Product#: 3998633

1967-69 Camaro, Firebird, 1967-72 Nova; Carburetor to Accelerator Cable; 6 Cylinder; OER

Reproduction accelerator cable for 1967 Camaro, Firebird (6 and 8 cyl), 1968-69 Camaro, Firebird (6 cyl), 1968-72 Nova (6 cyl) models. A faulty cable can lead to problems associated with acceleration and become a safety...

Product#: 336969

1970-73 Camaro, 1970-72 Chevelle; Accelerator Cable; Carburetor to Accelerator Lever; 4 Barrel; Fits;

Reproduction carburetor to accelerator lever cable for 1970 Camaro (4 bbl), 1971-73 Camaro with (350 4 bbl.), and 1970-72 Chevelle (with 396, 454). Each cable is manufactured to correct length and specifications. Replaces...

Product#: P15211

1959-66 Pontiac; Tri-Power Throttle Body; For 389/421 Engine

Reproduction Tri-Power throttle body assembly for 1959-66 Pontiac models with a 389 or 421 engine. This throttle body is manufactured out of Die Cast and features the carburetor shaft as well as the butterflies. The front and...

Product#: 9792222

1968-69 Firebird; Accelerator Control Cable; with 2 bbl. Carburetor; OER

Reproduction of the original accelerator cable designed for use with 1968-69 Firebird models with 1 or 2 bbl carburetors. Faulty cables can lead to problems associated with acceleration and become a safety hazard. After years...

Product#: 496796

1974-75 Various Pontiac Models Firebird, Catalina; Choke Heater Tube Kit

Reproduction choke tube kit for 1974-75 Pontiac models such as Firebird and Catalina. This kit is an exact copy of the OEM and contains the tubes and the rubber hose connection. For use with 4BBL Carburetors on 350, 400 or...

Product#: 14394

1968-69 Firebird; Accelerator Cable; with Quadrajet

Reproduction accelerator cable for 1968-69 Firebird models with 4 bbl carburetor. Each cable is manufactured to correct factory specifications replacing the old or frayed original cable exactly. {fitment}

Product#: 15122

1977 Pontiac Firebird, Trans Am with 403 Motor, 1975-77 Impala, Full Size; Accelerator Throttle Cable

Exact reproduction throttle cable for 1975-77 Impala, Full Size and 1977 Firebird Trans Am models with a 403 motor. Features the eyelet style end on the cable at the carburetor and mounts to the throttle cable bracket with...

Product#: 14673

1968-72 Camaro, Impala, Nova; Holley Throttle Cable Bracket

Reproduction of the original style Holley throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...

Product#: CB1535G

1968-71 Pontiac GTO/LeMans/Tempest; Accelerator/Throttle Cable

Reproduction accelerator cable for 1968-71 Pontiac Tempe4st, Lemans, and GTO models. Each cable is manufactured to correct factory specifications replacing the old or frayed original cable exactly. Cable measures 22-3/4" from...

Product#: CB12278N

1970-72 Chevrolet Nova; Accelerator; Throttle; Cable

Replacement accelerator cable for 1970-72 Chevorlet Nova models with Holley or Quadrajet 4BBL carburetor. Extends from the carburetor to the accelerator pedal lever. Sold individually. GM# 3998632. {specs} {fitment}

Product#: C891741

1967 Firebird; Carburetor Lever Extension Bracket; with 400 and 4 bbl Carburetor

Reproduction 1967 Pontiac Firebird throttle lever arm, also known as the carburetor lever extension. This is the throttle arm bracket that is used only on 1967 Firebird V8 equipped models with 4 barrel Quadrajet carburetor....

Product#: CB21725Z

1970-71 Corvette, Camaro, Chevelle, Nova, C10, Blazer, Carburetor Heat Shield; Models with a QuadraJet Carburetor

Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...

Product#: 14048

1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"

Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...

Product#: F1443

1969 Pontiac Firebird, Trans-Am; Lower Carburetor Pan; for Ram Air IV, 400 Engine

Reproduction of the factory Ram Air pan that was used on all Ram Air IV motors. This pan is needed for 1969 Trans-Am or Firebird 400 models. The difference between Ram Air III and Ram Air IV is the RAIV has two provisions for...

Product#: 3969835

1965-74 Holley; Carburetor Heat Shield; 4 Barrel with 396,454 Engine

OER® reproduction carburetor heat shield for all GM models with a Holley 4 bbl carburetor. This heat shield will help cool the intake charge for better performance. Original for 1970 396ci & 454ci with Special...

Product#: TP3549G

1964-66 Various Pontiac Models Including GTO, Tempest, Grand Prix; Tri-Power; Carburetor Top Plate; Air Horn

New reproduction Tri-Power carb top plate air horn 1964-66 GTO, LeMans, Tempest, Grand Prix and Bonneville with Tri-Power 389 engine. Finding these Tri-Power carburetor parts can be very hard to find. We now have the upper...

