Product#: 3918764

1967 Camaro SS, 1968-72 Nova SS; Hood Louvers; with Hardware; RH & LH; Pair; "Show Quality"

Reproduction hood louvers for 1967 Camaro SS and 1968-72 Nova SS models. Each hood louver is manufactured in quality die-cast zinc replicating the original design, appearance, and fitment. Features correct black paint scheme,...

Product#: 1662007

1968-69 Camaro SS; Hood Louver Ornament Set; with Hardware; Pair; "Show Quality"

Reproduction of the original die-cast hood louvers designed for use with all 1968-69 Camaro Super Sport models equipped with a 350 or 396 engine. Manufactured with OER® exclusive tooling to exact factory specifications....

Product#: 3907626

1970-81 Camaro, Firebird, 67, 69 Impala, Caprice, Hood Hinge Spring; Each; Various Models

Reproduction of the original hood hinge spring designed for use on various GM vehicles. Each spring is manufactured to replicate the original in quality and design. Will fit and install as original and features OE tension...

Product#: F12333

1969 Pontiac Firebird; 400 Ram Air Flapper Door Assembly

Reproduction of the Ram Air flapper door assembly for use on 1969 models with a 400 Ram Air hood. This assembly is functional and will allow air to pass through your hood. The 400 Ram Air flapper door assembly operates with...

Product#: MM1143

1970-74; Challenger, Barracuda, Cuda; Hood Hinges; with Springs; Pair

Reproduction of the original All Years All Makes All Models hood hinges designed for 1970-74 Mopar E-body models. Each hood hinge is manufactured to exact factory specifications and includes OE style hood hinge springs. Get...

Product#: *K9151

1968-72 Chevy Nova SS; Hood Louver Kit; with Bezel, Gaskets, Hardware

OER® reproduction hood louvers for 1968-72 Nova Super Sport models. Each cast hood louver is finished in black with bright chrome accents for an authentic appearance. Includes all necessary mounting hardware and chrome...

Product#: 3927442

1968-72 Nova Super Sport; Hood Louver Bezel; Die-Cast Chrome; Each

Quality reproduction hood louver bezels for 1968-72 Chevrolet Nova SS models. Each bezel is manufactured to original factory specifications in quality die-cast zinc featuring a bright chrome finish and correct mounting tabs...

Product#: BP10123S

1969 Buick Skylark, GS; Hood Hinge Set; LH and RH; Pair

Reproduction hood hinge set for 1969 Buick Skylark models. Original hood hinges will bend or become damaged over time, and an unreliable hood hinge is the last thing you want on your classic Buick. Replacing the hinges is...

Product#: CW1810G

1969-70 Pontiac GTO; Ram Air; Flapper Door

Injection molded high quality part that includes the flapper housing, metal door bushing and tabs. Fits 1969 and 1970 GTO Ram Air III / Ram Air IV or standard motor if upgrading to Ram Air on the vehicle. Bolts up to factory...

Product#: K892980

1967-69 Firebird 400; Hood Inserts; Closed Vent Style; Pair

Reproduction hood insert set for 1967-69 Firebird 400 models. These inserts are manufactured in die-cast metal and can be mounted directly into any original GM or reproduction 1967-69 Firebird 400 hood. Hardware available...

Product#: 330459

1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Spring; Each; Made in the USA!

Correct reproduction of the original hood hinge spring designed for use on 1973-80 Chevrolet and GMC truck models. Each spring is manufactured to OE specifications and features the correct tension ratio, offering the highest...

Product#: 14064293

1982-92 Camaro, Firebird; Hood Hinge Assembly; with Stud ; LH Driver Side

Reproduction hood hinge for 1982-92 Camaro and Firebird models. Replace the original bent hood hinge with this high-quality reproduction that replicates the original in both design and function. Original hood hinges often...

