Product#: 1253580

1960-77 GM, Chrysler, Dodge, Plymouth; Power Steering Fitting; with Saginaw PS Pump; Cad Plated; Various Models

Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...

Product#: 548375

Power Steering Pump or Smog Pump Bracket Spacer; 3/4" O.D. x 3/8" wide

This spacer is used between the power steering pump and mounting bracket or the smog pump and the mounting bracket on various GM models. Use as required. 3/8" width 27/64" inside dia 3/4" outside dia

Product#: 1253532

1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style

Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...

Product#: 1253531

1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style

Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...

Product#: FR101

1994-04; Mustang; Flaming River; Rack and Pinion Install Kit

This Flaming River Power Rack Installation Kit is for 1994-04 Mustangs. Use this kit to mount and adapt a Flaming River FR40037 power rack & pinion to a Fox body Mustang. Kit Contents FR1504T Mustang Tongue Shaft Adapter...

Product#: 3A533

1965-70 Mustang; Power Steering; Hydraulic Control Ball Stud Repair Kit

The power steering ball and stud repair kit includes the ball, stud kit and all seals necessary to stop leaks and reduce excess play in steering wheel. Fits a wide variety of Ford applications including 1963-70 Falcon,...

Product#: 3A650

1959-80 Ford/Mercury; Power Steering Hydraulic Control Valve Seal Kit

Power steering control valve seal set for numerous Ford and Mercury applications including Mustang, Falcon, Cougar, and Comet. The power steering control valve directs fluid to either side of the steering cylinder. When worn,...

Product#: 3652A

1964-73 Mustang; Ram Cylinder Frame Drop Bracket; Power Steering; Vehicles With Headers

Lowers P/S cylinder to clear header. Required when using headers with 1964-70 cars equipped with power steering.

Product#: 926049

1997-02 Chevrolet, GMC, Cadilllac; Variable Steering Solenoid Bypass Tube

Eliminates the failure-prone original equipment proportioning valve for predictable performance and reliability. Precision-engineered to match the original power steering pump. {fitment}

Product#: 3A764

1957-77 Ford/Mercury; Mustang/Falcon/Cougar/Comet; Power Steering Cylinder Seal Kit

Replacement power steering hydraulic cylinder boot and insulator kit for numerous Ford and Mercury applications including Mustang, Falcon, Cougar, and Comet. The power steering cylinder mounts under the car next to the...

Product#: A8500127

1967-69 GM F-Body & 1968-74 X-Body; Power Steering Return Hose Factory Inspection Stamp; G-23A

During assembly, workers identified correct hoses for placement by the stamp marks on them. This stamp was an identification and date code used on power steering return hoses approximately every three inches. Get an original...

Product#: A8500124

1967-79 Pontiac Engine; Power Steering Pump Rear Stud/Hardware

This power steering pump stud installs on the rear of the pump for attachment to the rear bracket on the block. The stud is available separately or as a set including a flat washer, cup washer, and correct style slot nut.

Product#: HK3

1965-66 Mustang 289 without AC Power Steering Pump Hardware Kit

Power steering pump hardware kit for 289 equipped 1965-66 Mustangs without air conditioning. This kit contains all the original style hardware required to bolt up your power steering pump.

Product#: TF500294

1955-57 Power Steering Cylinder End Bushings

These grommets are exact reproductions of the OEM grommets that hold the power steering cylinder to the center drag link bracket on all 1955-57 full size vehicles and 1955-59 Chevrolet & GMC trucks. {fitment}

Product#: K0156

1968-72 GM Truck; 1965-68 Chevelle/El Camino; Big Block; Power Steering Bracket Stud; Front Exhaust Manifold; Left

Correct replacement stud used to mount the power steering adjuster bracket to the left side exhaust manifold on 1965-68 Chevelle, El Camino and 1968-72 Chevrolet and GMC truck models with a big block engine. This stud...

Product#: D031603

1970-72 Camaro; Detroit Speed; Front Service Kit

Rebuild your front steering components with this kit of selected Moog and DSE parts for an upgraded new car feel. Stock Service Kit includes: Tie Rod Adjusters Inner and Outer Tie Rods Idler Arm Note: Power Pitman Arm Not...

Product#: FS59065

Rag Joint 3/4" DD X 3/4"-30 Spline - Aftermarket Steering Columns

Product#: A8500123

1967-70 Pontiac Engine; Power Steering/Alternator Mounting Hardware

This set contains the correct hardware to mount the power steering pump and alternator on 1967-70 Pontiac engines. Each set has the correct style fasteners with factory markings and finishes for an authentic restoration....

Product#: 2612100240

1965-66 Ididit Steering Wheel Adapter Set

The Ididit steering wheel adapter set is needed when installing a pre-1969 steering wheel to an Ididit steering column for 1965 Impala and 1966 Nova. Set includes the necessary items for the horn to function properly and an...

