Product#: 150106

1951-53 Chevrolet, GMC Truck; Bed Strip Set; Short Bed; Stepside; 7 Piece; Unpolished Stainless

Reproduction of the original bed strips dsigned for use with 1951-53 Chevrolet and GMC pickup truck models. These bed strips hold the wood planking to the bed cross sills. Each strip is manufactured to the original design...

Product#: CX1708

1967-72 Chevrolet, GMC Fleetside Pickup; Rear Roll Pan; with License Plate Pocket & 2 License Lamps

Customize the rear end of your Chevrolet or GMC pickup truck with this quality roll pan with license plate pocket. This roll pan is manufactured in quality stamped steel for a precise custom fit. Features an EDP coating for...

Product#: 100716

1960-62 Chevrolet/GMC Pickup; Stepside; Cross Sill Brace; Rear

The rear cross sill is located below the tailgate, and ties the back of the bed together. Bolted between the bed sides, it provides the rear mounting holes for the bed wood and strips.

Product#: T1455

1954-87 Chevy, GMC Stepside; Rear Roll Pan; with License Plate Pocket; without License Lamps

Customize the rear end of your classic Chevrolet or GMC stepside pickup truck with a sleek looking steel rear roll pan. This all steel roll pan is just what you need to add a cutom appearance. Manufactured in stamped steel...

Product#: 110109

1947-53 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Polished

Reproduction of the original angle strips that attach the side boards on Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features pre-punched...

Product#: 100720

1958-59 Chevrolet/GMC Pickup; Fleetside; Cross Sill Brace; Rear

The rear cross sill is located below the tailgate, and ties the back of the bed together. Bolted between the bed sides, it provides the rear mounting holes for the bed wood and strips. Note: Shipped double oversize.

Product#: 110151

1963-66 Chevrolet, GMC Truck; Angle Strips; Stepside; Long Bed; Polished Stainless; Pair

Reproduction angle strips for 1963-66 Chevrolet and GMC pickup truck models. These angle strips are manufactured to factory specifications and attach to the side boards on Stepside long bed models. The angle strips are bolted...

Product#: 110145

1957-59 Chevrolet/GMC Truck Long Bed / Stepside 97" Polished Stainless Steel Angle Strips

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 110130

1947-53 Chevrolet, GMC Pickup; Angle Strip; Stepside; Long Bed; Stainless Steel; Polished

Reproduction of the original angle strips designed for use with 1947-53 Chevrolet and GMC pickup trucks. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the...

Product#: 110112

1954-59 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Polished

Reproduction of the original angle strips that attach the side boards on 1954-59 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: DT110610

1972-93 Dodge D/W Fleetside Pickup; Rear Roll Pan; With License Plate Provision and License Lamp

This rear roll pan is made of stamped steel and will bolt or weld on depending on your desired look. The curved shape of this rear pan matches the contour of the bed sides below the tailgate. This rear pan will give your...

Product#: 100713

1954-55 Chevrolet, GMC Stepside Pickup Truck; Rear Cross Sill; 1/2 Ton; with 8 Boards

Reproduction of the original rear cross sill for use with 1954-55 Chevrolet and GMC 1/2 ton Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between...

Product#: 110136

1955-57 Chevrolet, GMC; Bed Angle Strips; Long Bed; Stepside; 89"; Polished Stainless Steel

Reproduction of the original angle strips that attach the side boards on 1955-57 Chevrolet and GMC Pickup Stepside long bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 102628

1947-50 Chevrolet, GMC Pickup Truck; Rear Cross Sill; 3/4 Ton; Stepside; with 9 Boards

Reproduction of the original rear cross sill for use with 1947-50 Chevrolet and GMC Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between the bed...

Product#: 110121

1973-87 Chevrolet, GMC; Bed Angle Strips; Short Bed; Stepside; Stainless Steel; Polished

Reproduction of the original angle strips that attach the side boards on 1967-72 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110154

1967-72 Chevrolet, GMC; Bed Angle Strips; Long Bed; Stepside; Polished Stainless Steel

Reproduction of the original angle strips that attach the side boards on 1967-72 Chevrolet and GMC Pickup Stepside long bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110133

1954-55 Chevrolet, GMC Pickup Truck; Angle Strips; Stepside; Long Bed; Polished Stainless; Pair

Reproduction of the original angle strips designed for use with 1954-55 Chevrolet and GMC pickup truck models. These angle strips are manufactured to factory specifications and attach to the side boards on Stepside long bed...