Product#: 14064294

1982-92 Camaro, Firebird; Hood Hinge Assembly; with Stud ; RH Passenger Side

Reproduction hood hinge for 1982-92 Camaro and Firebird models. Replace the original bent hood hinge with this high-quality reproduction that replicates the original in both design and function. Original hood hinges often...

Product#: 153104

1962 Chevy II, Nova; Hood Hinge Springs; Polished Stainless Steel; RH & LH; Pair

Add a custom touch to your hood hinges with these brightly polished stainless steel hinge springs for 1962 Chevy II Nova models. Each spring is designed to fit and function like the original unit while enhancing your...

Product#: K892979

1969 Pontiac Trans Am; Hood Scoop Inserts; Fiberglass; RH & LH; Pair

Reproduction hood scoop inserts for 1969 Pontiac Trans Am models. Manufactured from fiberglass, these inserts fit into the two slots at the front of the Trans Am hood and secure to the hood with integrated mounting studs....

Product#: B200

1967-69 Camaro, Firebird, 1966-79 Nova; Fiberglass Hood Springs; 11 lbs; Low Tension Design; Pair

Never have to use a 'prop' rod on your fiberglass hood again. These lower tension springs allow you to retain the original hood functionality without needing assistance to open it. Designed to fit in the stock position, these...

Product#: BP1182Z

1969-72 Pontiac GTO, 1970-72 Oldsmobile Cutlass; Hood Release Cable & Latch Kit

Reproduction hood release latch and cable kit for 1968-70 Pontiac Tempest, LeMans, 1968-72 GTO and 1970-72 Oldsmobile Cutlass and 1970-71 442 models. For applications that have inside hood release. This kit comes with both...

Product#: 3907627

1967-69 Chevy Camaro; Cowl Induction Hood Spring; 26 Coils; Each; Made in the USA!

Reproduction of the original 1969 Camaro cowl induction hood spring. Can also be used for 1967-68 Camaro models with cowl hoods. Manufactured to exact dimensions from premium grade spring steel with a black chromate finish...

Product#: BP12797S

1969-72 Buick Skylark, GS, GS 455, 1969 GS 350, GS 400; Ram Air Hood Seal Scoop Plates; Pair

These special plastic plates are a must for various 1969-72 Buick GS, GS 455, GS 400 models equipped with ram air. They attach to the underside of the hood and create a flat area for the air cleaner foam seals to press up...

Product#: 20429338

1979-1985 Riviera, Eldorado, Seville, Toronado; Hood Release Cable & Mounting Bracket

Reproduction hood release cable with the mounting bracket and grommet for 1979-85 Toronado, Seville, Eldorado and Riviera models. This replaces the original exactly. Sold individually. GM# 20429338. {specs} {fitment}

Product#: 3863300

1965 Chevy II/Nova Hood Latch

Reproduction hood latch assembly for 1965 Chevy II/Nova models. Latch assembly is manufactured to exact specifications to ensure perfect fit and function.

Product#: 9611970

1971-75 Chevrolet and Oldsmobile; Hood Release Cable and Handle; 2 Piece Style

Reproduction hood latch release cable and handle assembly for 1971-75 Chevrolet and Oldsmobile models. This cable is manufactured to factory specifications and replicates the original in quality, design, and fitment. Includes...

Product#: 3965713

1967-92 Camaro, Firebird; Hood Prop Rod for Fiberglass Hoods; Each; Made in the USA!

Hood prop required when installing a fiberglass hood on your Camaro or Firebird. Since hood springs are not recommended when using fiberglass hoods, this prop is essential for keeping your hood open while working in the...

Product#: 152684

1960-66 Chevrolet, GMC, Pickup, Panel, Suburban; Hood Hinge Spring; Each

Restore smooth hood operation with this high-quality reproduction hood hinge spring for 1960-66 Chevrolet and GMC trucks. Built to precise factory specifications, this spring ensures correct fitment, authentic tension, and...

