Product#: 3899847

1967-68 Camaro, 1968 Chevelle, El Camino; Headlight Bezel Nut Set ; Set of 10

Reproduction of the original style barrel nuts designed for use on 1967-68 Camaro models. These unique barrel shaped plastic insert nuts press into the steel frame and provide a secure anchor for the trim screws. These...

Product#: MN1776

1968-71 Dodge, Plymouth A, B, E-Body; Headlamp Adjustor Hardware Set with 4 Lamp System

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1968-1971. This nut and screw assembly mounts directly to the headlamp housing and enables...

Product#: 496096

1974-78 Pontiac Headlight Beam Adjuster Spring

Reproduction headlamp adjusting beam spring for 1974-78 Firebird models. Applications: 1974-78 Firebird models Note: Also fits: 1971-72 Grand Am & Lemans and 1971-75 Catalina & Grand Pr ix

Product#: K522

1967 Camaro RS; Headlight Bushing and Washer Set; 14 Piece Set

If you are rebuilding a 1967 Rally Sport headlamp assembly, then you'll want to replace the upper and lower headlight bushings. These bushings will help promote a smooth and efficient operation when the headlamps are...

Product#: 3898136

1967 Camaro; Rally Sport Outer Headlamp Door Cover; RH Passenger Side

Correct reproduction of the original headlamp return cover designed for use on 1967 Camaro Rally Sport (with hidden headlamps) models. Manufactured in injection molded ABS to factory specifications. This headlamp cover will...

Product#: 6027292

1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...

Product#: K1116

1968 Camaro; RS Headlamp Bell Crank Spring and Bracket Set ; 8 Piece Set

Keys onto lower end of headlamp bell crank and acts as an over center counter balance assist. This set includes two attachment brackets which install on the lower edge of the headlamp housing and allow correct closure of the...

Product#: 3903453

1967-69 Camaro; Rally Sport Headlamp Hinge Pivot Bolt; Each

Reproduction of the original bolt used to pivot the Rally Sport headlamp doors on 1967-69 Camaro models. This bolt installs through the control opening hinge and attaches the hinge to the headlamp housing on RS (hidden...

Product#: *R329

1979-81 Pontiac Firebird; Headlight Bezel Nut Kit; 16 Piece Set

Reproduction of the original style nuts used to install headlight bezels on 1979-81 Pontiac Firebird models. Each nut is manuactured to factory specs replacing the old or missing originals exactly. 16 piece set. {fitment}

Product#: 3929949

1968 Camaro; Rally Sport; Headlight Bellcrank; LH Drivers Side

Reproduction of the original 1968 Camaro Rally Sport bellcrank. The bellcrank installs from the headlamp actuator to the main headlamp housing assembly and enables the headlamp door to open and close when activated. Includes...

Product#: TF401006

1957 Chevy Bel Air, 150, 210, Nomad; Headlamp Bezel Screw Set

Reproduction headlamp bezel screws for all 1957 models. Manufactured in the correct size and finish. One set required per vehicle.

Product#: 3925457

1968-69 RS Headlamp Bellcrank Bushings ; 4 piece set

Reproduction of the original headlamp bellcrank bushings designed for use on 1968-69 RS Camaros with the hidden headlamp option. The bushings for on the upper and lower bellcranks. Manufactured with injection molded tooling...

Product#: CX1975

1969-79 GM; Headlamp Bulb Adjusting Spring; Various Models

OER® reproduction headlamp bulb adjusting spring for 1970-73 Camaro, 1969-72 Chevy, GMC truck, 1971-72 Monte Carlo, 1971-75 Vega, and various GM models as listed. Manufactured from high quality carbon steel music wire as...

Product#: 3899863

1967-69 Camaro; Rally Sport; Headlight Hinge Bolt Set; Short; Set of 3

Reproduction of the original one-piece, shouldered stud headlight bolts designed for use on 1967-69 Rally Sport Camaros. This set includes 3 hinge bolts which are used to mount the control opening hinge to the control arm...

Product#: 3898135

1967 Camaro; Rally Sport Outer Headlamp Door Cover; LH Driver Side

Correct reproduction of the original headlamp return cover designed for use on 1967 Camaro Rally Sport (with hidden headlamps) models. Manufactured in injection molded ABS to factory specifications. This headlamp cover will...

