Product#: 7828871

1959-79 AMC, GM, Ford, Dodge, Plymouth; Steering Coupler; w/ Power Steering; 13/16"-36 Spline; Various Models

OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or...

Product#: 748565

1977-87 GM; Steering Shaft; with Coupler 3/4" Shaft; Partial Intermediate Lower portion

Service replacement partial intermediate shaft with coupler. This is the lower portion of the intermediate steering shaft for 1979-81 models. Fits between the steering gear box and the steering column shaft. Makes...

Product#: 748612

1955-2002 GM; Steering Coupler Bolt; 12 Point; Grade 8; Each

Reproduction of the 12-point, grade 8 bolt that secures the steering coupler to the steering shaft on most GM vehicles. The original couplers came with a 12-point bolt in the location where tightening this bolt squeezes the...

Product#: 748799

1959-02 Steering Coupler Hardware Set; With 12-Point Bolt

Convenient set of hardware for steering shaft couplers on many GM vehicles. Set includes the (1) 3/8"-24 hex nut and lock washer and (1) 5/16"-24 nut and lock washer. Also includes the 12-point coupler bolt that secures the...

Product#: A15651

3/8"-24 Grade 8 Hex Nut Zinc

Product#: C2553

1960-79 GM Steering Coupler Repair Set ; Various Models

Reproduction of the original steering column coupler components commonly known as the rag joint. These special components can be a weak link between the steering column and the steering gear box. Each set includes the correct...

Product#: 7806391

1959-82 AMC, GM, Ford; Steering Coupler; 3/4" Shaft; 36 Spline; 3-5/32" Diameter; Various Models

OER reproduction of the original steering coupling joint designed for use on various GM and Ford models. This coupler (rag joint) is required to connect the steering column to the steering box. Each steering coupler is...

Product#: 7826542

1977-2004 GM; Steering Coupler; for 3/4" Shaft 30 Spline 2-3/4" Diameter

This OER® Authorized reproduction steering coupling joints are required to connect the steering column box to the steering column. Important: All applications fit vehicles with Power Steering. Unless noted otherwise such...

Product#: 7818568

1970-91 AMC, GM, Chrysler, Ford; Steering Coupler; for 3/4" Shaft; 30 Spline; 3-1/4" Diameter; Various Models

Reproduction steering coupling joint for a variety of AMC, GM, Chrysler, Dodge, Plymouth, and Ford models as listed. This coupler (rag joint) is required to connect the steering column to the steering box. {specs} AMC models:...

Product#: FM110646

1972-93 Ford; Steering Coupler; 3/4" Shaft; 36 Spline; 3-1/4" Diameter; Pins Toward Gearbox

If you're in the market to replace the worn out or damaged rag joint steering coupler choose this OER® Authorized brand new rag joint steering coupler engineered to OE specifications. All units are complete with lower...

Product#: 4115549

1979-87 Dodge D/W Series Truck; Steering Shaft to Steering Box Coupler

Replacement steering column shaft coupling body for 1979-87 Dodge D/W Series trucks, Ramcharger and 1979-81 Plymouth Trailduster. This steering shaft slip joint is designed to match the fit, appearance and function of the...

Product#: MP50118

1966-76 Chrysler, Dodge, Plymouth; Power Steering Shaft to Steering Box Coupler

Reproduction 1966-76 A, B, C and E-Body power steering coupler set. Also fits 1966-82 trucks and vans too. Will not fit cars or any trucks with manual steering. These are needed when changing from manual steering to power...

Product#: FRUJKT6SSPL

1958-77 Chevrolet and GMC Stainless U-joints and Shaft Set

Flaming River stainless steel U-joints and shaft kit. Information: 1" DD X 3/4" DD column U-joint 13/16"- 36 X 34" DD box U-joint 22" Lemgth, 3/4" DD steering shaft Polished finished U-Joint {fitment}

Product#: K61881

1967-81 F-Body, 68-72 Nova Shaft & U-Joints for Factory Column to Chassiworks Power Rack and Pini

This package includes all the parts needed to connect the stock early steering column to the Chassisworks power rack and pinion. Kit includes: Rag-joint flange adapter Lower U-joint 16" collapsible intermedia te shaft Made in...

Product#: MW726

Flaming River Mopar Steering Column Coupler; Power Steering

This coupler is designed to give you more header clearance by eliminating the old rag joint with your stock power steering gearbox. The coupler is "Electroless" nickel-plated for corrosion resistance. Made in t he USA {specs}...