Product#: TP3550G

1961-66 Various Pontiac Models Including LeMans, Tempest, GTO; Tri-Power; Carburetor Base Plate; Throttle Plate

This is a new base plate assembly for all 1961-66 Tri-Power end carburetors for Pontiac GTO, LeMans, Tempest, Grand Prix and Bonneville. Also works on 1966 Oldsmobile Cutlass Tri-Power with 400 engine and Pontiac models with...

Product#: 1248086

1975-81 Camaro, Firebird; Accelerator Cable; 267, 305U, 305, 350L

Factory service replacement accelerator cable for use with 1975-81 Camaro models with 267, 305, 350 V8 engines, and 1976-80 Firebird models with 305U, 350L, 1980 267, 350H NM6 Canadian emissions (export). This cable extends...

Product#: A8700127

1968-71 Firebird, Trans Am; Quadrajet Throttle Shaft and Choke Set; 3 Piece Set

Reproduction of the original quadrajet throttle shaft and choke set designed for use with various 1968-71 Pontiac models including Firebird and Trans Am models. This show quality set contains the key components to repair or...

Product#: CB10886G

1966-67 Pontiac GTO; 4BBL; Tri-Power; Accelerator/Throttle Cable

Reproduction accelerator cable for use on 1966 GTO models with Tri-Power and 1966-67 with 4BBL carburetor. This cable has 3 adjustment holes for optimal adjustment. Fits applications with automatic or manual transmission....

Product#: 1256633

1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit

Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...

Product#: K7969

1970-71 Firebird, Trans Am; Throttle Cable Bracket; Ram Air 400 or HO 455 with Turbo 400, Man Trans

Reproduction of the original die stamped throttle cable bracket designed for use with 1970-71 Firebird and Trans Am models with Ram Air 400 or HO 455 with Turbo 400 or manual transmission. Each bracket is manufactured in...

Product#: CB10510S

1968-71 Buick Skylark models; Throttle/Accelerator; Cable

Reproduction accelerator/throttle cable for 1968-71 Buick Skylark. Fits Skylark with 4bbl carburetor. Attaches using ball stud and a bracket on the carburetor. Sold individually. 21-3/4" long. {specs} {fitment}

Product#: 27950

1967-72 Buick Skylark, LeSabre, Electra; Carburetor Dash Pot Mounting Bracket; On Intake Manifold

Replacement dash pot mounting bracket for various 1967-72 Buick models including Skylark, LeSabre, Electra, Wildcat models. This bracket mounts on the intake manifold and the dash pot threads into it. Sold individually...

Product#: CB1459F

1969 Pontiac Firebird; Accelerator Cable; Carburetor Lever/Bracket

Reproduction throttle cable arm 8 cylinder engine carburetor lever extension bracket for Pontiac Firebird with 350, 400 and 455 engines. This bracket mounts on the carburetor and the accelerator attaches to it.  Sold...

Product#: CB1008T

1970-1972 Oldsmobile Cutlass 442, F85; Choke; Tube

1970-1972 Oldsmobile Cutlass, 442, F85, Cutlass Supreme choke pipe with 455 with 4 bbl carburetor. This tube has a double twist that was only used on the assemble line cars. {specs} {fitment}

Product#: 14305

Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors

Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...

Product#: CB1533G

1967-77 Pontiac Firebird, 1967-73 GTO; Dust Boot; Accelerator Pump; Quadrajet Ram Air

Reproduction of the accelerator pump dust boot for 1967-77 Firebird and 1967-73 GTO with a Quadrajet Ram Air setup. The accelerator mounts inside the carburator and is operated by a lever. This boot keeps dust and other...

Product#: F12340

1969 Firebird, Trans Am; Lower Foam Pan Seal; with Ram Air III

Correct reproduction of the original foam seal designed for use with 1969 Firebird and Trans Am models with Ram Air III. Manufactured to correct factory dimensions and replaces the old or worn out original exactly. This is...

Product#: K7970

1970-73 Trans Am; Ram Air Throttle Switch Assembly

Reproduction of the original throttle switch assembly designed for use with 1970-73 Pontiac Trans Am models. This assembly features all the components necessary to replace the original throttle switch assembly that mounts on...

Product#: MN2228

1970-74 Dodge, Plymouth; B &E-Body; Accelerator Throttle Cable; with 400, 426, 440; 20"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth B and E body big block (400, 426, 440) models as listed. Each cable is manufactured to correct factory specifications...

Product#: MN2229

1970-74 Challenger, Barracuda, Cuda; Accelerator Throttle Cable; 318, 340, 360; 22-1/2"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body small block (318, 340, 360) models as listed. Each cable is manufactured to correct factory specifications...

