Product#: MT80862Z

1970-74 Various GM Vehicles Including Camaro, GTO, Skylark, Cutlass; Gear Kit; Muncie M22; Close Ratio 2.20; 26 Spline; 26 Tooth

This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...

Product#: MT80861Z

1965-70 Various GM Vehicles Including Chevelle, 442, Wildcat; Gear Kit; Muncie M22; Close Ratio 2.20; 10 Spline; 26 Tooth

This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...

Product#: CP4946G

1967-72 Pontiac GTO, LeMans, 1967-70 Tempest; 4-Speed Manual Transmission; Hurst Shifter With Ball Knob

Reproduction Hurst Competition Plus shifter assembly to fit and look like what was originally used in the 1967-72 Pontiac GTO, LeMans and 1967-70 Tempest models with 4-speed manual transmission. It features a chrome round bar...

Product#: 3934286

1967-68 Camaro; Floor Shifter Assembly; ITM Style; Muncie 4/Speed

Quality OER® reproduction ITM Style shifter assembly for 1967-68 Camaro models with 4-speed transmission. Assembly will replace worn or damaged originals. This shifter mounts to your crossmember just like the factory...

Product#: CP9068Z

1970-72 GTO, Tempest, LeMans, Skylark, Cutlass; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set

Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1970-72 Pontiac GTO, LeMans, Tempest, Buick Skylark, Oldsmobile Cutlass and 1970-71 442 models with a 4-speed Muncie manual transmission....

Product#: CP5200Z

1967-68 Skylark, Cutlass, GTO, Grand Prix; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set

reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1967-68 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. These are 3/8? diameter...

Product#: MT52882Z

1966-70 Various GM Vehicles Including Impala, GTO, Skylark Models; Rebuild Kit; Muncie 4 Speed; M20, M21, M22

Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market.  This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...

Product#: MT52883Z

1970-74 Various GM Vehicles Including Camaro, Firebird, Regal; Rebuild Kit; Muncie 4 Speed; M20, M212, M22

Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick...

Product#: 3973966

1970-81 Camaro, Firebird; Upper Floor Shift Boot, with Manual Trans

Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...

Product#: 3734354

1965-67 Chevy II / Nova; Hurst Competition Linkage Kit; Muncie Transmission; 4 Speed

Hurst competition linkage kit for use with 1965-67 Chevy II Nova models equipped with Muncie 4/speed transmissions. This installation kit includes all the necessary components and hardware required to replace the linkage. It...

Product#: 9793565

1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter

Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...

Product#: 3921147W

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...

Product#: 14089466

1982-02 Camaro, Firebird; Round Shift Knob; Leather Wrapped; Manual Trans; Black

Reproduction of the factory original leather-wrapped shift ball to fit various 1982-02 Camaro Z28 and Firebird models equipped with 5-speed and 6-speed manual transmissions. Each reproduction shift ball is manufactured in...

Product#: MT3194Z

1964-66 Pontiac GTO, LeMans, Tempest; Clutch Bell Crank; Cross Shaft

New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....

Product#: 3921147B

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...

Product#: MT3195Z

1966-67 Various GM Vehicles Including Skylark, LeMans, GTO; Clutch Bell Crank; Cross Shaft; Z-Bar

New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....

Product#: 3922525

1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;

Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...

Product#: 748742

1958-88 Buick, Chevrolet, Pontiac, Oldsmobile; Clutch Bell Crank Z-Bar Pivot Bushing Set; 4 Piece Set

This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...

Product#: MT3197G

1968-72 Pontiac GTO, LeMans; Swivel Assembly; Clutch Cross Shaft; Z-Bar

New factory reproduction cross counter shaft swivel assembly. This swivel assembly fits Pontiac GTO and LeMans. It Mounts on the motor side of the cross shaft. Must order the cross shaft to make a complete assembly.

Product#: MT3196G

1968-72 Pontiac GTO, LeMans; Clutch Bell Crank; Cross Shaft; Z-Bar

New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....

Product#: CP10763Z

1969-72 GTO, Cutlass, Skylark; Hurst Shifter; Mounting Bracket

Reproduction of the Hurst shifter mounting bracket for various GM applications including GTO, Skylark, Cutlass models. This is an identicalMade from stamped steel and has a gold zinc coating for corrosion resistance and...

Product#: 14019443

1982-86 Camaro, 1991-99 Camaro, 1982-83 Firebird; Shift Knob Ball; with Manual Transmission; Black

Correct reproduction shift knob for 1982-86 Camaro, 1991-99 Camaro, and 1982-83 Firebird / Trans Am models. Each knob is manufactured to correct factory dimensions replicating the original shift knob in design, appearance,...

Product#: MT3207Z

1964-66 Pontiac GTO, Oldsmobile Cutlass, Buick Skylark; Upper Clutch Rod

Reproduction of the correct clutch rod for 1964-66 Pontiac GTO, Oldsmobile 442 and Buick Skylark models. Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from...

