Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...

Product#: K630

1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long

Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...

Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: 368077

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Tension Spring; Various Car and Truck Models

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

Product#: *R323

1967-68 Firebird Fuel Tank Kit (Stainless Tank)

Each kit provides the individual components needed for a complete replacement. Fuel tank sending units are sold separately due to differences in engines, options, etc. Note: Shipped double oversize. Discount exem pt. Includes...

Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Product#: FT1000C

1967-68 Camaro, Firebird; Fuel Tank; Polished Stainless Steel; 18 Gallon

Reproduction of the original style fuel tank designed for use with 1967-68 Camaro and Firebird models. Each fuel tank is manufactured in quality polished stainless steel to factory specifications offering long-lasting...

Product#: *R324

1967-68 Firebird Fuel Tank Kit (Stainless Tank W/O Neck, Sleeve Or Clamp)

Each kit provides the individual components needed for a complete replacement. Fuel tank sending units are sold separately due to differences in engines, options, etc. Note: Shipped double oversize. Includes 1 Gas Tank...

Product#: FT1002C

1970 Camaro, Firebird; Fuel Tank; with Fuel Neck; without EEC; Stainless Steel; 18 Gallon; Without Vent Pipes

Correct reproduction fuel tank for 1970 Camaro and Firebird models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering originality with an upgraded stainless steel...

Product#: FT1001C

1969 Camaro, Firebird; Fuel Tank; with Fuel Neck; Stainless Steel; 18 Gallon Capacity

Correct reproduction of the original fuel tank designed for with 1969 Camaro and Firebird models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering originality with an...

Product#: 6428322

1967-72 Camaro, Nova, Firebird; Fuel Tank Sending Unit; 3/8"; with 1/4" Vent

Reproduction of the original fuel tank sending unit designed for use with 1967-68 Chevrolet Camaro and Firebird models with 3/8" line and 1/4" vent. After years of use, your fuel sending unit can stop working properly. When...

Product#: FT1000A

1967-68 Camaro, Firebird; Fuel Tank; 18 Gallon; Zinc Coated Steel

Reproduction of the original style fuel tank designed for use with 1967-68 Camaro and Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating offering long...

Product#: FT1009A

1998 Camaro, Firebird; Fuel Tank; with Fuel Neck; Zinc Coated; 15 Gallon Tank

Reproduction fuel tank with integrated neck for 1998 Camaro and Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating offering long lasting dependability....

Product#: 3998633

1967-69 Camaro, Firebird, 1967-72 Nova; Carburetor to Accelerator Cable; 6 Cylinder; OER

Reproduction accelerator cable for 1967 Camaro, Firebird (6 and 8 cyl), 1968-69 Camaro, Firebird (6 cyl), 1968-72 Nova (6 cyl) models. A faulty cable can lead to problems associated with acceleration and become a safety...

Product#: FT1100A

1967-69 Camaro, Firebird; Fuel Tank Mounting Straps; Black EDP Coated; Pair

Reproduction fuel tank mounting straps designed for use with all 1967-69 Camaro and Firebird models. These OE-style straps are built to factory specifications and crafted from heavy-duty stamped steel for long-lasting...

Product#: FT1003B

1970-1973 Camaro, Firebird; Ni-Terne Coated Fuel Tank; with EEC; 18 Gallon; With Vent Pipes

Reproduction Ni-Terne fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emission control). This OE-quality fuel tank is manufactured in stamped steel to factory specifications featuring a heavy Ni-terne...

Product#: FT1002B

1970 Camaro, Firebird; Ni-Terne Coated Fuel Tank; without EEC; 18 Gallon; Without Vent Pipes

Reproduction Ni-Terne fuel tank for 1970 Camaro and Firebird models. This OE-quality Ni-Terne coated reproduction stamped steel fuel tank is manufactured to factory specifications and is a great value, offering exceptional...

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: *R307

1967-68 Firebird Fuel Tank Kit

Each kit provides the individual components needed for a complete replacement. Fuel tank sending units are sold separately due to differences in engines, options, etc. Note: Shipped double oversize. Discount exem pt. Includes...

Product#: FT1006B

1982-87 Camaro/Firebird; Fuel Tank; 14 Gallon; Ni-Terne Steel; For Mechanical Fuel Pump Models

This OE-quality Ni-Terne coated reproduction stamped steel fuel tank is manufactured to factory specifications and is a great value, offering exceptional corrosion resistance. Includes the lock ring and o-ring gasket for the...

Product#: FT1008A

1993-97 Camaro, Firebird; Fuel Tank; with Fuel Neck; Zinc Coated; 15 Gallon Tank

Reproduction of the original style fuel tank designed for use with 1993-97 Camaro and Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating offering long...

Product#: 25000357

1976-81 Firebird; Fuel Tank Sending Unit; 3/8" Dual Line; with Air Conditioning

Reproduction fuel tank sending unit for various 1976-81 Pontiac Firebird models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or...

Product#: *R302

1969 Camaro / Firebird Fuel Tank Kit with 18 Gallon Zinc-Coated Tank

Replace all the necessary components for your 1969 Camaro or Firebird with Classic Industries® fuel tank kit. Each kit provides the individual components needed to replace you leaking or damaged fuel tank. Kit includes:...

Product#: FT1005A

1978-81 Camaro; 1979-81 Firebird; Fuel Tank; Zinc Coated; 21 Gallon Tank

Reproduction of the original style 21 gallon fuel tank designed for use with 1978-81 Camaro and 1979-81 Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc...

Product#: FT1003A

1970-73 Camaro, Firebird; Fuel Tank; with EEC; Zinc Coated; 18 Gallon Tank; With Vent Pipes

Reproduction 18 gallon fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emission control). Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating...

