Product#: K298

1967-69 Camaro, Firebird; Rear Shock Upper Mounting Plate; Pair

One of the most commonly rusted, damaged or accidentally discarded items in the rear suspension is this rear upper shock mount plate. This plate is mounted between the upper shock bushings and bolts to the factory weld nuts...

Product#: 748600

1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each

Reproduction of the lower rear shock mounting bolt for 1968-69 Camaro, Firebird, and 1968-79 Nova, 1971-77 Ventura, 1973-80 Omega, 1973-75 Apollo, 1975-80 Skylark models with multi-leaf springs. This essential bolt was...

Product#: RL6

Rear Shock Extension Fine Thread

Extends shock 2" allowing shocks to reach the shock mount on body. (For use on mono to multi-leaf conversions). 1 pair required

Product#: 11162A

1965-1970 Mustang, Rear Shock Mount Panel; EDP Coated

Reproduction or the rear shock mount panel section designed for use with 1965-70 Mustang models. Each shock panel is manufactured in quality stamped steel to original factory specifications. This panel was only available with...

Product#: 3790247

1962-67 Chevrolet Chevy II Nova; Strut Rod; with Hardware

Reproduction of the original strut rod designed for use on 1962-67 Chevy II Nova models. Manufactured to correct OE specifications for reliability and authenticity. Rods are 21-3/4" overall length, 5-5/8" thread length,...

Product#: *R132

1967-69 Camaro, Firebird; Plastic Shock Cap; 4 Piece Set

Finally there's a quality reproduction of the often missing or broken shock cap. This cap is installed to cover the nut and threads to protect the threads from damage. Correct reproduction of the original injection molded...

Product#: RL6A

Rear Shock Extension Coarse Thread

Extends shock 2" allowing shocks to reach the shock mount on body. (For use on mono to multi-leaf conversions). 1 pair required

Product#: C132

1967-69 Camaro, Firebird; Shock Absorber Plastic Cap; Pair

Correct reproduction of the original injection molded plastic shock absorber cap designed for use with 1967-69 Camaro and Firebird models. This is the cap that threads onto the top of the shock to protect the threads from...

Product#: STC3

1964-66 Ford Mustang; Shock Tower Top Cap; LH Or RH; Black

1964-66 Mustang stamped steel front shock tower top cap. Simple bolt-on installation. Comes in black. Sold Individually. Two required per vehicle. Note: We highly recommend using a thread-chasing tool to clean paint out of...

Product#: C2515

1947-55 Chevrolet, GMC Pickup Truck; Shock Absorber Bracket; RH or LH; Each

Reproduction of the original front upper shock absorber bracket designed for use with 1947-55 Chevrolet, GMC pickup truck models. Each bracket is manufactured in quality stamped steel to exact factory specifications...

Product#: ME5058

1970-74 Dodge, Plymouth E-Body; Rear Shock Crossmember Bracket

Steel reproduction of the original rear shock crossmember bracket for 1970-74 Dodge and Plymouth E-Body models. Each bracket is manufactured in stamped steel to original factory specifications featuring correct contours for...

Product#: HP590

1936-49 Chevrolet/GMC Truck; Shock Absorber Conversion Kit

For those wishing to add modern tube shock absorbers to their 1949 and older 1/2 ton pickup with original lever action shocks. We now stock a complete kit which includes upper and lower forged steel shock mounts front and...

Product#: 88L326

1979-04 Ford Mustang; Maximum Motorsports Rear Coil-Over Kit For Bilstein Struts

This coil-over kit from Maximum Motorsports will increase handling performance and ride quality in your 1979-04 Mustang. Designed specifically for Bilstein struts, this kit will get the most out of your suspension for either...

Product#: MM52311

1964-76 Mopar A-Body - QA1 Dynamic Strut Bar Set

Improve your Mopar's handling with QA1 Dynamic Strut Bars for 1964-76 A-Body models. These fully adjustable strut bars are a direct bolt-in for both aftermarket and factory K-members. Manufactured from 6061-T6 aluminum and...

Product#: CC116

1982-92 Camaro; Firebird; Aluminum Caster Camber Plates for QA1 Proma Star Struts; LH and RH

QA1's aluminum caster camber plates for 1982-92 Camaro and Firebird models are loaded with features along with great looks. They are significantly lighter than the stock OE parts, have a highly durable anodized finish that...