Product#: 3504J

1965-66; Mustang; Flaming River; Short Steering Box Adapter Steering Shaft

This Flaming River short steering box adapter steering shaft gets installed to the original Ford Mustang steering column. The steering shaft weighs four pounds and seven ounces. It ships via UPS. Applications: 1965-1966 Ford...

Product#: K61461

1967-81 F-Body, 1968-72 Nova - Steering Shaft Kit - Flaming River Rag Joint

Aftermarket 1"-DD power rack column shaft set for Street Machine clips. Kit includes: 16.8mm-DD U-Joint for Street Machine power rack 16" 3/4" DD intermediate shaft 1-DD U-Joint For use wit h most laming River and Ididit...

Product#: K61462

1967-68, 70-75 Camaro, 62-67 Chevy II/Nova Steering Shaft Kit for 1"- 48 Ididit Steering Column

Aftermarket 1"-48 power rack column shaft kit for Street Machine clips. Kit includes: 16.8mm-DD U-Joint for Street Machine power rack 16" 3/4" DD Intermediate Shaft 1" - 48 U-joint for Ididit columns Made in USA Note: FOR...

Product#: K61463

1969 Camaro Steering Shaft Kit for 3/4"-36 Ididit Steering Column

Aftermarket 3/4"-36 power rack column shaft kit Street Machine clips. Kit includes: 16.8mm-DD U-joint Street Machine power rack 16" 3/4: DD intermediate shaft 3/4"-36 U-joint for Ididit columns Made in USA Note: FOR...

Product#: FR1949

Flaming River Rag Joint; 3/4" 30 Spline DD

Recommended for use with power steering boxes to absorb vibration and power steering noise. These flexible couplings are used in many OEM style applications to absorb vibration and power steering noise. Flaming River offers a...

Product#: 26068010

1998-02 Camaro, Firebird; Intermediate Steering Shaft Assembly

New reproduction intermediate steering shaft for 1998-02 Camaro and Firebird models. It fits between the steering gear box and the steering column shaft. Made from the same materials and to the same specifications as the...

Product#: BG990004

Manual Drag Link Adapter 1955-1964 Full-Size Ford; 1955-1964 Full Size, 1962-1965 Fairlane, 1963-1965 Falcon, 1963-1965 Ranchero

Manual drag link adapter. Replaces control valve on 61-64 Ford Full-Sized cars equipped with factory style power steering. {fitment}

Product#: BG990003

Manual Drag Link Adapter; 1967-1970 Mustang, 1970-1977 Maverick, 1966-1970 Falcon/Fairlane/Ranchero, 1968-1971 Torino/Gran Torino, 1975-1980 Granada

Manual drag link adapter. Replaces control valve on 67-70 Ford Mustangs and other Ford Mid-Sized vehicles equipped with factory style power steering. {fitment}

Product#: SC1009

3/4"-DD X 13/16"- 36 Spline Power Steering Rag Joint For Ididit Column

To complete your column installation, you should also replace your rag joint. This replacement rag joint is the highest quality on the market. This item wears out over time and miles and should be replaced when installing...

Product#: 3A526A

1964-2018; Mustang; BILLET U-JOINT; 1" DD BOX COLUMN; 1" DD X 3/4"-36

Universal Joint, Steel, Nickel Plated, 1 in. DD, 3/4 in. DD, Sold as each. This Flaming River Billet - Joint steering universal joints are CNC - machined from aircraft - quality billet steel to precision tolerances. They...

Product#: 3A526B

Billet U-Joint; 1" DD Box Column; 1" DD X 9/16"-26

Universal Joint, Steel, Nickel Plated, 1 in. DD, 9/16 in. 26 - Spline, sold as each. This Flaming River Billet - Joint steering universal joint is CNC - machined from aircraft - quality billet steel to precision tolerances....

Product#: SC1011

3/4"- 36 Spline X 3/4"- 36 Spline Manual Steering Rag Joint For Ididit Column

To complete your ididit steering column installation, you should also replace your rag joint. When installing an ididit column in your car, you must use the correct application to match the column output shaft. This rag-joint...

Product#: TF500368

1955-57 Chevrolet Passenger Cars - Power Steering Rag Joint - 18Mm DD X 1" DD

Installation parts are the ones to install the steering box to the column. The 18mm DD x 1"DD rag joint is for an aftermarket column steering column shaft.

