Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...

Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: 368077

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Tension Spring; Various Car and Truck Models

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

Product#: K517

1967 Camaro; Accelerator Pedal Assembly; V8; 327ci, 350ci, 396ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Camaro models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: K520

1969 Camaro; Accelerator Pedal Pad Assembly; V8; with Cowl Induction

This is the complete accelerator pedal assembly which extends from the firewall on all V8-equipped vehicles with cowl induction. This assembly comes complete with the accelerator pedal, pedal mount pin and spring, accelerator...

Product#: K518

1967 Firebird; Accelerator Pedal Assembly; V8; 326ci, 400ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: TF100418

1955-57 Chevy Bel Air, Corvette, 150, 210, Nomad; Accelerator Pedal Pad

Correct reproduction accelerator pedal for 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each pad is manufactured to correct factory specifications replicating the original in design and fitment. Features correct...

Product#: 3923551

1968-69 Camaro Z28 Carb to Accelerator Lever Rod; 302 4 bbl

Reproduction accelerator pedal rod for 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...

Product#: PY4206

1971-74 Trans-Am Throttle Cables

These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.

Product#: PY4216

1970 Firebird, Trans Am; Accelerator Lever Cable; 350, 400, 455 HO, or Ram Air

Reproduction accelerator lever cable for 1970 Firebird and Trans Am models with 350, 400, 455 HO or Ram Air. This cable extend from the accelerator to the throttle arm. If your original cable shows signs of fraying or...

Product#: 3959113

1969 Chevrolet Camaro; Accelerator Throttle Arm; V8; with Cowl Induction Hood

Reproduction of the original accelerator throttle arm designed for use with 1969 Chevrolet Camaro models that included a cowl induction hood. This is a correct reproduction of the original GM throttle lever arm. Manufactured...

Product#: CB1539G

1967-71 Pontiac GTO, LeMans, Tempest; Accelerator; Throttle; Cable; GM#9792069

Reproduction accelerator/throttle cable bracket that is exactly like OEM. It features the correct OEM number stamped 9792069 unlike what was previously on the market. Fits 1967-71 GTO, LeMans and Tempest with 350ci, 400ci,...

Product#: 9779969

1965-66 Various Pontiac Models Including GTO, LeMans, Tempest; Tri-Power; Throttle/Accelerator Cable; Mounting Bracket

Reproduction Tri-Power accelerator/throttle cable mounting bracket is a perfect fit for 1965-66 GTO, LeMans, Tempest, Grand Prix and Bonneville with Tri-Power 389 engine. 4 piece kit. See vehicle fitment for complete...

Product#: 3923503

1968-69 Camaro, Nova; Accelerator Throttle Arm V8; 307ci, 350ci, 396ci; w/o Cowl Induction

Reproduction of the original throttle arm designed for use on 1968-69 Camaro and Nova models. Each throttle arm is produced to replicate the original in quality and fit. Replace your worn out or damaged original throttle arm...

Product#: CB5379F

1967 Firebird; Quadrajet Throttle Arm; For V8

Reproduction 1967 Pontiac Firebird throttle lever arm, also known as the carburetor lever extension. This is the throttle arm bracket that is used only on 1967 Firebird V8 equipped models with 4 barrel Quadrajet carburetor....

Product#: 9789015

1967 Pontiac Firebird; Accelerator Pedal Rod ; with V8

Reproduction of the original accelerator pedal rod designed for use on 1967 Firebird models with V8 engines. The pedal rod is the final link in your Firebird models accelerator/throttle activation system. This special rod...

Product#: 3577527

1971-72 Mopar Accelerator Pedal Pad ; A,B,C,E-Body

Reproduction of the original accelerator pedal pad designed for use on various Chrysler, Dodge and Plymouth A, B, C, and E-body models. This injection molded ABS pedal pad is an accurate reproduction of the original pad...

Product#: 9789018

1967 Firebird; Accelerator Pad To Rod Support; OE Style Steel Reproduction

Reproduction of the original accelerator pad to rod support designed for use on 1967 Firebird models. This is the support that bolts to the firewall and holds the accelerator pedal shaft. This item will replace your often...

Product#: IN1211Z

1968-72 Pontiac GTO, Grand Prix, LeMans; Accelerator/Gas Pedal; Rubber OEM

Reproduction accelerator pedal for 1968-72 Pontiac GTO, Grand Prix and LeMans vehicles. Each accelerator pedal is manufactured in rubber like the rubber pedals that replicates the original in fit and design. It features the...

Product#: 27948

1967-73 Skylark, Riviera, Regal; Accelerator Return Spring; Bracket

This is the factor throttle/accelerator return spring bracket that attaches to the intake and hold returns spring. For various Buick models including Electra, Skylark, Regal, LeSabre. Sold individually. See vehicle fitment...

Product#: 340637

1974-81 Outer Accelerator Pull Spring

Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...

Product#: K912

1967-2004 Buick, Chevy, Pontiac, Olds; Accelerator Pedal Pad Trim Plate; Stainless Steel; Various Models

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....