Product#: CC115

2005-14 Mustang; Aluminum Caster Camber Plates for QA1 Struts; LH and RH

All new QA1 aluminum caster camber plates are a game-changer for your Mustang's suspension system. Not only are they significantly lighter than their steel counterparts, their highly durable anodized finish resists corrosion....

Product#: CC114

1994-04 Mustang; Aluminum Caster Camber Plates for QA1 Struts; LH and RH

All new QA1 aluminum caster camber plates are a game-changer for your Mustang's suspension system. Not only are they significantly lighter than their steel counterparts, their highly durable anodized finish resists corrosion....

Product#: CC112

1990-93 Mustang; Aluminum Caster Camber Plates for QA1 Struts; LH and RH

All new QA1 aluminum caster camber plates are a game-changer for your Mustang's suspension system. Not only are they significantly lighter than their steel counterparts, their highly durable anodized finish resists corrosion....

Product#: 88L384

1999-04 Ford Mustang; w/ IRS; Maximum Motorsports Rear Coil-Over Kit For Koni SA Shocks

Mustang Rear Coil-Over conversion kit for Koni Single Adjustable shocks (IRS Cobra only). Springs not included. {specs} {fitment}

Product#: MM1281B

1970-74 Challenger, Barracuda, Cuda; Rear Crossmember Shock Mount

Factory style replacement rear upper cross member is manufactured in OE-gauge steel, features all the original contours and details and a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term...

Product#: 88L327

1979-04 Ford Mustang; Maximum Motorsports Front Coil-Over Kit For Bilstein Struts

This coil-over kit from Maximum Motorsports will increase handling performance and ride quality in your 1979-04 Mustang. Designed specifically for Bilstein shocks, this kit will get the most out of your suspension for either...

Product#: 88L038

1979-89 Ford Mustang; Steeda; Caster/Camber Plates

Dial in extra caster for straight line tracking and extra camber for tight cornering grip or set the car up for best tire wear with these Steeda caster camber plates. Unlike other plates that are one size fits all years,...

Product#: 88L037

1990-93 Ford Mustang; Steeda; Caster/Camber Plates

Dial in extra caster for straight line tracking and extra camber for tight cornering grip or set the car up for best tire wear with these Steeda caster camber plates. Unlike other plates that are one size fits all years,...

Product#: CCK743R

1979-04 Ford Mustang; BMR Suspension Rear Coilover Conversion Kit; w/ Control Arm Bracket; Red

Increase traction and add ride height adjustability to the rear of your 1979-2004 Mustang with a Coil-Over Conversion Kit from BMR Suspension. OE-style lowering springs can drop the vehicle, but do so at the expense of...

Product#: 88L036

1994-04 Ford Mustang; Steeda; Caster/Camber Plates

Dial in extra caster for straight line tracking and extra camber for tight cornering grip or set the car up for best tire wear with these Steeda caster camber plates. Unlike other plates that are one size fits all years,...

Product#: UPR201405

2005-14 Ford Mustang; Caster Camber Plates for Viking Struts

2005-2014 Ford Mustang Caster Camber Plates for Viking Struts (HD Grade 50 Steel). Steel Caster Camber Plates for Viking Coil Over Struts. These caster camber plates replace the stock flexible strut mounts allowing you to...

Product#: D32102

Detroit Speed; Remote Canister Shock Mounts; JRI Shocks

These billet aluminum canister mounts are manufactured for securing your remote shock canisters to the vehicle. The canisters mount with two 1/4?-20 x 1/2" buttonhead screws. Applications: 1967-81 Camaro 1967-81 Firebi rd...

Product#: 88L352

1994-04 Ford Mustang; 4-Bolt Caster/Camber Plates, Black

Four Bolt Caster Camber Plates for the 1994-2004 Ford Mustang. These new plates add a fourth bolt for added strength for road race, drag race and street cars using front coil over kit suspensions. The black powder coated...

Product#: 88L353

1994-04 Ford Mustang; 4-Bolt Caster/Camber Plates, Silver

2005-2014 Mustang Steel Caster Camber Plates for Viking Coil Over Struts. Caster camber plates replace the stock flexible strut mounts allowing you to install Viking Coil Over Struts for a fully adjustable from end and giving...

Product#: TF500175

Coilover Thrust Bearings

Make changing the ride height on your vehicle simple with a set of thrust bearings. Each set does one pair of coil-over shocks.