Product#: K7917

1967-68 Camaro RS; Headlamp Door Screw Set; 8 Piece

Reproduction of the correct screw set designed to install the black outer headlamp door to the rear headlamp backing plate. Manufactured in black oxide that matches the original GM screw, this phillips head reproduction is...

Product#: 4917702

1967 Camaro; Rally Sport; Headlight Output Arm; Each

OER reproduction of the original headlamp output arm, commonly known as the bellcrank on 1967 Camaro Rally Sport models. Attaches to the return cover door assembly and the headlamp motor. The stamped steel arm, when...

Product#: 3929950

1968 Camaro; Rally Sport; Headlight Bellcrank; RH Passenger Side

Reproduction of the original 1968 Camaro Rally Sport bellcrank. The bellcrank installs from the headlamp actuator to the main headlamp housing assembly and enables the headlamp door to open and close when activated. Includes...

Product#: 459461

1979-98 Chevy GMC Pickup, Blazer, Jimmy, Suburban; 1979-84 Van; Headlamp Mounting Spring; Each

Reproduction headlamp mounting spring for various GM models. This headlamp spring is used to mount the headlight beam. Fits 1979-84 Chevy Vans, and 1979-91 Chevrolet and GMC C/K and R/V pickup, Blazer, Jimmy, and Suburban...

Product#: 3903454

1967-69 Camaro; RS Headlight Hinge to Housing Bushing; Each

Reproduction of the original style bushing that's part of the 1967-69 Camaro RS hidden headlamp hardware. This special bushing is designed to hold the headlight hinge to the headlight housing. 2 required per housing. 4...

Product#: 5638498

1968-69 Camaro; Raly Sport Headlight Vacuum Relay Valve Assembly

Quality reproduction of the original GM headlight relay switch assembly designed for use on 1968-69 Chevrolet Camaro models with Rally Sport (hidden headlight) option. The relay works with the headlight switch on RS models to...

Product#: 1235816

1968-79 Buick, Chevy, Olds, Pontiac; Headlamp Beam Adjusting Screw And Nut; Each

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various 1968-79 GM models. This nut and screw assembly mounts directly to the headlamp housing and enables the headlamp...

Product#: K448

1968-69 Camaro; Rally Sport Headlamp Pin & Clevis Set

Reproduction of the original pin and clevis set designed for use with 1968-69 Camaro RS models with hidden headlamps. The pin and clevis is required to hold the headlight vacuum actuator to the bracket. This is a high quality...

Product#: K6500

1965 Impala, Bel Air, Biscayne; Headlamp Bezel Lower Clip; Each

This is a reproduction headlamp bezel lower clip for 1965 GM Impala and full size vehicles. These lower clips are manufactured from injection molded tooling replicating the original in quality, design and fitment. This clip...

Product#: MN1775

1968-71 Mopar Headlamp Adjustment Set ; with 2 Lamp System ; A, B, E-Body

Reproduction of the original headlamp adjustors designed for use on 1968-71 A, B and E body Dodge and Plymouth models with a 2 headlamp system. Includes 4 correctly produced adjustors, 2 springs and 2 screws. Applications:...

Product#: 3957029

1969 Camaro, Chevelle, Nova; Headlamp Washer Nozzle Set; 4 Piece Set

Exact reproduction of the original type headlamp washer nozzles designed for use on various 1969 GM models. These special windshield washer spray nozzles were standard equipment for all 1969 Rally Sport Camaros, and optional...

Product#: 3925461

1968 Camaro; Rally Sport Headlight Actuator Bracket; Large, Rear; LH Driver Side

Reproduction of the original headlight actuator support bracket designed for use with 1968 Camaro models with the Rally Sport (hidden headlight) option. This bracket supports the rear portion of the headlamp actuator canister...

Product#: K8093

1967 Camaro; Rally Sport Headlight Nut & Washer Set; 8 Piece Set

OER® reproduction of the original washers and shouldered nuts designed for use with 1967 Camaro Rally Sport models. This nut and washer set is required for the attachment of the output arm to the headlamp motor assembly....

Product#: *333798

1974-77 Chevrolet Camaro; Headlamp Bezel Installation Hardware; Standard & RS

Reproduction of the original mounting hardware used to install the headlamp bezels for 1974-77 Camaro models. This hardware set is used to mount the headlamp bezel to the headlamp housing. Includes hardware for both RH and LH...