Product#: 110131

1947-53 Chevrolet, GMC; Bed Angle Strips; Stepside; Long Bed; Stainless; Unpolished

Reproduction of the original angle strips that attach the side boards on 1947-53 Chevrolet and GMC Pickup Stepside long bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110118

1967-72 Chevrolet, GMC; Bed Angle Strips; Short Bed; Stepside; Stainless Steel; Polished

Reproduction of the original angle strips that attach the side boards on 1967-72 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110146

1957-59 Chevy, GMC Stepside Pickup Truck; Angle Strips; Long Bed; 97"; Stainless; Unpolished

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 110155

1967-72 Chevrolet/GMC Stepside; Angle Strips; Long Bed; Stainless Steel; Unpolished

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 110113

1954-59 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Unpolished Stainless

Reproduction of the original angle strips that attach the side boards on 1954-59 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 100811

1963-66 Chevrolet/GMC Stepside; Angle Strips; Long Bed; Stainless Steel; Unpolished

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 100158

1973-87 Chevrolet, GMC Stepside Pickup; Long Bed; Angle Strips; Stainless Steel; Unpolished

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 110116

1960-66 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Unpolished

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 110119

1967-72 Chevrolet, GMC Stepside; Bed Angle Strips; Short Bed; Stainless; Unpolished

Reproduction of the original angle strips that attach the side boards on 1967-72 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110122

1973-87 Chevrolet/GMC Truck; Angle Strips; Stepside; Short Bed; Stainless Steel; Unpolished

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: CX1315

1955-72 Chevrolet, GMC Pickup Long Bed; Bed Mounting Pad Set; 1/2 Ton; 10 Piece Set

Keep the truck bed in proper alignment by replacing the old or worn out mounting pads. This mounting pad set is designed for use with 1947-72 Chevrolet and GMC 1/2 ton pickup trucks with long bed. Each set contains the...

Product#: 110114

1954-59 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Raw Steel; Paintable

Reproduction of the original angle strips that attach the side boards on 1954-59 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110429

1963-72 Chevrolet, GMC Pickup Truck; Stepside; Cross Sill Brace; Center

Reproduction cross sill for 1963-72 Chevrolet and GMC Stepside pickup truck models. The bed strips are bolted to the cross sills giving the bed wood strength and rigidity and providing the surface to mount the bed to the...

Product#: 110111

1947-53 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Raw Steel; Paintable

Reproduction of the original angle strips that attach the side boards on 1947-53 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110438

1960-72 Chevrolet, GMC Pickup Truck; Fleetside; Reinforcement Strip; For Bed With Wood Floor; 72"

Reproduction of the original wood bed reinforcement strip for 1960-72 Chevrolet and GMC stepside pickup truck models. Reinforcement strips are shorter in height than cross sills, and bolt to the bed strips and angle strips,...

Product#: 110138

1955-57 Chevrolet, GMC; Bed Angle Strips; Long Bed; Stepside; 89"; Raw Steel; Paintable

Reproduction of the original angle strips that attach the side boards on 1955-57 Chevrolet and GMC Pickup Stepside long bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110135

1954-55 Chevrolet, GMC Truck; Angle Strips; Stepside; Long Bed; Raw Steel; Paintable

Reproduction of the original angle strips for 1954-55 Chevrolet and GMC pickup truck models. These angle strips are manufactured to factory specifications and attach to the side boards on Stepside long bed models. The angle...

Product#: 110159

1973-87 Chevrolet/GMC Stepside; Angle Strips; Long Bed; Raw Steel; Paintable

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 110431

1960-72 Chevrolet, GMC; Stepside / Longhorn Fleetside; Reinforcement Strip; For Bed With Wood Floor; 49.5"

Reproduction stamped steel center reinforcement strip, or center cross sill for 1960-72 Chevrolet and GMC stepside pickup, and 1969-72 Chevrolet and GMC Fleetside Longhorn pickup models. This brace is located below the bed...

Product#: TR10715A

1961-72 Ford F-Series Pickup Truck; Short Bed Flareside; Center Cross Sill

Reproduction center cross sill for 1961-72 Ford F100 Short Bed Flareside pickup truck. This cross sill is specifically designed to fit the dimensions and contours of the 1961-1972 Ford F100 short bed flareside trucks. Stamped...

Product#: T70525

1963-91 Chevrolet, GMC Truck; Under Bed Spare Tire Carrier Nut;

Reproduction of the original spare tire carrier nut designed for use with 1963-91 Chevrolet and GMC truck models. This spare tire nut is manufactured in hard steel replicating the original configuration for an authentic...

Product#: 19708

1967-72 Chevrolet, GMC Fleetside Pickup; Reinforcement Strip 72"; Steel Bed; Front Of Wheel Well

Reproduction bed cross sill reinforcement strip for 1967-72 Chevrolet and GMC Fleetside pickup truck models with steel bed. Each strip is manufactured to original dimensions. Measure 72" long. This part features a rust...

Product#: 19825

1967-72 Chevrolet,GMC Pickup Truck; Reinforcement Strip 50"; Fleetside Pickup; Steel Bed; Between Wheel Wells

Reproduction of the original bed reinforcement strip designed for use with 1967-72 Chevrolet and GMC Fleetside pickup truck models with steel bed. Each strip is manufactured to original dimensions. Measures 50" long. This...

Product#: T70486

1975-91 Chevrolet, GMC Pickup; Spare Tire Carrier Hook

Reproduction of the original spare tire carrier hook designed for use with 1975-91 Chevrolet and GMC pickup truck models. Each hook is manufactured in quality stamped steel replicating the original hook in design, appearance,...

