Product#: 3965713

1967-92 Camaro, Firebird; Hood Prop Rod for Fiberglass Hoods; Each; Made in the USA!

Hood prop required when installing a fiberglass hood on your Camaro or Firebird. Since hood springs are not recommended when using fiberglass hoods, this prop is essential for keeping your hood open while working in the...

Product#: K555

1958-77 GM; Hood Adjuster Bolt and Nut Set ; 5/16"-18 x 1-3/8"; Various Models

Reproduction of the original hood stop bolt and nut set designed for use on various 1958-77 GM models. This bolt and nut set will keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct...

Product#: CW5606G

1969-1970 Pontiac GTO, LeMans; Ram Air; Hood Pan; Template

This is a template for marking and the under brace structure to install the upper ram air pan to the hood of a 1969-70 Pontiac GTO. Take the guess work out and do it right with this template. All hoods from the factory where...

Product#: K638

Universal Hood Pin Rubber Gasket; Each

Reproduction hood pin rubber gasket found on models with hood pins. Each gasket is die-cut to the proper dimension. This gasket will also fit a wide variety of aftermarket hood pins. Sold individually. Use as required. Check...

Product#: 3792828

1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models

Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...

Product#: K551

1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models

Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...

Product#: K918

1967-72 Chevy C10, Blazer, Jimmy, Suburban; Hood Bumper Set ; 6 Piece Set

Reproduction of the original style hood bumpers designed for use on 1967-72 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Hood bumpers are manufactured in quality EDPM rubber and feature correct dimensions for...

Product#: 22552599

1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models

Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...

Product#: MD8050

1966-71 Chrysler, Dodge, Plymouth; Hood Insulation Clip; Black Metal 1-3/4" x 1/2"; Each

Reproduction hood insulation clip for various 1966-71 Dodge and Plymouth models. Each clip is manufactured in stamped steel to OE specifications and replicates the original in design and function. Designed with inline prongs...

Product#: K531

1967-69 Camaro, Firebird; Hood Insulation Fastener Set; 20 Piece Set; Various Models

When it comes to restoring your GM classic, the smallest details often make the biggest difference. These reproduction hood insulation fasteners are the perfect finishing touch for your underhood restoration. Correct in every...

Product#: K17

1967-72 Chevy, GMC Pickup, Blazer, Suburban; Hood Side Rubber Stopper Set; 4 Piece

OER® reproduction of the original hood to fender rubber stoppers designed for use on 1967-72 Chevrolet and GMC truck models. These uniquely designed bumpers will replace the originals exactly offering years of service...

Product#: CX1252

1947-55 Chevy, GMC Pickup Truck; Hood Rubber Bumper Set; 10 Piece Set

OER® reproduction of the original truck hood rubber bumpers designed for use on 1947-55 Chevrolet and GMC truck models. Each rubber bumper is manufactured to replicate the original. Replace the old or worn out bumpers with...

Product#: 10017997

1982-92 Pontiac Firebird; Hood Side Bumper; Each

Correct reproduction of the original rubber bumper designed to replace the hood panel side bumpers on all 1982-92 Firebird models. Designed to prevent rattling and helps to keep the hood aligned properly. Sold individually. 4...

Product#: MA9822

1963-66 Dodge/Plymouth A-Body; Hood Side Rubber Bumper; Each

OER reproduction of the original hood side rubber bumper designed for various 1963-66 Mopar A-Body models. Each rubber stopper is designed to factory specifications to correctly replace the hood side stop bumper. Sold...

Product#: 337477

1974-81 Camaro; Hood Latch Bracket; RH Passenger Side

Reproduction of the hood lock latch support for 1974-81 Camaro models. This stamped steel piece supports the hood latch from the passenger side on all 1974-81 models. Features a black electrophoretically deposited coating...

Product#: 14006369

1978-81 Camaro; Hood Latch Bracket; LH; Driver Side

Reproduction hood lock latch support for 1978-81 Camaro models. This stamped steel bracket supports the hood latch from the driver side on all 1978-81 models. Includes threaded nut inserts for installation. Features a black...