Product#: 4919653

1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid

Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...

Product#: 748594

1970-73 Headlamp Bezel Mounting Set ; Firebird, Trans Am

Reproduction of the original nut and screw set designed to install the headlamp bezel on 1970-73 Pontiac Firebirds models. Each set includes 3 nuts and 3 screws that install 1 headlight bezel. 2 sets required to install both...

Product#: 3945711

1969 Camaro Rally Sport; Headlight Hinge; RH or LH; Each

Reproduction of the original Rally Sport headlight hinge designed for use with 1969 Camaro Rally Sport models. Each hinge is manufactured in quality die-cast and unpainted, matching the original in design, appearance, and...

Product#: K7918

1967-68 Camaro RS; Headlamp Door Molding Rivets; 10 piece set

Reproduction of the original headlamp door molding hardware for use on 1967-68 Camaro RS models. These original style reproduction rivets fasten the outer headlamp door molding to the headlamp door. 5 rivets required per side...

Product#: *333799

1974-77 Camaro: Z/28 Headlamp Bezel Hardware Set; RH & LH

Reproduction of th eoriginal hardware used to install the headlamp bezel to the headlamp housing for 1974-77 Chevrolet Camaro Z/28 models. Includes both driver and apssenger side hardware. One set required per vehicle....

Product#: 3986886

1969-77 Camaro, Chevelle, Nova, X Body; Headlamp Switch Knob and Stem; with Lamp Logo; Various Models

Reproduction of the original style headlamp switch stem and knob designed for use on various GM models including 1972-75 Camaro models. This pre-assembled pullout headlamp switch includes the rod and knob. Features the...

Product#: 14014

1958-1966 Bel Air, Impala; 1958-72 Chevy, GMC Truck ; Headlamp Mounting Bucket & Trim Ring Set; 2 Tab; 8 Piece Set

OER®reproduction of the original 2-tab headlamp mounting buckets and headlamp mounting rings designed for use on various GM vehicles including 1958-61 Chevrolet trucks and 1958-72 GMC pickup truck models. Each headlamp...

Product#: 3958005

1969 Camaro; RS Inner Headlamp Door; Die-Cast Chrome; LH Driver Side

Reproduction of the original chrome inner headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each chrome headlight door is manufactured in zinc alloy die-cast metal and chrome plated to a...

Product#: 5966170

1976-88 GM; Headlamp Retaining Ring; Rectangular Style; Stainless Steel; 4" x 6" Lamp Design; Each

Reproduction of the original headlamp headlamp retaining ring designed for use with various 1976-1988 GM passenger car and trucks models. Each rectangular retaining ring is manuactured in quality stainless steel replicating...

Product#: R2553

1969 Camaro Rally Sport Headlight Hose Set; with Color Hoses; Diagram Included

OER® reproduction of the original vacuum hose set designed for use on 1969 RS Camaro models. This reproduction hose kit is designed and manufactured to exact factory specifications including correct size vacuum hoses and...

Product#: 3958003

1969 Camaro; Rally Sport Outer Headlight Door; Black; Paint to Desired Color; LH Drivers Side

Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...

Product#: 3958004

1969 Camaro; Rally Sport Outer Headlight Door; Black; Paint to Desired Color; RH Passenger Side

Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...

Product#: 3918873

1967-68 Camaro; Rally Sport Headlight Door Hinge; RH or LH; Each

Reproduction of the original RS Camaro headlight hinge that pivots the headlamp concealment door assembly when the headlights are activated. Manufactured in OEM zinc die-cast material. Hinge was installed on both the LH and...

Product#: 1493541

1968-71 Dodge, Plymouth; Headlamp Adjuster Screw And Nut Assembly; Each

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1968-1971. This nut and screw assembly mounts directly to the headlamp housing and enables...

Product#: 3909542

1967 Camaro; Rally Sport Relay Mounting Bracket

Reproduction relay mounting bracket for 1967 Rally Sport models with hidden headlamps. Unique to the Rally Sport model only, this mounting bracket held the three headlamp relays and the power circuit breaker. If your 1967 was...

Product#: 3925456

1968 Camaro RS; Headlamp Bellcrank Shaft & Lever Supports; RH or LH; Pair

Reproduction of the original headlamp bellcrank shaft and lever support designed for use on 1968 Camaro RS models. These supports are used to support the shaft and lever assembly for the headlamps on RS (hidden headlamp)...