Product#: MN2231

1967-74 Dodge, Plymouth A-Body; Accelerator Throttle Cable; 383, 440; 18"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth A body models with 383, 440 engines. Each cable is manufactured to correct factory specifications replicating the original...

Product#: F12348

1969 Pontiac Firebird; Ram Air; Upper Hood Pan Foam Seal; For Formula 400 Hood Only

Correct reproduction of the original style seal used for 1969 Pontiac Firebird models with Ram Air and Formula 400 hood. Each seal is manufactured in dense foam to factory dimensions for an authentic replacement and fit....

Product#: HC89

1968 Carburetor Return Spring

Reproduction of the original carburetor return spring for 1968 GM cars with Special/HIPO big block engines. Manufactured in the correct green color. Applications: 1968 Camaro Z28 with 302 or 396 1968 Chevelle SS with 396 exc....

Product#: F12339

1967-68 Firebird; Lower Foam Pan Seal; with Ram Air

Correct reproduction of the original lower foam Ram Air pan seal designed for use with 1967-68 Pontiac Firebird models with Ram Air. This seal glues to the lower Ram Air pan. {fitment}

Product#: C459742

1969 Pontiac Firebird, Trans-Am; Ram Air to Pan Hold Down Stud Set

Reproduction of the original 1969 Firebird 400 and Trans Am Ram Air pan to carburetor stud set. This pair of studs is used to attach the lower Ram Air pan to the carburetor. {fitment}

Product#: F12358

1968-74 Firebird, Trans Am; Aluminum Rear Carburetor Fitting; with Angled Fitting

Reproduction of the original carburetor rear fitting designed specifically for use with 1968-74 Pontiac Firebird and Trans Am models with 326, 350, 400, and 455 motors with or without Ram Air. This fitting screws to the back...

Product#: 403929

1968-79 Accelerator Control Cable Retainer ; Various Models

OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...

Product#: MN2225

1968-70 Charger, Coronet, GTX, Satellite, Road Runner; Throttle Cable; with Hemi; 19-3/4"; OER

Reproduction of the original throttle cable designed for use with 1968-70 Dodge Charger, Coronet, Super Bee, and Dodge, Plymouth B-Body Hemi models. Connect the accelerator linkage to the carburetor with this original style...

Product#: MN2227

1968-72 Dodge, Plymouth A-Body Throttle Cable; 19-7/8"; with 273, 318, 340

Reproduction of the original throttle cable designed for use on 1968-72 Dodge and Plymouth A Body models as listed. This reproduction throttle cable is designed for use with 273/318/340 engines. Connects the accelerator...

Product#: MN2230

1970-74 Challenger, Barracuda, Cuda; Accelerator Throttle Cable; with Hemi; 17-1/2"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body Hemi models. Each cable is manufactured to correct factory specifications replicating the original in design and...

Product#: K7971

1968-69 Firebird, Trans Am; Throttle Cable Bracket; 4 bbl.; TH400 or Manual Trans

Reproduction of the original die stamped throttle cable bracket designed for use with 1968-69 Firebird and Trans Am models with 4 bbl. carb, TH400, or manual transmission. Each bracket is manufactured in die-stamped metal to...

Product#: 14672

1968-72 Camaro, Impala, Nova; Quadrajet Throttle Cable Bracket

Reproduction of the original style Quadrajet throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...

Product#: F12372

1972-74 Firebird, Trans Am; Aluminum Carburetor Fitting; with 2 Angled Fittings

Reproduction of the original aluminum carburetor fitting designed for use with 1968-75 Pontiac models including Firebird and Trans Am. Each fitting features the correct GM part number # 487331 stamped on the part for...

Product#: F12371

1968-75 Firebird, Trans Am; Carburetor Rear Fitting; with Straight Fitting

Reproduction of the original aluminum carburetor fitting designed for use with 1968-75 Pontiac models including Firebird and Trans Am. This particular fitting was used on most all 1968-69 Firebird models, but can also be used...

Product#: 342407

1974-78 Buick, Chevrolet, Oldsmobile, Pontiac; Cruise Control Cable Bracket

Cruise control cable bracket on carburetor, replaces GM # 342407. This bracket bolts it to accelerator cable bracket. It allows you to put 2 cables together when adding cruise control. This bracket is for cruise control cable...

Product#: F12338

1967-68 Pontiac Firebird; Upper Hood Pan Foam Seal

Correct reproduction rubber seal which seals the Ram Air upper hood pan to the under side of the hood for 1967-68 models with Ram Air. This seal sandwiches between the hood and the Ram Air pan. {fitment}

Product#: K0135

1968-80 Chevrolet, Pontiac; Accelerator Return Spring

This is a correct reproduction of the commonly missing or worn out accelerator return spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Chevrolet Applications:...