Product#: 153414

1947-53 Chevy, GMC Pickup Truck; Rear Roll Pan; with License Plate Pocket & 2 License Lamps

Customize the rear end of your classic truck with a sleek looking roll pan. The roll pan is perfect for those who want a unique and customized appearance for the rear. This roll pan include a license plate pocket and license...

Product#: T1457

1967-72 Chevrolet, GMC Fleetside Pickup; Roll Pan; with License Provision; w/o License Lights

Customize the rear end of your classic truck with a sleek looking roll pan. Each roll pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....

Product#: C2484

1947-1953 Chevrolet, GMC Truck; Rear Gravel Shield; EDP Coated

Reproduction of the original rear gravel shield designed for use with 1947-53 Chevrolet or GMC truck models. Each shield is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: T1456

1960-66 Chevrolet, GMC Fleetside Pickup; Roll Pan; with License Plate Pocket; without License Lamps

Customize the rear end of your classic truck with a sleek looking roll pan. Each roll pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....

Product#: T1475

1954-87 Chevrolet, GMC Stepside Pickup; Rear Roll Pan; without License Plate Pocket; Smooth Style

Customize the rear end of your classic Chevrolet or GMC stepside pickup truck with a sleek looking steel rear roll pan. This all steel roll pan is just what you need to add a custom appearance. Manufactured in stamped steel...

Product#: 100722

1963-72 Chevrolet, GMC; Rear Cross Sill; Fleetside Pickup; for Wood Floor Only

Reproduction of the original rear cross sill for use with 1963-1973 Chevrolet and GMC Fleetside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between the...

Product#: 110115

1960-66 Chevrolet, GMC; Bed Angle Strips; 1/2, 3/4 Ton; Short Bed; Stepside; Stainless; Polished

Reproduction of the original angle strips that attach the side boards on 1960-66 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features...

Product#: 110157

1973-87 Chevrolet/GMC Truck Long Bed / Stepside Polished Stainless Steel Angle Strips

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: 110148

1960-62 Chevrolet/GMC Truck Long Bed / Stepside Polished Stainless Steel Angle Strips

Angle strips attach the side boards on Stepside beds. These angle pieces are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall...

Product#: T1454

1947-53 Chevy, GMC Stepside; Rear Roll Pan; with License Plate Pocket; without License Lamps

Customize the rear end of your classic truck with a sleek looking roll pan. Each roll pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....

Product#: 154109

1960-66 Chevrolet, GMC Fleetside Pickup; Roll Pan; with License Plate Pocket & 2 License Lamps

Customize the rear end of your classic truck with a sleek looking roll pan. Each roll pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....

Product#: 100715

1955-59 Chevrolet, GMC Stepside Pickup Truck; Rear Cross Sill Brace

Reproduction of the original rear cross sill for use with 1955-59 Chevrolet and GMC 1/2 ton Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between...

Product#: 102627

1947-51 Chevrolet, GMC Pickup Truck; Rear Cross Sill; 1/2 Ton; Stepside; with 9 Boards

Reproduction of the original rear cross sill for use with 1947-51 Chevrolet and GMC Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between the bed...

Product#: T71003

1973-87 Chevrolet, GMC Fleetside Pickup; Rear Roll Pan; w/o License Plate Pocket

Customize the rear end of your Chevrolet or GMC Fleetside pickup truck with this sleek looking roll pan. Give your pickup a smooth and unique appearance by adding this custom roll pan. Designed to fit 1973-87 Chevy and GMC...

Product#: 153415

1954-87 Chevy, GMC Stepside; Rear Roll Pan; with License Plate Pocket & 2 License Lamps

Customize the rear end of your classic stepside truck with a sleek looking roll pan. The roll pan is perfect for those who want a unique and customized appearance for the rear. This roll pan features a built-in license plate...

Product#: 100718

1967-72 Chevrolet, GMC Stepside Pickup; Rear Cross Sill Brace

Reproduction rear cross sill for 1967-72 Chevrolet & GMC Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between the bed sides, it provides the rear...

Product#: 110435

1963-72 Chevrolet / GMC Truck; Fleetside; Cross Sill Brace; For Bed With Wood Floor

This cross sill is mounted across the frame under the wood for support. The bed strips are bolted to the cross sills giving the bed wood strength and rigidity and providing the surface to mount the bed to the truck frame....

Product#: 102617

1951-53 Chevrolet, GMC Pickup Truck; Rear Cross Sill; 1/2 Ton; C10; Stepside; with 8 Boards

Reproduction of the original rear cross sill for use with 1951-53 Chevrolet and GMC Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between the bed...

Product#: 102618

1951-53 Chevrolet, GMC Pickup Truck; Rear Cross Sill; 3/4 Ton; Stepside; with 8 Boards

Reproduction of the original rear cross sill for use with 1951-53 Chevrolet and GMC Stepside Pickup Truck models.The rear cross sill is located below the tailgate and ties the back of the bed together. Bolted between the bed...