Product#: 13446

1958-64 Impala / Full Size 600 Series Power Steering Box U-Joint 3/4"-36 X 17MM DD

Power steering U-Joint 3/4"-36 X 17MM DD for 1958-64 Power Steering Conversion Box Part # 800106. Steering shaft available as Part # 409216.

Product#: RG59089

Rag Joint for Series 400 Power Steering Box; 3/4"-30 Spline w/ Welded on Extension Coupler

Rag Joint for 400 Series power steering gear box conversion. Includes welded-on 3/4"-30 splinded coupler for a complete and safe installation. {fitment}

Product#: TF500002

1955-57 Chevy Bel Air, 150; Steering Shaft Coupler; w/Aftermarket Tilt Column; with 1" DD Output

When rebuilding or modifying your steering system, it is often necessary to replace the worn factory steering shaft coupler or rag joint. These replacement joints are designed with a 500 series box in mind and feature 1" DD...

Product#: GB50730

1958-79 500 Series Power Steering Rag Joint 3/4"-30 For Power Steering Conversion

500 Series power steering conversion gearbox is a key part of a modern, high performance power steering system. The 14:1 ratio unit provides superior control and feedback, thanks to low friction recirculating ball gears. An...

Product#: 13452

3/4-36 X 1 DD Steering U-Joint

Product#: SC1026

1955-66 Tilt Column Shaft Coupler

This coupler connects the intermediate shaft to the ididit steering column on 1962-66 Nova models with a 3/4" 36 spline x 3/4" double D shape.

Product#: CPPUJ7K

U-Joint Black 1"-DD X 3/4"-DD

U-Joint Black 1"-DD X 3/4"-DD

Product#: CPPUJ9K

U-Joint Black 13/16"-36 X 3/4"-DD

U-Joint Black 13/16"-36 X 3/4"-DD

Product#: CPPUJ6K

U-Joint Black 3/4"-DD X 3/4"-DD

U-Joint Black 3/4"-DD X 3/4"-DD

Product#: BG014925

Steering Universal Joint; Steel; 3/4DD X 11/16-36

Steering Universal Joint, Steel, 3/4DD X 11/16-36, 3-1/4" Overall Length, 1-5/8" Outside Diameter. {fitment}

Product#: CPPUJ16K

U-Joint; Black; 3/4"-DD X 3/4"; Smooth

U-Joint Black 3/4"-DD X 3/4"-Smooth. CPP's new black E-coated U-joints are CNC Machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and a Nice E-coated finish will give you that black out...

Product#: BG012564

Steering Universal Joint; Steel; 11/16-36 X 3/4 Smooth Bore

Steering Universal Joint, Steel, 1/16-36 X 3/4 Smooth Bore, 3-1/4" Overall Length, 1-5/8" Outside Diameter. {fitment}

Product#: 30028-BBLP

1967-69 Chevrolet Corvette; Steering Column Coupler; Lower - Replacement Part

Steering Column Coupler Lower, Replacement Part for 1967-1969 Chevrolet Corvette. From restoration to performance, we are proud to offer the highest quality parts for both classic and late models Corvettes. Note: Mounts to...

Product#: MD8071

1962-66 Dodge, Plymouth A & B Body; Lower Steering Shaft Seal

Reproduction of the original lower steering shaft seal designed for use with 1962-66 Dodge and Plymouth A and B Body models. Each seal is manufactured in quality EPDM rubber with a steel insert for durability. This rubber...

Product#: CPPUJ5K

U-Joint Black 3/4"-36 X 3/4"-DD

U-Joint Black 3/4"-36 X 3/4"-DD

Product#: CPPUJ4K

U-Joint; Black; 3/4"-36 X 3/4"-36

U-Joint Black 3/4"-36 X 3/4"-36. CPP's new black E-coated U-joints are CNC Machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and a Nice E-coated finish will give you that black out look....

Product#: CPPUJ2K

U-Joint Black 1"-48 X 3/4"-DD

U-Joint Black 1"-48 X 3/4"-DD

Product#: SC1052

1955-59 Tilt Column Shaft Coupler

This coupler connects the intermediate shaft to the ididit steering column on 1955-59 GM truck models with a 3/4" double D shape.