Product#: HYP20012250B

Hyperco Coil Over Spring; Barrel-Shaped; 200 lb/in; 12" Tall; 2-1/2" Diameter

Hyperco Coil-Over Spring, Barrel Shaped, 200 lb/in, 12" long, 2-1/2" inside diameter

Product#: A90281

1979-93 Ford Mustang; Rear Strut Bar; Coupe/Hatchback

Fits ANY 1979-93 Mustang or Cobra Installs in your trunk, drilling required but no welding Stiffens rear shock towers, great for those who road race This SMR-BAR Black Rear Shock Tower Brace is a must for any Mustang'er who...

Product#: GF32029

2010-14 Camaro; Billet Strut Covers; Clear Anodized Finish

These strut covers from Drake Muscle Cars are beautifully machined from 6061-T6 billet aluminum and these make a great accent under the hood. Available in your choice of clear, black, or red anodized finishes to suit your...

Product#: GF32030

2010-14 Camaro; Billet Strut Covers; Black Anodized Finish

These strut covers from Drake Muscle Cars are beautifully machined from 6061-T6 billet aluminum and these make a great accent under the hood. Available in your choice of clear, black, or red anodized finishes to suit your...

Product#: 5313880

1939-40 Oldsmobile; Rear Shock Links; Pair

Rear shock links for lever action shock absorbers on all 1939 Oldsmobiles, and 1940 Oldsmobile 60 and 90 series cars. These shock links measure 7-1/4 inches from the center of the stud to the end of the link, and include...

Product#: 5352365

41-51 Oldsmobile; Rear Shock Links; Pair

Rear shock links for lever action shock absorbers on all 1941-50 Oldsmobiles, and 1951 88A models. These shock links measure 8 1/2 inches from the center of the stud to the end of the link, and include bushings and attaching...

Product#: HYP35012250

Hyperco Coil Over Spring; 350 lb/in; 12" Tall; 2-1/2" Diameter

Hyperco Coil-Over Spring, 350 lb/in, 12" long, 2-1/2" inside diameter

Product#: CT80013

1947-55 Truck Front Shock Mounting Bracket Kit

Front shock mount kit for 1947-55 Chevy and GMC trucks. These brackets are used to relocate the shocks when converting to the popular 1969-87 truck power steering box or just to upgrade to a modern style shock. Kit contents...

Product#: 97L573

2005-14 Ford Mustang; ABS Shock Tower Covers; Black

These shock tower covers are designed to fit over the standard OEM bolts on your Mustang. Some 2007 and newer Mustangs have bolts that are a little longer than normal. In this case one of the four bolts or the center bolt may...

Product#: 37109G

1965-70 Impala / Full Size Black Polyurethane Strut Rod Bushing Set; Energy Suspension

Polyurethane Strut Rod Bushing Sets deliver BIG improvements in real world driving for owners of BIG, full size Chevrolets. They are often the choice with street and strip enthusiasts, lowriders, hoppers, and of course,...

Product#: A5500357

88-98 Chevy/GMC 4WD Rear Upper Shock Mount - R. H.

Replacement rear upper shock mount kit for 1988-98 GM 2WD pickup trucks. Includes upper shock mount and hardware. Sold as a kit. Includes Upper shock mount - L.H. Hardware

Product#: A5500358

88-98 Chevy/GMC 4WD Rear Upper Shock Mount - L. H.

Product#: A5500359

88-98 Chevy/GMC 2WD Rear Upper Shock Mount - R. H.

Replacement right rear upper shock mount for 1988-98 Chevy/GMC 2WD pickup trucks. Sold as a kit. Requires two per vehicle. INCLUDES: Left rear shock mount Hardware

Product#: MA1714

1962-76 Dodge/Plymouth A-Body; Rear Shock Mounting Stud; Set

Reproduction of the rear shock upper mounting studs used on 1962-76 A-Body vehicles. Often rusted beyond repair or Brocken from abuse. Machined with the correct wrench flats to assist in assembly to the body. Includes correct...

Product#: D040302R

1967-69 F-Body; Detroit Speed; Mono-To-Multi-Leaf Conversion Shock Plate; RH

Mono-to-multi-leaf conversion shock plate from Detroit Speed and Engineering. These plates will aid in converting from mono-leaf rear springs to multi-leaf rear springs in vehicles not equipped with staggered shocks. This is...