Product#: ME9901

1971 Challenger Headlamp Bezel Screw Set ; 10 Piece Set

This OER® reproduction headlamp bezel screw set is designed to replicate the 1971 Challenger headlamp screw tha t secures the headlamp bezel to the vehicle. Each set includes 10 of the correct chrome phillips head #8...

Product#: *R493

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...

Product#: 5638486

1968-69 Camaro RS Headlamp Vacuum Actuator; with Concealed Headlights; Each

Superb quality reproduction of the original headlamp vacuum canister designed for use on all 1968-69 Camaro models that included concealed headlamps. Each actuator is manufactured to exact factory specifications ensuring a...

Product#: 2786362

1968-69 Charger; Grill Extension Bezel; with Brackets; Silver; Passenger Side

Reproduction of the passenger side 1968-69 Charger grill extension manufactured in a high pressure injection molding process just like the factory Mopar item. Like the original Mopar item, each grill extension features the...

Product#: 3958006

1969 Camaro; RS Inner Headlamp Door; Die-Cast Chrome; RH Passenger Side

Reproduction of the original chrome inner headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each chrome headlight door is manufactured in zinc alloy die-cast metal and chrome plated to a...

Product#: 153930

1958-82 Chevy, Pontiac; Headlamp Mounting Set; Various Quad Headlamp Models; 3 Tab

Reproduction of the original headlamp mounting set designed for use on various Chevrolet and GMC truck models. This set includes four 3-tab stainless headlamp retaining rings, four EDP coated "square-hole" style headlamp...

Product#: R2552

1968 Camaro; Rally Sport Headlight Hose Set; with Color Hoses; Diagram Included

OER® reproduction of the original vacuum hose set designed for use on 1968 RS Camaro models. This reproduction hose kit is designed and manufactured to exact factory specifications including correct size vacuum hoses and...

Product#: 3927444

1968-69 Camaro; Rally Sport Firewall Grommet; EPDM Molded Rubber

Reproduction of the original firewall grommet designed for use with 1968-69 Chevrolet Camaro models equipped with the Rally Sport hidden headlight option. Manufactured from high-quality EPDM rubber, this grommet accurately...

Product#: 2998606

1970 Charger Grill Bracket Set

OER reproduction of the 1970 Dodge Charger grill "L" brackets. Manufactured in stamped stamped steel just like the original factory Mopar part. Each bracket features 2 square retainer nuts spot welded in place and includes 2...

Product#: 2998884

1970 Charger Headlamp Door Crank Rod - with Hidden Headlamps

OER reproduction of the original 1970 Dodge Charger headlamp crank rod for use on models that included factory concealed headlamps. Includes a 2" slotted rod that acts as a pivot for the headlamp door. Manufactured in stamped...

Product#: MB1919

1970 Charger; Headlamp Door Hardware Set; 12 Piece; For Hidden Headlamps

OER reproduction of the 12-piece headlamp door hardware set for 1970 Dodge Charger. Set includes the (2) headlamp door stop adjusting screws, (2) small plastic bushings, and (2) large plastic bushings for headlamp door pivot...

Product#: 3914748

1967-68 Camaro; Rally Sport Headlight Backing Plate; RH Passenger Side

Reproduction of the original rear headlamp backing plate designed for use on 1967-68 Camaros with the RS (hidden headlamp) option. This backing plate acts as a support for the outer headlamp door and molding. This backing...

Product#: 2785824

1970-71 Charger Headlamp Door Bumpers with Concealed Headlamps Set of 4

OER reproduction of the 1970-71 Dodge Charger headlamp door bumpers for models with concealed headlamps. Manufactured in rubber just like the factory Mopar item. Sold as a set of four. One set required per car. Note: Coming...

Product#: 1300540

1968-69 RS Headlamp Retracting Cover Shaft Washer - Each

Reproduction of the original retracting cover shft washer unit designed for use with 1968-69 headlamp assemblies. This washer is designed to replace the existing unit for any 1969-69 Camaro RS model when rebuilding the...

Product#: MN3105

1973-74 Dart Headlamp Bezel Retainer Set ; 4 piece

This OER® reproduction grill nut/headlamp bezel retainer set is designed to replicate the grill nut that secures the headlamp bezel to the grill. Each set includes 4 of the correct nylon nuts that are required to complete...