Product#: 153046

1968-74 Chevy II Nova; Hood Catch Assembly; with Pilot Bolt

Reproduction of the original hood catch and 3" pilot bolt assembly for use with 1968-74 Chevy II and Nova models. Manufactured in stamped steel to OE specifications that replicate the original in quality and design. This...

Product#: CX1248

1955 Bel Air, 150, 210; 1955-57 Chevrolet, GMC Truck; Hood Hinge Spring; Pair

Bring your Tri-Five Chevy back to life with this OER reproduction hood hinge spring set! Engineered to deliver the same look, feel, and performance as the originals, these springs provide the proper lift and tension needed...

Product#: BP1113Z

1973-77 Chevrolet Malibu, Monte Carlo, Olds Cutlass; Hood Hinge; LH Driver Side

Replacement hood hinge for various 1973-77 GM applications including Malibu, Monte Carlo and Cutlass. Replace the old or damaged with this brand new quality Replacement. Does not include the hood hinge spring. LH - driver...

Product#: BP4808T

1969-72 Oldsmobile Cutlass, F85, 442, Cutlass Supreme, Vista Cruiser; Hood Hinge; RH Passenger Side; GM # 403726

Reproduction hood hinge assembly for 1969-72 Cutlass, 442, W30, W31, Rally 350 models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing...

Product#: BP1167T

1969-72 Oldsmobile Cutlass, F85, 442, Cutlass Supreme, Vista Cruiser; Hood Hinge; LH, Driver Side; GM # 403727

Reproduction factory style hood hinge for 1969-72 Oldsmobile Cutlass, 442, W30, W31 Rally 350 and F85 models. Replace the worn out hinge and get the proper hood alignment on factory steel or Ram Air hood. {specs} {fitment}

Product#: BP1180Z

1969-72 Pontiac GTO, LeMans: 1970-72 Oldsmobile Cutlass Supreme, Cutlass, F85; Inside Hood Release Handle/Cable

Inside hood latch release handle cable with handle for various 1969-72 GM applications including, Oldsmobile Cutlass, Pontiac GTO models. It has a black housing with a chrome knob, border and lettering that mounts underneath...

Product#: 3903974

1967 Impala, 1968-69 Camaro; SS Hood Louver Drains; Pair; Made in the USA!

Reproduction of the original Super Sport hood louver drain tubes for use with 1967 Impala SS, and 1968-69 Camaro Super Sport models. These drain tubes install under the hood substructure and are designed to direct water from...

Product#: 494409

1970-81 Pontiac Firebird; Hood Pop-Up Spring

Reproduction hood pop-up spring for all 1970-81 Firebird models. Manufactured with correct contours, this spring will pop the hood up for access when the hood release lever is actuated. 1 required per vehicle. Features and...

Product#: F12352

1969 Firebird, Trans Am; Lower Ram Air Cable

Reproduction of the original upper Ram Air cable for use on 1969 Firebird and Trans Am models with 400 hood. The lower cable goes from the Ram Air pan to the inside of the car and connects to to the cable support bracket....

Product#: 949621

1967-69 Firebird; Hood Latch Angled Support Brace

Reproduction of the original hood latch angled support brace designed for use with 1967-69 Pontiac Firebird models. Each retainer is manufactured in stamped steel to factory dimensions replicating the original in design,...

Product#: BP1178G

1971-72 Pontiac GTO; Hood Latch; Release Handle

Reproduction hood latch release pull handle/rod for 1971-72 Pontiac GTO hood release handle rod. This is an exact reproduction. sold individually. {specs} {fitment}

Product#: BP1179G

1971-72 Pontiac LeMans; Hood Latch; Release Handle

Reproduction hood latch release pull handle/rod for 1971-72 Pontiac LeMans hood release handle rod. This is an exact reproduction. sold individually. {specs} {fitment}

Product#: 325271

1973-76, 1984-90; Chevrolet, Buick, Oldsmobile; Hood Latch Pop-Up Spring; Various Models

Reproduction hood pop-up spring for various 1973-76 and 1984-90 Chevrolet, Buick, and Oldsmobile models. Manufactured to factory specifications from spring steel. Features and Benefits: Authentic reproduction matching factory...