Product#: MB327

1966-70 Charger, Coronet, Belvedere, GTX, Superbird; Accelerator Pedal Pad; Floor Mounted; with Steel Core

Reproduction of the original accelerator pedal pad designed for use on 1966-70 Belvedere, Charger, Road Runner, Satellite and Superbird B-Body models. This quality reproduction is manufactured in hard rubber material...

Product#: K519

1968-69 Camaro, 1968-74 Nova, Omega, Ventura; Accelerator Pedal Assembly; V8; 307ci, 327ci, 350ci, 396ci, 402ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: 3923539

1968-69 327, 350 Carb to Accelerator Lever Rod; Small Block with 4 bbl Carb

Reproduction 1968-69 accelerator pedal rod for 327 or 350 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...

Product#: 3909978

1967 Chevy, Pontiac; Accelerator Pad; with Steel Backing Plate; OE Style; Various Models

Reproduction of the original accelerator pedal pad designed for use on various 1967 GM models. This accelerator pedal pad is manufactured in the correct design based on a steel backing unlike the GM plastic replacements. The...

Product#: MD2169

1962-65 Dodge,Plymouth A, B-Body; Accelerator Pad, Floor Mounted

Reproduction of the original accelerator pedal pad designed for use on 1962-65 Dodge and Plymouth models. This quality reproduction is manufactured with an OEM style embedded steel core offering an authentic appearance and...

Product#: 14318

1968-69 Camaro; Crossram Throttle Rod; Accelerator Pedal Rod

Reproduction crossram throttle rod or accelerator pedal rod for 1968-69 Camaro models equipped with the optional Crossram induction system. This unique linkage rod mounts to the accelerator pedal at the firewall and attaches...

Product#: ME1614

1973-74 Dodge, Plymouth; Accelerator Pedal Pad with Bezel and Hardware; Various Models

Reproduction of the original accelerator pedal pad, chrome trim and mnounting hardware designed for use on 1973 Mopar B,C, and E-Body models. Manufactured exactly as original including the correct grain texture for an...

Product#: 3909980

1967-69 Camaro, 1970 Nova; Accelerator Pedal Rod; V8

Reproduction of the original accelerator pedal pad rod designed for use on 1967 Camaro (6 & 8 cylinder), 1968-69 Camaro (8 cylinder), and 1970 Chevy II Nova models. This rod connects between the throttle arm and the...

Product#: IN3091G

1964-65 Pontiac GTO, LeMans; Accelerator Pedal; OER Rubber

This pedal is a reproduction of the OEM 1964-65 Pontiac GTO and LeMans. Sold individually. This is a factory style rubber gas/accelerator pedal and is 100% correct. {specs} {fitment}

Product#: MD2144

1971-72 Dodge, Plymouth; Accelerator Pedal Pad and Bezel Kit ; Various Models

Reproduction of the original accelerator pad, bezel and hardware designed for use on Dodge and Plymouth A, B and E-body models. This injection molded ABS accelerator pedal pad set includes the pedal pad, stainless steel...

Product#: 9789456

1967 Firebird; Accelerator Throttle Arm; V8; 326ci, 400ci

Correct reproduction of the original accelerator throttle arm designed for use on 1967 Pontiac Firebird V8 models. Manufactured in stamped steel to OE specifications, each throttle arm features correct contours that provide...

Product#: IN2222G

1966-67 Pontiac GTO, LeMans; Gas Pedal; OEM Rubber

Reproduction OEM rubber accelerator pedal. This is a factory rubber accelerator pedal reproduced like the OEM for 1966-67 Pontiac GTO and LeMans. Most of the ones on the market are plastic. This reproduction is 100% correct....

Product#: MD1620

1971-74 Mopar Accelerator Pedal Pad Bezel ; Various Models ; Stainless Steel

Reproduction of the original accelerator pedal bezel designed for use on various 1971-72 Reproduction of the original accelerator pad bezel designed for use on Mopar A,B,C-Body and E-Body models. Each accelerator pedal bezel...

Product#: GN110242

1978-88 Buick, Chevrolet Pontiac, Olds; Accelerator Pedal Pad; Various Models

Reproduction of the original accelerator pedal designed for use on various 1978-87 GM G-Body models. Manufactured in injection molded ABS to factory specifications replicating the original in quality and appearance. Will fit...

Product#: 368078

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Mounting Pin; Various Car & Truck Models

This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...

Product#: 3798256

1955-69 GM; Accelerator Pedal Firewall Bushings; 1/2" Long, 5/16" I.D.; Pair

Reproduction accelerator firewall bushings for various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive play in the gas pedal pad while...

Product#: 3864742

1964-71 Chevrolet, GMC; Floor Mounted Accelerator Pedal Pad Trim Plate; Various Car & Truck Models

Correct reproduction accelerator pedal pad stainless trim plate for various 1965-71 GM vehicles. Each trim plate is manufactured in stamped stainless offering long lasting dependability and an authentic appearance. {fitment}...

