Product#: 3892756

1967 Camaro, Firebird; Rear Axle Bumper; Each

Reproduction rear axle bumper mounts on inner wheelhouse on all 1967 Camaro and Firebird models. Attaches to the body to prevent the rear axle from bottoming out. Sold individually. 2 required per vehicle. {fitment}

Product#: A9591311

1967-69 Camaro & Firebird with Mono-leaf Springs - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: M12140

1993-02 Camaro / Firebird with 4-Channel ABS Moser C-Clip Axles, 10 Bolt, 32" Long, 28 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12133

1967-76 Moser C-Clip Axles 12 Bolt 29-1/2" Long 30 Spline

Moser offers forged steel street axles for 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12134

1970-81 Camaro / Firebird Moser C-Clip Axles 10 Bolt 30-1/16" Long 28 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12135

1970-81 Camaro / Firebird Moser C-Clip Axles 10 Bolt 30-1/16" Long 30 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12138

1982-92 Camaro / Firebird Moser C-Clip Axles 10 Bolt 30-5/16" Long 28 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12141

Moser Factory Axle C-Clip Eliminator with Factory Axles and 1.400" Bearing Seat

Our improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...

Product#: M12142

Moser Axle C-Clip Eliminator with Moser Axles and 1.533" Bearing Seat

Our improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...

Product#: G6045

1965-81 Axle Shaft Lock/C-Clip (.150)

Original replacement locks for applications below. Fits 1967-81 with.150 horseshoe.

Product#: W507

1965-89 GM Rear Axle Bearing

Prevent costly damage by replacing rear axle bearings before they seize with this premium replacement rear axle bearing. Always check the bearings and seals whenever removing the rear drums/axle for signs of wear. Sold...

Product#: W508

67-69 Firebird Rear Axle Bearing

Prevent costly damage by replacing rear axle bearings before they seize! Premium replacement rear axle bearings for 1967-69 Firebird models. 2 required.

Product#: W1563

1965-02 Rear Axle Repair Bearing

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...

Product#: M28259

Moser 7/16" - 20 X 1-3/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with disc brakes. These are a great addition when installing Moser axles on your vehicle or just replacing your old wheel studs. Sold as a set of 10. One...

Product#: M28060

Moser 7/16" - 20 X 1-1/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. Note:...

Product#: A9593312

1982-92 Camaro & Firebird - Currie 9" Housing and Axle Kit with Torque Arm

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: A9592312

1970-81 Camaro & Firebird - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: A9591312

1967-69 Camaro & Firebird with Multi-leaf Springs - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: G4657

1998-02 Camaro / Firebird Rear Axle Shaft

Replace your bent or broken axle shafts with high quality original GM axles. This axle is 30-5/32" overall length with 28 splines for an 8.5", 10-bolt axle housings. Will replace the RH or LH axle. Wheel studs or bearing not...

Product#: M12131

1967-76 Moser C-Clip Axles 10 Bolt 29-1/2" Long 28 Spline; 5 x 4-3/4" Bolt Pattern

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Applications:...

Product#: M12136

1970-81 Camaro / Firebird Moser C-Clip Axles 12 Bolt 30-1/16" Long 30 Spline

Moser offers forged steel street axles for 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12137

1982-92 Camaro / Firebird Moser C-Clip Axles 10 Bolt 30-5/16" Long 26 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12132

1967-76 Moser C-Clip Axles 10 Bolt 29-1/2" Long 30 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12139

1993-02 Camaro / Firebird with 3-Channel ABS Moser C-Clip Axles, 10 Bolt, 32" Long, 28 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: R10CRMKT

GM 8.2 Differential Master Bearing Kit

For GM 8.2" (10 Bolt), 1.7812" ID Bearings, Fits Aftermarket Ring and Pinion, OEM Ring and Pinion Applications Require Part# 3106. Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot...

Product#: W320

1982-87 Firebird Rear Axle Repair Kit

Product#: W321

73-81 Firebird Rear Axle Repair Kit

Product#: 3932734

1968-69 Camaro, Firebird; Rear Axle Bumper with Bracket; RH Passenger Side

Reproduction of the original rear axle bumper and bracket for 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension is fully...

Product#: 3932733

1968-69 Camaro, Firebird; Rear Axle Bumper with Bracket; LH Driver Side

Reproduction of the original rear axle bumper and bracket for 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension is fully...

Product#: 3932735

1968-69 Camaro, Firebird; Rear Axle Bumper; Each

Reproduction of the original rear axle bumper for 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension is fully compressed. For use...

Product#: 1236317

1971-2002 GM; Rear Axle Ventilator; Various Models; Reproduction; For.452" Hole

Reproduction rear axle ventilator for various 1971-2002 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models as listed. Each ventilator is manufactured in quality injection molkded ABS replicating the original design...

Product#: C229200

Competition Engineering Fabricated Ford 9" Rear Housing; Full Bodied Car; Mild Steel; 3" Axle Tubes; 60.75" Length

Competition Engineering Mild Steel Rear End. Fabricated Ford 9" rear axle housing triangulated design offers increased strength over three piece stock housings. CAD designed, CNC manufactured and offered in 4130 Chrome Moly...

Product#: W8660

1964-02 Rear Axle Bearing Seal

Prevent premature bearing or brake failure! Replace cracked or deteriorated rear axle seals to keep gear oil and grease in the axle tube, where it belongs. Sold individually. 2 required per vehicle. Applications: 1967-86...

Product#: WB90

1973-79; 85-91 GM - Rear Axle Bearing

Prevent costly damage by replacing rear axle bearings before they seize! Always check the bearings and seals whenever removing the rear drums for signs of wear. Sold individually. 2 required per vehicle. Note: 7.75" rear ends...

Product#: 15771000

1953-2010 GM; Rear Axle/Transmission Ventilator; for 3/8" Hole

OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...

Product#: 483746

1971-82 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Compression Rubber Bumper, Second Design; Various Models

Reproduction rear axle compression bumper which attaches to the body and keeps the rear axle from bottoming out. Manufactured using hard rubber material with molded in stud for mounting. This is the second design bumper that...

Product#: G7128

1/2" Transmission and Axle Drain Plug

Correct plug which is removed when draining or filling the rear axle or transmission lubricant.