Product#: MP645

March Performance Self Locking Chrome Power Steering Pulley Nut 9/16"-18 Thread

This chrome plated self-locking nut is designed for aluminum performance power steering pulleys. It can also be used with OE and aftermarket pulleys on Saginaw power steering pumps with a 9/16"-18 threaded shaft. Made in USA

Product#: 1253513

1964-77 GM; Tie Rod End/Spindle Nut Set

This hardware set contains the 20 steering nuts necessary to mount the spindle to the control arms, the tie rod ends to the center link and secure the steering arms.

Product#: 88L253

1985-00 Ford Mustang; Offset Steering Rack Urethane Bushings

Graphite impregnated urethane construction. Won't distort or deform like stock rubber bushings. The ultimate street suspension improvementPhoto may differ slightly from product.

Product#: TF500357

1955-57 Chevrolet Passenger Car - Power Steering Ram Cylinder Shouldered Bolt

Power steering ram cylinder shouldered bolt works on any 1955-1957 Chevy with original style power steering. This bolt joins the steering ram shaft to the center link.

Product#: A8500125

1967-79 Pontiac Engine; Power Steering Pump Rear Stud; M10-1.5 Threads

This power steering pump stud installs on the rear of the pump for attachment to the rear bracket on the block. The stud is available separately or as a set including a flat washer, cup washer, and correct style slot nut.

Product#: FR100

1979-93; Mustang; Flaming River; Rack and Pinion Install Kit

This is a Flaming River Power Rack Installation Kit for 1979-93 Mustangs. Use this kit to mount and adapt a Flaming River FR40037 power rack & pinion to a Fox body Mustang. Kit Contents FR1504T Mustang Tongue Shaft Adapter...

Product#: 1253504

1960-77 Power Steering Pulley Nut & Washer Set; for GM Models

Reproduction power steering pulley washer and nut for various 1960-77 GM models. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16"- 18. {fitment}

Product#: 1253550

1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft

This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...

Product#: 3A754

1961-71 Ford Power Steering Control Valve Ball Stud Socket Sleeve- Various Applications

When rebuilding the power steering control valve on a variety of 1961-71 Ford applications, including 1964-1970 Mustang or 1967-70 Cougar models, this bronze ball stud sleeve should be replaced. This factory style metal...

Product#: A15650

5/16"-24 Grade 8 Hex Nut Zinc; Each

5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...

Product#: MN7506

1962-82 Chrysler, Plymouth, Dodge A/B/C/E-Body; Power Steering Box (14:1 Ratio); 1-1/4" Shaft

A modern power steering box for the 1962-1982 Chrysler, Plymouth, Dodge models. This box fits both factory power & manual steering cars. The Borgeson conversion box offers a 14:1 quick ratio, firm modern power steering feel,...

Product#: MN7507

1962-82 Chrysler, Plymouth, Dodge; Steering Coupler Kit

Steering universal joint & vibration reducer in steel. Couples stock Mopar steering columns to MN7505 and MN7506 Mopar power steering boxes. Stock column must be cut and shortened for installation. Includes drill bit and roll...

Product#: 5685033

1956 Buick Power Steering Gearbox Rebuild Kit

Power steering gearbox rebuild kit for 1956 Buick models. Each kit includes seals, o-rings, and gaskets that are necessary when rebuilding the power steering gearbox in 1956 Buick models.

Product#: 1391413

1953-55 Buick Power Steering Gearbox Rebuild Set

Power steering gearbox rebuild set for 1953-55 Buick models. Each kit includes seals, o-rings, and gaskets that are necessary when rebuilding the power steering gearbox in 1953-55 Buick models.

Product#: PSK6062

1960-62 Chevroley/GMC 1/2 Ton Truck - 500 Series Power Steering Gearbox Adapter

This power steering conversion gear box adapter is a great asset to updating your power steering system. Applications: 1960-62 Chevrolet/GMC 1/2 Ton Truck

Product#: TF500292

1955-57 Chevrolet Bel Air, 150, 210; Center Link Adapter; Power Assist Center Link to Power Steering Conversion Gearbox

This adapter screws onto end of the stock power assist style draglink in place of the factory power steering control valve. Allows for simple conversion from factory power assist style steering to the more modern pump and box...

Product#: MN7510

1967-76 A/B/E-Body Power Steering Return Nipple - 3/8"

Note: 1966 and earlier Steering Gears had Nipples that were 1/2" and/or 5/8". You may receive a nipple either straight, or 45 degree, depending on supplies available. Applications: 196 7-76 A/B/E-Body with power steering

Product#: 5683483

1956-57 Buick Power Steering Pump Rebuild Kit

Includes necessary o-rings, seals and gaskets to re-seal the power steering pump on 1956-57 Oldsmobile 88, Super 88, and 98 models, 1956-57 Buick, 1956-57 Pontiac.

Product#: 5682664

1953-55 Buick Power Steering Pump Rebuild Set

Power steering pump rebuild set for 1953-55 Buick models. This kit includes seals and gaskets required when rebuilding the power steering pump.

Product#: MD47279

1968-76 Dodge, Plymouth; Saginaw Power Steering Pump Mounting Hardware Set

This steering pump hardware set can be used to install most Saginaw power steering pumps for 1960-76 Didge and Plymouth models as listed. Comes complete with all the bolts, washers, and nuts required to mount the power...