Product#: F12354

1969 Firebird, Trans Am; Ram Air Cable Connector Bracket

Reproduction of the original cable connector bracket designed for use with 1969 Firebird and Trans Am models. Bracket is manufactured in stamped steel to factory dimensions. Includes 2 mounting holes. Designed to hold both...

Product#: BP12810Z

1971-79 Pontiac, Buick, Oldsmobile, Cadillac; Hood Latch Pop-Up Spring; Various Models; GM# 408576

Replacement hood lock pop-up spring for multiple 1971-79 GM applications including LeMans, Toronado, Apollo models. This is the spring that mounts to the hood latch and pops the hood up to get to the safety catch to open the...

Product#: EN2202Z

1964-66 Various Pontiac Models Including GTO, Grand Prix, LeMans; Hood Insulator Pad Clip

Reproduction hood insulator pad clip for various Pontiac models including, GTO, LeMans, Grand Prix and Tempest. These are the metal clips/retainers that hold the hood insulator pad in place and are 1.5" square shape. The hood...

Product#: 409025

1966-79 Buick, Chevy, Pontiac, Oldsmobile; Hood Hinge Spring; Each; Various Models

Correct replacement hood hinge spring designed for use with various 1966-79 GM models with a standard hood. Each hood hinge spring is manufactured in quality spring steel that matches the OE tension ratio. Overall length: 8...

Product#: 14034129

1970-81 Camaro, Firebird; Hood Hinge Assembly; LH Driver Side; EDP Coated

Reproduction hood hinge for 1970-81 Camaro and Firebird models. Replace your original bent hood hinge with this superb quality OER® reproduction hinge. Original hood hinges can bend or become damaged over time, making...

Product#: F12343

1969 Pontiac Trans Am; Ram Air Hood Tubes; Pair

Reproduction hood tubes for 1969 Pontiac Trans Am models with Ram Air. Each tube is designed to replace the original exactly. These tubes mount on the underside of the hood from the Ram Air scoops to the Ram Air pan that...

Product#: F12336

1967-68 Pontiac Firebird; Ram Air Hood Pan; Steel

Reproduction of the original Ram Air hood pan designed for use with 1967-68 Firebird models. Each pan is manufactured in quality stamped steel replicating the original in design and fitment. This Ram Air hood pan mounts to...

Product#: *881380

1982-92 Camaro, Firebird; Hood Hinge Assemblies; with Stud; RH & LH; Pair

Reproduction hood hinge for 1982-92 Camaro and Firebird models. Replace the original bent hood hinge with this high-quality reproduction that replicates the original in both design and function. Original hood hinges often...

Product#: BP12796S

1981-88 Buick Skylark, GS, GS 455; Hood Scoop Louver Insert; Bezel; Pair

Reproduction plastic hood louver insert bezel for 1970-72 Buick Skylark, GS and GS 455 models. These bezels are paint to match application and will accept both hood louver types. Sold in pairs. {specs} {fitment}

Product#: 3890741

1967-72 Chevy, GMC Pickup, Blazer, Suburban; Hood Hinge Spring; Each; Made in the USA!

Reproduction of the original hood spring designed for use on 1967-72 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Each spring is manufactured to exact factory specifications with the correct tension ratio to...

Product#: K892982

1967-69 Firebird; Hood Inserts; 400 Hood; Open Vent Style; Die-Cast; Pair

Reproduction hood inserts for 1967-69 Firebird 400 models. Each hood insert is manufactured in quality die-cast zinc and features an open vent design that can be mounted directly into any original GM or reproduction 1967-69...

Product#: TF400299

1957 Chevy Bel Air, 150, 210, Nomad, Del Ray; Hood Hinge Spring; Each; Made in the USA!

OER reproduction of the original hood hinge spring for 1957 Chevrolet Bel Air, One Fifty Series, Two-Ten Series, and Nomad models. Each spring is manufactured to OE specifications and features the correct tension ratio. 2...