Product#: ME512

1970-74; Challenger Hood Front Rubber Bumper; Each

Correct reproduction of the original front hood rubber bumper designed for use on 1970-74 Challenger models. Each bumper is designed to replace the original exactly. Manufactured from quality EPDM rubber material for long...

Product#: *R81915

1982-92 Camaro; Rubber Hood Stopper Set; 4 Piece Set

Correctly configured reproduction of the original hood side rubber bumpers designed for use on 1982-92 Camaro models. Hood side bumpers can wear out causing the hood to make contact with the body. Be sure your hood stoppers...

Product#: 12337985

1973-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Side Rubber Bumper; Each

OER® reproduction of the original hood side bumper designed to keep the hood aligned on 1973-91 Chevrolet and GMC models including Blazer, Jimmy and Suburban. This bumper is manufactured from extruded rubber and fit on...

Product#: CX1253

1955-57 Chevrolet, GMC Pickup; Hood Rubber Bumper Set; 10 Piece Set

OER® reproduction of the original truck hood rubber bumpers designed for use on 1955-1957 Chevrolet and GMC truck models. Each rubber bumper is manufactured to replicate the original. Replace the old or worn out bumpers...

Product#: 10277069

1998-02 Camaro, Firebird, 2003-13 Impala; Hood Adjust Bumper, Front Center, Each; OER

Correct replacement of the original hood adjuster and bumper designed for use on 1998-2002 Camaro and Firbeird models. This hood adjust bumper will install on the front center bumpers that go on the facia center support. Each...

Product#: FL110

1967-72 Pontiac Firebird, Tempest, Lemans, GS; Hood Tachometer Anti-Fog Vent Line Set

Reproduction hood tachometer vent line set for 1967-72 Pontiac models including 1967-69 Firebird and Trans Am. In 1968 Pontiac had a problem with their hood tachometer fogging up, so in 1970 they came out with this special...

Product#: 748621

1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set

Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...

Product#: K900

1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each

Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...

Product#: 6274330

1973-74 Chevrolet Nova; Hood Latch Assembly

Reproduction of the original hood latch assembly for 1973-74 Chevrolet Nova models. Each hood latch is manufactured using high grade steel and produced to exact factory specifications. Replaces the worn out or damaged factory...

Product#: 3781200

1961-62 Impala, Bel Air, Biscayne; Hood to Cowl Seal, Weatherstrip Seal

Quality reproduction of the original hood to cowl weatherstrip seal that attaches to the cowl panel and seals the area between the hood and windshield. This correctly configured seal is manufactured to exact specifications...

Product#: K9196

1991-96 Impala, Caprice, GM Full Size; Rear Hood Cowl Outer Seals, Pair

Reproduction of the original rear hood outer corner rubber seals designed for use on 1991-96 Chevrolet Impala, Caprice and GM full size models. Each side seal is manufactured from durable EPDM rubber matching the original...

Product#: 3962891

1968-96 Impala, Chevelle, Corvette; Hood Rear Panel Bumper, Each, Various Models

Reproduction of the original rear hood panel bumper designed for use on various 1968-96 GM models. Exact reproduction of the original rear hood bumper used to replace the worn out or missing original. Manufactured to exact...

Product#: 3984072

1970-81 ChevyCamaro; Rear Hood Rubber Stopper; Each

Correct reproduction rubber bumper for 1970-81 Camaro models. This bumper is manufactured in quality EPDM rubber replicating the original in quality and design. Fits on the rear outer section. The hood rests on the bumper...

Product#: 3891682

1967-81 Camaro; Hood Latch Assembly; Black; Pre-Assembled

OER® reproduction of the original style hood safety latch assembly designed for use on 1967-81 Chevrolet Camaro models. Each assembly is manufactured in stamped steel replicating the original design. This reproduction...

Product#: MB359

1968-69 Charger Hood Mounted Turn Signal Lens ; Pair

Reproduction of the original hood mounted turn signal indicator lens designed for use on 1968-69 Charger models. Repair the hood mounted turn signal indicator lamp system with this factory-style replacement amber indicator...

Product#: 14016593

1974-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Latch Pop-Up Spring

This is a correct hood latch pop-up spring designed for use with Chevrolet and GMC truck models. Each spring is manufactured to factory specifications featuring the correct tension ratio. Replaces OEM part number 14016593....