Product#: 1253511

1964-79 GM; Pitman Arm Nut/Washer Set

Reproduction gear box steering arm large nut and lock washer set. This nut and washer mount the steering pitman arm to the manual or power steering gear box. Applications: 1967-72 Camaro 1967-72 Firebird 1964- 72 Impala /...

Product#: MN7512

1962-76 Saginaw Power Steering Pump Pulley Retaining Nut

Most people think this is a regular nut that can be found anywhere. Then they find out it isn't! This is a special nut that is very hard to come by or find. It is manufactured to solve this issue.

Product#: 372896B

1967-70 Ford, Mercury; Power Steering; Control Valve; Hose Seats; 5/16"; Various Models

Reproduction of the original power steering control valve hose tube seats for use on 1967-76 Ford and Mercury models as listed below. Includes a set of four 5/16" power steering control valve tube seats. These hose seats...

Product#: 3967424

1969-84 GM; Power Steering Front Bracket to Pump Spacer

Correct spacer which fills the gap between the front power steering adjuster bracket and the milled space on the front of the power steering pump on most 1969-77 Chevrolet passenger car models equipped with a small block...

Product#: MN7505

1962-76 Chrysler, Plymouth, Dodge; Power Steering Box (14:1 Ratio); 1-1/8" Shaft; Conversion

MN7507 Mopar vibration reducing universal joint coupling to the shortened steering column shaft. Drill bit and pins included with coupler. Use MN7508 hose set for Saginaw pumps. Popular Applications: 1962-72 Chrysler C-body...

Product#: 5685263

1957-58 Buick Power Steering Gearbox Rebuild Set

Power steering gearbox rebuild kit for 1957-58 Oldsmobile, Buick, Cadillac and Pontiac models. Kit includes all o-rings, seals and gaskets necessary to rebuild your unit.

Product#: PSK6366

1963-66 Chevroley/GMC 1/2 Ton Truck - 500 Series Power Steering Gearbox Adapter

This power steering conversion gear box adapter is a great asset to updating your power steering system. Applications: 1963-66 Chevrolet/GMC 1/2 Ton Trucks

Product#: 3C651A

1957-77 Ford/Mercury; Mustang/Falcon/Cougar; Power Steering Cylinder Boot & Insulator Kit

Replacement power steering hydraulic cylinder boot and insulator kit for numerous Ford and Mercury applications including Mustang, Falcon, Cougar, and Comet. The power steering cylinder mounts under the car next to the...

Product#: 5685766

1958 Buick/Oldsmobile; Power Steering Pump Rebuild Set

Each rebuild kit includes the necessary o-rings, seals and gaskets to re-seal the power steering pump on 1958 Oldsmobile Dynamic 88, Super 88, and 98 models (except models equipped with Air Ride Suspension), and 1958 Buick...

Product#: 3C511A

1967-69 Ford, Mercury; Power Steering Pump; Tension Adjust Bracket

Reproduction steering pump tension adjusting bracket for various 1967-69 Ford and Mercury models including Mustang, Cougar, Fairlane, and Ranchero. The bracket is designed for use along with the larger adjusting bracket to...

Product#: PS20038F

3/8" Magna-Pure Power Steering Filter

In-line Magna-Pure Filter - Serviceable Magnetic filter element with patented built in bypass for optimal performance; filters up to 190 micron particles. Protects the entire steering system from contmination. Flushing the...

Product#: MD47207

Mopar Small Block With Saginaw Pump Bolt /Spacer Set

If your Mopar small block has a Saginaw pump but no power steering pulley, this special bolt and spacer set is the solution! This set mounts big block power steering pulleys: MD2381, MD2382, MD2383, and MD2384 on your small...

Product#: G7072

1964-96 Lash Adjustor Nut

GM service replacement part of the original lash adjuster. 7/16"-20 thread. Applications: 1967-74 Camaro with power steering 1977-86 Camaro with power steering 1967-74 Firebird with power steering 19 77-86 Firebird with power...

Product#: MN7511

1962-68 A/B-Body Power Steering Fitting - 1/4" To 5/16"

Fitting is used when changing to a Saginaw pump and line, and the steering box fitting Is the incorrect size. This replaces that with the correct fitting size from 1/4" SAE to 5/16" SAE. Applications: 1962-68 A/B-Body with...

Product#: 1253572

1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN

This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....

Product#: 1253574

1962-02 GM, Chrysler Dodge, Plymouth; Saginaw Power Steering Pump Stud And Bolt Kit; with Chrome Plated Bolts

This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...

Product#: 14344

1970-81 GM; Motor Mount Bolt; 7/16"-14 x 4-5/8"; Stamped "RSC"; Each

Reproduction bolt used to mount the steering box to the frame. Will work on both power or manual steering boxes. This is a 7/16" bolt that is 4-5/8" long. The bolts are made from high strength grade 8 steel which as been...

Product#: 1253573

1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts

This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...

Product#: 1253570

1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish

This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...

Product#: 1253575

1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit

Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...

Product#: 1253571

1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish

This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...