Product#: 14941

1973-07 GM Trucks Borgeson Rag Joint Repair Set 3-1/4" Diameter with Hardware

This steering column coupler commonly known as the rag joint can be a weak link between the steering column and the steering gear box. When the coupler becomes worn or oil soaked, it can lead to future problems with your...

Product#: MD8026

1965-93 Chrysler, Dodge, Plymouth; Steering Knuckle Kit; For Manual and Power Steering

Restorer's Choice reproduction of the lower steering column "swivel joint" seal and retainer is an exact duplicate of the original factory Mopar steering coupler. Features the correctly configured rubber seal (not a service...

Product#: 155560

1954-60 GM; Rag Joint; For Steering Coupling; Various Models

Steering gear box to steering shaft flexible coupling (rag joint). For power steering unless noted otherwise. See application listings below. Buick Applications: 1956-58 Buick - all models 1959 Buick Lesabre and Invicta with...

Product#: BG312500

Steering Coupler; Steel; 11/16-36 X 3/4 Smooth Bore

Steering Coupler, Steel, 11/16"-36 Spline X 3/4" Smooth Bore. {fitment}

Product#: MD8027

1965-93 Chrysler, Dodge, Plymouth; Steering Coupler Cover Clamp; 3-Inch Coupling Body

Detroit Muscle Technologies stainless steel steering shaft coupler cover clamp for various 1966-73 Chrysler, Plymouth and Dodge models with 3 inch couplings. These stainless safety clips have a satin finish so the look like...

Product#: MW791

1960-76 Chrysler, Dodge, Plymouth; Steering Coupler Steel Retainer; Carbon Steel

The lower steering column "swivel joint" seal retainer is a reproduction of the original for Mopar steering couplers. Carbon Steel like the original Chrysler/Mopar part# 2530 538 {specs} {fitment}

Product#: MW792

1965-93 Chrysler, Dodge, Plymouth; Steering Coupler Retainer; Stainless Steel

Reproduction steering coupler retainer for various 1965-93 Chrysler, Dodge & Plymouth car and truck models as listed. The lower steering column "swivel joint" seal retainer is a reproduction of the original for Mopar steering...

Product#: VF3568A

1929-32 Ford Model A/B, 1932-36 Pickup; Steering Housing End Plate

Steering housing end plate with tube and gasket. Updated design prevents grease from leaking into light switch housing. Replaces Ford part# B-3568-S. {specs} {fitment}

Product#: MW983

1960-74 Mopar; Flaming River Power To Manual Steering Shaft Coupler; 3/4"-36; Polished Stainless Steel Finish

Flaming River power to manual steering shaft coupler for various Dodge, Plymouth, and Chrysler models with factory power steering. This kit makes converting from power to manual steering simple, safe and reliable. Included...

Product#: MW986

1960-74 Mopar; Flaming River Power To Manual Steering Shaft Coupler; 3/4"-36; Polished Stainless Steel Finish

Flaming River manual to power steering shaft coupler for various Dodge, Plymouth, and Chrysler models with factory manual steering. This kit makes converting from power to manual steering simple, safe and reliable. Included...

Product#: MW982

1960-74 Mopar; Flaming River Power To Manual Steering Shaft Coupler; 3/4"-36; Stainless Steel Finish

Flaming River power to manual steering shaft coupler for various Dodge, Plymouth, and Chrysler models with factory power steering. This kit makes converting from power to manual steering simple, safe and reliable. Included...

Product#: MW725

Flaming River Mopar Steering Column Coupler; Manual Steering

This coupler is designed to give you more header clearance by eliminating the old rag joint with your stock manual steering gearbox. The coupler is "Electroless" nickel-plated for corrosion resistance. Made in the USA {specs}...

Product#: L04019P

1958-60 Impala; Bel Air; Biscayne; Steering Column Shaft Coupling Kit

This 1958-60 Chevrolet full size passenger car steering column shaft coupling kit is a reproduction of the original GM parts. The kit includes the steering shaft coupler, clamp bolt and nut, spring wire retainer, rubber dust...

Product#: MW724

1960-74 Mopar; Flaming River Power To Manual Steering Shaft Coupler; 3/4"-36; Plain Steel Finish

Flaming River power to manual steering shaft coupler for various Dodge, Plymouth, and Chrysler models with factory power steering. This kit makes converting from power to manual steering simple, safe and reliable. Included...