Product#: D040302L

1967-69 F-Body; Detroit Speed; Mono-To-Multi-Leaf Conversion Shock Plate; LH

Mono-to-multi-leaf conversion shock plate from Detroit Speed and Engineering. These plates will aid in converting from mono-leaf rear springs to multi-leaf rear springs in vehicles not equipped with staggered shocks. This is...

Product#: TF422417

1955-57 Chevrolet Full-Size Wagons (Incl Nomad) - Rear Shock access Cover - Chrome (Pair)

Replacement Nomad and wagon rear shock covers for 1955-57 Full Size Chevrolet models. Offered in paint grade steel or chromed.

Product#: K6517

1993-02 Camaro / Firebird; Upper Shock Mount; RH Passenger Side

Aftermarket replacement Right Hand (Passenger Side) upper front shock mount for 1993-02 models. New Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension...

Product#: 901924

1982-92 Camaro / Firebird Upper Front Strut Mount; Front Left Side

Aftermarket replacement Left Hand (Driver Side) upper front shock mount for 1982-1992 Chevrolet Camaro and 1982-1992 Pontiac Firebird models. New Strut Mounts eliminate the vibration and noise caused by old, hardened...

Product#: ALD26

Aldan American; Thrust Bearing Upgrade Kit for Front or Rear Coil Over Shocks w/ 2 1/2 inch springs

Aldan American Thrust Bearing Kit for Coil-Over Shocks. When installed, these thrust bearings make spring adjustment easier when adjusting ride-height or setting spring pre-load. 2.500 in. I.D. x 3.225 in. O.D., Pair, Roller...

Product#: HK16

1964-66 Mustang; Shock Tower Bolt Set; 6 Pieces

Reproduction shock tower bolt set for 1964-66 Mustang. The shock tower bolt kit slips into shock tower to retain shock tower cap. Includes 6 OEM style bolts. Manufactured in zilver zinc material. {fitment}

Product#: MN38100

1964-74 Chrysler, Dodge, Plymouth; Upper Shock Absorber Bushings; Pair

Reproduction of the original upper shock absorber bushings designed for use with 1964-74 Chrysler, Dodge and Plymouth models as listed. Each bushing is manufactured in quality EPDM rubber to correct factory dimensions...

Product#: H14385BK

1967-76 Mopar A-Body - Hotchkis Sport Suspension Strut Rod Protective Boot Kit (Pair)

Product#: MP500403

1962-74 Mopar A/B/E-Bodies - Rear Lower Shock Washer and Nut Set; 6 Pieces

Reproduction rear lower shock washer and nut set for 1962-74 A/B/E models. Washers have the correct concave shape and include the flat dimple around the edge. 6 piece set. {specs} {fitment}

Product#: MN3110

1962-74 B/E-Body Rear Shock Washers & Nuts Set

Reproduction rear shock washers and nuts set for 1962-74 B/E-Body models. Every set includes 2 nuts, 2 outer washers, and 2 inner washers. {specs} {fitment}

Product#: 3A187F

1960-62 Falcon/Comet/Ranchero Strut Rod 4-Piece Bushing Set - 5/8" (prior to 10/15/61)

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for this obsolete part because we now carry the strut...

Product#: TF422416

1955-57 Chevrolet Full-Size Wagons (Incl Nomad) - Rear Shock access Cover - Paint Grade Finish

Replacement rear shock covers for 1955-57 Full Size Chevrolet wagon models. Offered in paint grade steel or chromed.

Product#: MN3109

1962-74 A-Body Rear Shock Washers & Nuts Set

Reproduction rear shock washers and nuts set for 1962-74 A-Body models. Every set includes 4 nuts, 4 outer washers, and 4 inner washers. {specs} {fitment}

Product#: MCM1026

1962-67 Chevy II / Nova Strut Rod Bushing; Sold Indivdually

Keep the lower control arm in alignment by replacing your bushings on 1962-67 models. Sold Individualy. Need 2 for a car.

Product#: 2206925

1962-76 Mopar; Upper Shock Bushing Retainer Washer Set

Excellent reproductions of the upper shock absorber bushing retaining washers used on 1962-76 Chrysler, Dodge, and Plymouth vehicles. Stamped from the correct guage steel with all of the details of an original part and...