated

Reproduction of the original rear cross rail for use with 1970-74 Dodge and Plymouth E-Body models. Each cross rail is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: C2480

1970-73 Camaro, Firebird; Fuel Tank Brace Set; 4 Piece Set; EDP Coated

Reproduction of the original fuel tank brace set designed for use with 1970-73 Camaro and Firebird models. Each fuel tank brace is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: KW611

1967-68 Camaro, Firebird; Trunk Floor to Rear Panel Inner Brace; Each; EDP Coated

Reproduction of the original trunk floor to rear panel brace designed for use with 1967-68 Camaro and Firebird models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: KW612

1969 Camaro, Firebird; Trunk Floor to Rear Panel Inner Brace; EDP Coated

Reproduction of the original trunk floor to rear panel brace designed for use with 1969 Camaro and Firebird models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for...

Product#: K251

1970-73 Camaro / Firebird; Tail Panel Brace ; with EDP Coating

Reproduction of the original tail panel brace designed for use on 1970-73 Camaro and Firebird models. The tail panel brace is a must for any trunk area restoration. Mounts between the trunk floor and tail panel. This quality...

Product#: 17B862B

1964-66 Mustang; Inner Trunk Bumper Mount Bracket ; LH

This bracket is located inside the trunk, and is welded below the tail lamp. The bumper bolts go through this piece to mount the bumper. Reinforces the tail light panel where the rear bumper attaches. Spot welds to trunk...

Product#: 17B862A

1964-66 Mustang; Inner Trunk Bumper Mount Bracket; RH

This bracket is located inside the trunk, and is welded below the tail lamp. The bumper bolts go through this piece to mount the bumper. Reinforces the tail light panel where the rear bumper attaches. Spot welds to trunk...

Product#: MM1283A

1968-70 Dodge, Plymouth B-Body; Rear Cross Rail; EDP Coated

Reproduction of the original rear cross rail for use with 1968-70 Dodge and Plymouth B-Body models. Each cross rail is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: C2480W

1970-73 Camaro, Firebird; Fuel Tank Brace Set; 4 Piece Set; Silver Weld Thru Primer

Reproduction fuel tank brace set for 1970-73 Camaro and Firebird models. Each fuel tank brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....

Product#: 153251

1974-81 Camaro, Firebird; Fuel Tank Brace Set; 4 Piece Set

Reproduction of the original fuel tank braces for use with 1974-81 Camaro and Firebird models. Braces are manufactured from stamped steel to the correct OE configuration replicating the original for authenticity and fitment....

Product#: MM1560A

1970-74 Dodge, Plymouth E-Body; Trunk Floor Reinforcements; Pair

Reproduction of the original style trunk reinforcements for use with 1970-74 Dodge and plymouth models. Each trunk floor reinforcement is manufactured in stamped steel to original factory specifications featuring correct...

Product#: B6164

1963 Impala, Bel Air, Biscayne; Trunk Floor Brace Rear Cross Rail; EDP Coated

Reproduction of the original trunk floor cross rail for use on 1963 Chevrolet Full Size models except station wagons. This cross rail is for use 1963 models and features correct mounting points specific to the 1963 model...

Product#: 15106

1968-69 Chevy II, Nova; Trunk Gutter Side Brace; LH Drivers Side

Reproduction of the original trunk gutter side brace for use with 1968-69 Chevy II and Nova models. Each brace is designed and manufactured to replicate the original configuration and dimensions offering an authentic...

Product#: 15107

1968-69 Chevy II, Nova; Trunk Gutter Side Brace; RH Passenger Side

Reproduction of the original trunk gutter side brace for use with 1968-69 Chevy II and Nova models. Each brace is designed and manufactured to replicate the original configuration and dimensions offering an authentic...

Product#: KW613

1969 Camaro, Firebird; Trunk Floor Rear Panel Corner Braces; Pair; EDP Coated

Replace your rusted or damaged original trunk floor corner braces with these quality reproductions. These braces extend from the rear trunk floor pan to the inside of the rear end or quarter panel at the bumper mounting...

Product#: 15108

1970 Nova; Trunk Gutter Side Brace; LH

Reproduction of the original trunk gutter side brace for use with 1970 Nova models. Each brace is designed and manufactured to replicate the original configuration and dimensions offering an authentic appearance and fitment....

Product#: 17B862DP

1969-70 Mustang, Cougar; Inner Trunk Bumper Bracket Set

Reproduction of the original inner trunk bumper brackets for use with 1969-70 Mustang and Cougar models. Reinforces the tail light panel where the rear bumper attaches. Spot welds to trunk floor and rear crossmember. Sold in...

Product#: 17B862CP

1967-68 Ford Mustang/Mercury Cougar; Inner Trunk Bumper Bracket Set

Reproduction of the original trunk bumper brackets that reinforce the tail light panel where the rear bumper attaches. Spot welds to trunk floor and rear crossmember. Sold in pairs to fit driver & passenger sides. For use on...