Product#: MN2228

1970-74 Dodge, Plymouth; B &E-Body; Accelerator Throttle Cable; with 400, 426, 440; 20"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth B and E body big block (400, 426, 440) models as listed. Each cable is manufactured to correct factory specifications...

Product#: MN2229

1970-74 Challenger, Barracuda, Cuda; Accelerator Throttle Cable; 318, 340, 360; 22-1/2"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body small block (318, 340, 360) models as listed. Each cable is manufactured to correct factory specifications...

Product#: MN2231

1967-74 Dodge, Plymouth A-Body; Accelerator Throttle Cable; 383, 440; 18"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth A body models with 383, 440 engines. Each cable is manufactured to correct factory specifications replicating the original...

Product#: HC89

1968 Carburetor Return Spring

Reproduction of the original carburetor return spring for 1968 GM cars with Special/HIPO big block engines. Manufactured in the correct green color. Applications: 1968 Camaro Z28 with 302 or 396 1968 Chevelle SS with 396 exc....

Product#: *R1011

1969 Firebird; Pedal Pad Kit; with Stainless Trim; Auto Trans; 6 Piece Set

Reproduction of the original pedal pads with trim designed for 1969 Firebird models. This pedal pad and trim set is designed to replace the worn out original pads for 1969 Firebird models with automatic transmissions....

Product#: *R5002

1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...

Product#: 3912540

1967 Camaro; Accelerator Throttle Arm; V8 Small Block; 302ci, 327ci, 350ci

Correct reproduction of original style GM throttle lever arm designed for use on 1967 Camaro V-8 small block 302ci, 327ci, 350ci models. Each throttle arm is designed and remanufactured to replicate the original in appearance...

Product#: 3864740

1964-71 Chevrolet; Floor Mounted Accelerator Pedal Pad; Rubber; with Steel Insert; OEM Reproduction

Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Each accelerator pedal pad is manufactured in quality hard EPDM rubber unlike the plastic service replacement...

Product#: 3863501

1968-74 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Pad to Rod Support

Reproduction of the original style GM accelerator pedal rod support for use on the various Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each support is manufactured in injection molded ABS offering an exact...

Product#: 4868300

1958-71 GM; Accelerator Pedal Ball Stud Pivot; 1/4"-20 x 1-1/2"; Each; Various Models

Reproduction factory ball stud pivot for various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing the gas pedal...

Product#: 403929

1968-79 Accelerator Control Cable Retainer ; Various Models

OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...

Product#: 3923549

1968-69 396 Carb to Accelerator Lever Rod ; Big Block with 4 bbl Carb

Reproduction of the original 1968-69 accelerator pedal rod designed for use with 396 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is...

Product#: MN2225

1968-70 Charger, Coronet, GTX, Satellite, Road Runner; Throttle Cable; with Hemi; 19-3/4"; OER

Reproduction of the original throttle cable designed for use with 1968-70 Dodge Charger, Coronet, Super Bee, and Dodge, Plymouth B-Body Hemi models. Connect the accelerator linkage to the carburetor with this original style...

Product#: MN2227

1968-72 Dodge, Plymouth A-Body Throttle Cable; 19-7/8"; with 273, 318, 340

Reproduction of the original throttle cable designed for use on 1968-72 Dodge and Plymouth A Body models as listed. This reproduction throttle cable is designed for use with 273/318/340 engines. Connects the accelerator...

Product#: MN2230

1970-74 Challenger, Barracuda, Cuda; Accelerator Throttle Cable; with Hemi; 17-1/2"; OER

Reproduction of the original accelerator throttle cable designed for use on 1970-74 Dodge and Plymouth E body Hemi models. Each cable is manufactured to correct factory specifications replicating the original in design and...

Product#: 3924409

1964-69 Chevrolet; Accelerator Pedal Pad to Rod Support; OE Style; Steel Reproduction; Various Models

Reproduction of the original style stamped steel accelerator pedal pad to rod support unit. This steel reproduction is manufactured to replicate the original in appearance, design and functionality. Includes correct style...

Product#: *R5019

1970-71 Camaro Z28 Pedal Pad Kit ; Drum Brakes, Auto Trans; 6 Piece Set

Reproduction of the original pedal pads and trim plates for use on 1970-71 Camaro Z/28 models. This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z/28 models with drum brakes and automatic...

Product#: *R5016

1970-71 Camaro Z28 with Disc Brakes and Automatic Transmission; 5-Piece Pedal Pad Kit

This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z28 models with disc brakes and an automatic transmission. Kit includes Accelerator pedal pad Disc Brake pedal pad with the "Disc Brakes" chrome...

Product#: *R5005

1967-77 GM Pedal Pad Kit With Disc Brake Emblem; Auto Trans; 6-Piece Kit

Reproduction of the original pedal pads designed for 1967-68 Camaro, Firebird and a variety of additional GM models as listed. This pedal pad set is designed to replace the worn out original pads for models with disc brakes...

Product#: *R5003

1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....

Product#: 14672

1968-72 Camaro, Impala, Nova; Quadrajet Throttle Cable Bracket

Reproduction of the original style Quadrajet throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...