Product#: CP6105C

1968-72 Chevelle, El Camino, Skylark, Cutlass 1970-72 Monte Carlo; 4-Speed Manual Transmission; Shifter Support Bracket

Muncie 4-speed manual transmission shifter bracket for 1968-72 Skylark, Cutlass, Chevelle, El Camino and 1970-72 Monte Carlo models. This bracket is welded to the transmission crossmember and the shifter mounts to it. Used to...

Product#: CP1608G

1964-66 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass; Manual Transmission; Hurst 4-Speed Shifter; Adapter Bracket

Cast aluminum Hurst 4 speed shifter mounting plate/bracket for 1964-66 Pontiac GTO, LeMans, Tempest and 1964-66 Oldsmobile Cutlass models. This reproduction shifter bracket allows the factory Hurst 4-speed to a Muncie...

Product#: 3899019

1967 F-Body Frame Side Clutch Pivot Ball Bracket

OER® Reproduction of the frame side clutch pivot ball bracket. Features the correct offset and holes as original and is used for L6, small block and big block models. Applications 1967 Camaro 1967 Firebird You are assured...

Product#: MT3687Z

1968-72 Various GM Vehicles Including Chevelle, LeMans, Cutlass; Upper Clutch Rod; Pedal To Z Bar

Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...

Product#: CP10020Z

1969 Pontiac 4-Speed Shift Knob Insert

Reproduction domed polyurethane shift knob insert for the 4-speed shift knob on all 1969 Pontiac models except for Grand Prix. Features the shift pattern in silver over a red and black bullseye design with bright chrome...

Product#: F872

1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst

Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...

Product#: CP10456S

1967-72 Buick Skylark, Gran Sport, GS 400, GS 350, GS 455, GS; Hurst Competition Plus; 4-Speed Shifter Body

Quality reproduction of the 1967-72 Hurst Competition shifter for various 1967-72 Buick Skylark, Gran Sport, GS 350 and GS 400 models. The shifter is designed for vehicles with or without a console and either bucket or bench...

Product#: 3917586

1967-68 Camaro; Floor Shifter Assembly; with Saginaw 4/Speed; ITM Style;

Reproduction of the original ITM Style shifter assembly for 1967-68 Camaro models with a Saginaw 4-speed transmission. Each shifter is manufactured to factory specifications for an authentic appearance and fitment Mounts to...

Product#: 3866568

1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length

This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...

Product#: CP9066Z

1969 GTO, Tempest, LeMans, Skylark, Cutlass; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set

Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1969 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. Shifter tabs are die stamped,...

Product#: 3733643

1965-67 Impala/Full Size; Shift Linkage Install Kit

1965-1967 Impala / Caprice / Bel Air Linkage Install Kit including Shifter Rods, Lever Arms & Bracket for Hurst 4 Speed 3912747 Competition Plus Shifter connected to factory Muncie type 451 transmission. Replaces OE #...

Product#: 3733163R

1955-67 4/Speed Shifter Linkage Installation Kit; for Hurst Competition Plus Shifter;with Muncie Transmission

A reproduction installation set for use when installing a Hurst Competition Plus shifter on 1968 and earlier Muncie 451 transmission. See various applications listed. Can also be used for custom installs on various passenger...

Product#: 3737834R

Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions

Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...

Product#: A8800102

1970-74 Camaro, Firebird; Muncie Reverse Lock Out Linkage Set; 4 Speed; Small, Big Block

Reproduction of the original style lock out linkage set for 1970-74 Camaro and Firebird models with Muncie 4-speed transmissions. Designed for use with small block or big block models. Includes fully assembled bellcrank,...

Product#: 3961437W

1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...

Product#: 3893853

1967-69 Camaro; Floor Shift Boot, without Console; Manual Trans

Reproduction of the original floor shift boot for use on all 1967-68 Camaro 3 and 4 speed models without center console. Also fits 1969 Camaro 3 speed models without center console. The lower boot is manufactured from quality...

Product#: MT4942Z

1969-72 Various GM Vehicles Including GTO, Skylark, Cutlass; Muncie Manual Transmission Reverse Lockout Kit

We now have a correct factory reverse lockout kit used on various GM models which include 1969-72 Pontiac GTO, Buick Skylark, Oldsmobile Cutlass models. Kit includes: Reverse tab - mounts on trans; rod that goes from the...

Product#: 3914896

1967-69 Camaro Big Block, 1968-72 Chevy II / Nova Big Block Clutch Fork Return Spring

OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 5-1/8" O.L. 2-3/4" spring portion. You are assured that every OER® part offe red is...

Product#: MB760

1968-70; Dodge, Plymouth B-Body; Shift Boot; Manual Trans; with Floor Shift; without Console

Reproduction of the original console lower shift boot for use on 1968-70 Mopar B-body models with floor shift manual transmission without console. Replace the deteriorated or missing shift boot to seal the area around the...