Product#: K555

1958-77 GM; Hood Adjuster Bolt and Nut Set ; 5/16"-18 x 1-3/8"; Various Models

Reproduction of the original hood stop bolt and nut set designed for use on various 1958-77 GM models. This bolt and nut set will keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct...

Product#: TF400297

1955 Bel Air, 150, 210; 1955-57 Chevy, GMC Truck; Hood Hinge Spring; Each; Made in the USA!

OER reproduction of the original hood hinge spring for 1955 Chevrolet Bel Air, One Fifty Series, Two-Ten Series, Nomad, and 1955-57 Chevrolet/GMC truck models. Each spring is manufactured to OE specifications and features the...

Product#: 345535

1975-79 Chevrolet Nova; Hood Latch Assembly

Reproduction of the original hood latch catch assembly for 1975-79 Chevrolet Nova models. Each hood latch will replace the original worn out or damaged factory original. Completely assembled and ready to install. Manufactured...

Product#: TF400298

1956 Chevy Bel Air, 150, 210; Hood Hinge Spring; Each; Made in the USA!

OER reproduction of the original hood hinge spring for 1956 Chevrolet Bel Air, One Fifty Series, Two-Ten Series, and Nomad models. Each spring is manufactured to OE specifications and features the correct tension ratio. 2 are...

Product#: B210

1967-69 Camaro, Firebird, 1966-79 Nova, 68-72 Chevelle, El Camino 69-80 Truck; Fiberglass Hood Springs; 15 lbs; Medium Tension Design; Pair

Never have to use a 'prop' rod on your fiberglass hood again. These medium tension springs allow you to retain the original hood functionality without assistance. Designed to fit in the stock position, they restore proper...

Product#: 3819353

1962 Impala, Bel Air, Biscayne; Hood Hinge Spring; Each

OER reproduction of the original hood hinge spring designed for 1962 Impala and full size models including Bel Air and Biscayne. Sold individually. Two required per vehicle. Features and Benefits: Authentic OER reproduction...

Product#: 9612865

1971-90 Chevy Full Size, 1973-90 Buick, Oldsmobile, Pontiac A-Body; Hood Release Cable and Handle Assembly: 1 Piece Cable; Various Models

Reproduction hood latch release cable and handle assembly for 1971-90 Chevrolet Impala/full size models and various 1973-90 Buick, Oldsmobile, and Pontiac A-Body models. This cable is manufactured to factory specifications...

Product#: 20429339

1978-87 Buick, Chevrolet, Oldsmobile, Pontiac A, G-Body; Hood Latch Release Cable; Various Models

Reproduction hood latch release cable for various 1982-87 Buick, Chevrolet, Oldsmobile, and Pontiac A and G-Body models. Each cable is produced to factory specifications and designed to replace the original exactly. Features...

Product#: BP1114Z

1973-77 Chevrolet Malibu, Monte Carlo, Olds Cutlass; Hood Hinge; RH Passenger Side

Replacement hood hinge for various 1973-77 GM applications including Malibu, Monte Carlo and Cutlass. Replace the old or damaged one with this brand new quality Replacement. Does not include the hood hinge spring. RH -...

Product#: B215

1970-81 Camaro; Fiberglass Hood Springs; Spring Rate; 20 lbs; Pair; Made in the USA!

Never have to use a 'prop' rod on your fiberglass hood again. These heavy tension springs allow you to retain the original hood functionality without assistance. Designed to fit in the stock position, they restore proper hood...

Product#: 10182100

1982-92 Pontiac Firebird, 1982-89 Chevrolet Camaro, Hood Release Cable

Reproduction hood release cable for 1982-89 Chevrolet Camaro and 1982-92 Pontiac Firebird models. Replace that broken hood release cable and handle assembly with this brand new one. GM part# 10182100. {specs} {fitment}