Product#: F47081

1970-81 Firebird, Trans Am; Shift Knob with Chrome; 4 Speed

Reproduction of the 4 speed shift knob originally installed on 1970-81 Pontiac Firebird models with 4/speed manual transmissions. Each shift knob features the correct grained grip, raised 4/speed pattern emblem, and installs...

Product#: 152954

1982-92 Camaro, Firebird; Lower Shift Boot; T-5; 5-Speed

Reproduction of the original lower shifter boot for use with 1982-1992 Camaro and Firebird models. Manufactured to factory specifications with pre-punched mounting holes. This is the lower boot that is bolted to the shift...

Product#: 3961437A

1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base

Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...

Product#: 9794301

1969-1971 Pontiac Firebird; GTO, LeMans; Shift Knob; Walnut Wood; Shift Pattern

Reproduction walnut Hurst Muncie shift knob with shift pattern for 1969-71 Pontiac Firebird, GTO and LeMans. This knob has 3/8" coarse threads and four speed shift pattern and has the correct walnut grain pattern. {specs}...

Product#: 3912606

1967-72 Clutch Fork Return Spring Extension Bracket ; Big Block

OER® reproduction of the original clutch fork return spring bracket installed on various GM models with a factory installed big block engine. Allows correct function and mounting of the clutch fork return spring....

Product#: CP10484Z

1969-72 Cutlass, Skylark, GTO, GS; Hurst Shifter 3 Piece Tab Set

Reproduction Hurst shifter tab set for 1969-72 Pontiac GTO, Oldsmobile Cutlass, 442, W30, W31, Buick Skylark models with a Hurst shiter. These shifter tabs are die stamped they fit very and are a press to fit installation....

Product#: MT3209G

1968-72 Pontiac GTO; Upper Clutch Rod; Pedal To Z Bar

Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...

Product#: CP1609G

1967-72 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass; Manual Transmission; Hurst 4-Speed Shifter; Adapter Bracket

Cast aluminum Hurst 4 speed shifter mounting plate/bracket for 1967-72 Pontiac GTO, LeMans, 1967-70 Tempest, 1969-72 Pontiac Grand Prix and 1967-72 Oldsmobile Cutlass models. This reproduction shifter bracket allows the...

Product#: 1050080

1967-1992 Chevrolet Camaro, Pontiac Firebird; Transmission Shift Control Lever; Hurst Quarter Stick shifter and Dual Gate Shifter Arm

Hurst Quarter Stick shifter and Dual Gate Shifter Arm transmission select lever for 1967-92 Camaro and Firebird using a Trubo-Hydramatic 350 or 400 tranmissions. using Hurst Quarter Stick shifter 3160001, 3160006 and 3160016,...

Product#: CP2029Z

1964-1981 Various GM Applications; Hurst 4 Speed; Shift Retainer Plate GM# 1952029

Replacement shifter retainer plate designed to tighten up worn Hurst 4 speed shifters for various 1964-81 GM models including Impala, GTO, Skylark models. The heavy stamped steel plate bolts between the shifter arm and body...

Product#: CP2497Z

1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield

Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...

Product#: MT80863Z

1970-74 Various GM Vehicles Including Camaro, Firebird, Skylark, Cutlass; Gear Kit; Muncie M22; Wide Ratio 2.52; 26 Spline; 21 Tooth

This is the finest gearset kit on the market.  This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...

Product#: A5403

1964-67 Chevy II Nova; Muncie Shifter Kit; 4 Speed ; with Bucket Seats

Factory-look Muncie shifter assembly for use with 1964-67 Chevy II Nova models with bucket seats. The stock Muncie shift gates were prone to malfunction. This kit maintains the look of the original shifter while increasing...

Product#: 3974526

1967-69 Camaro, 1968-73 Nova; Floor Shift Boot, with Floor Console, Manual Transmission

OER reproduction of the original floor shift boot manufactured in quality molded rubber replicating the original GM boot in authenticity and fitment. Originally installed on all 1967-68 Camaro models with 4 speed trans, 1969...

Product#: 3973970

1970-81 Camaro, Firebird; Gearshift Boot Retainer Plate; for Manual Trans; Black

Reproduction shift boot retainer plate for 1970-81 Camaro and Firebird models with 3-speed or 4-speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel replicating the original design...

Product#: 3899021

1967-72 Small Block Clutch Fork Return Spring

OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 3-5/8" O.L. 2-1/2" spring portion. Applacations: 1967-69 Camaro small block 1967-69 Firebird...

Product#: 3899022

1967-75 Return Spring Extension Rod

Correct reproduction of the original return spring extension rod designed for use on various GM models as listed. This rod is used in conjuntion with the clutch fork return spring. Together they connect the clutch fork to the...

Product#: 3990467

1970-81 Camaro, Firebird; Lower Shift Boot Seal; with Manual Trans

Reproduction of the original lower shift boot seal designed for use with 1970-81 Camaro and Firebird models with manual transmissions. Each boot is manufactured in quality EPDM rubber replicating the original in design,...