Product#: *R304

1967-68 Firebird Fuel Tank Kit (Zinc Coated Tank W/O Neck, Sleeve Or Clamp)

Each kit provides the individual components needed for a complete replacement. Fuel tank sending units are sold separately due to differences in engines, options, etc. Note: Shipped double oversize. Discount exem pt. Includes...

Product#: 5973205

1979-81 Firebird,Trans Am; Fuel Door Assembly; with Spring and Bracket; Smoke

Reproduction rear panel fuel door assembly for 1979-81 Firebird & Trans Am models. Features smoke lens and is produced with the recess area for models equipped with the Firebird emblem on the fuel door (emblem is not included...

Product#: 7693146

1967-68 Pontiac Firebird; Upper Fuel Tank Filler Neck

Reproduction upper fuel tank filler neck for 1967-68 Pontiac Firebird models. Each fuel tank neck is manufactured to correct dimensions allowing replacement of the old or damaged original. {fitment}

Product#: 5973870

1979-81 Firebird, Trans Am; Fuel Door Assembly; with Spring and Bracket; Smoke

Reproduction rear panel fuel door assembly for 1979-81 Firebird & Trans Am models. Features smoke lens and is produced without the recess area for models that did not include the Firebird emblem on the fuel door. Each...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: 153249

1985-92 Camaro, Firebird; Fuel Tank Sending Unit

After years of use, your fuel sending unit can corrode. Its float can flood, and it can simply stop working, causing your fuel gauge to read incorrectly or even not at all. This Delco Service Replacement will replace your...

Product#: 9792222

1968-69 Firebird; Accelerator Control Cable; with 2 bbl. Carburetor; OER

Reproduction of the original accelerator cable designed for use with 1968-69 Firebird models with 1 or 2 bbl carburetors. Faulty cables can lead to problems associated with acceleration and become a safety hazard. After years...

Product#: K518

1967 Firebird; Accelerator Pedal Assembly; V8; 326ci, 400ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: 6428069

1967 Camaro, 1967-68 Firebird; Fuel Tank Sending Unit; 5/16" Single Line

Reproduction fuel tank sending unit for 1967 Chevrolet Camaro, and 1967-68 Firebird models with 3/8" single line. After years of use, your fuel sending unit can stop working properly. When that happens, it can cause your fuel...

Product#: 153158

1970-73 Camaro, Firebird; Fuel Tank Sending Unit; 3/8" Line with 1/4" Return Line

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how much fuel...

Product#: F12382

1979-81 Firebird, Trans Am; Fuel Door; Smoked; without Logo

Reproduction of the original fuel door designed for use with 1979-81 Firebird and Trans Am models. Each fuel door is manufactured to correct factory specifications and features a smoke color with red reflector at the bottom...

Product#: FT1103B

1976-81 Camaro, Firebird; 76-79 Nova, Apollo, Omega, Ventura; Fuel Tank Mounting Straps; Stainless Steel; Pair

Reproduction of the original style fuel tank mounting straps designed for use with 1976-81 Camaro, Firebird, and 1976-79 Nova, and X-body GM models. Each strap is manufactured in quality stainless steel to original factory...

Product#: 496796

1974-75 Various Pontiac Models Firebird, Catalina; Choke Heater Tube Kit

Reproduction choke tube kit for 1974-75 Pontiac models such as Firebird and Catalina. This kit is an exact copy of the OEM and contains the tubes and the rubber hose connection. For use with 4BBL Carburetors on 350, 400 or...

Product#: PY4206

1971-74 Trans-Am Throttle Cables

These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.

Product#: 14394

1968-69 Firebird; Accelerator Cable; with Quadrajet

Reproduction accelerator cable for 1968-69 Firebird models with 4 bbl carburetor. Each cable is manufactured to correct factory specifications replacing the old or frayed original cable exactly. {fitment}

Product#: PY4216

1970 Firebird, Trans Am; Accelerator Lever Cable; 350, 400, 455 HO, or Ram Air

Reproduction accelerator lever cable for 1970 Firebird and Trans Am models with 350, 400, 455 HO or Ram Air. This cable extend from the accelerator to the throttle arm. If your original cable shows signs of fraying or...

Product#: 15122

1977 Pontiac Firebird, Trans Am with 403 Motor, 1975-77 Impala, Full Size; Accelerator Throttle Cable

Exact reproduction throttle cable for 1975-77 Impala, Full Size and 1977 Firebird Trans Am models with a 403 motor. Features the eyelet style end on the cable at the carburetor and mounts to the throttle cable bracket with...

Product#: FT1103A

1976-81 Camaro, Firebird; 1976-79 Nova; Fuel Tank Mounting Straps; Pair

Reproduction fuel tank mounting straps produced using heavy duty zinc-plated pre-formed steel for an original appearance. If you are replacing your gas tank or restoring your classic, you may want to replace your old gas tank...

Product#: FT1102A

1973-75 Nova, Apollo, Omega, Ventura; 1974-75 Camaro, Firebird; Fuel Tank Mounting Straps; Zinc Coated Steel; Pair

Reproduction of the original fuel tank mounting straps designed for use with 1974-75 Camaro, Firebird, and 1973-75 Nova and GM X-Body models. Each strap is produced using heavy duty pre-formed steel for an original...

Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...

Product#: 14987

1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve

Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...

Product#: 153665A

1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

Product#: 153847

1993-97 Camaro, Firebird; Fuel Tank Filler Neck

Reproduction of the original fuel tank filler neck for use with 1993-97 Camaro and Firebird models. Manufactured to factory specifications featuring the correct gas cap opening for proper fit, and functionality. Each filler...

Product#: 153665B

Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

Product#: 153846

1982-92 Camaro, Firebird; Fuel Tank Filler Neck

The original GM tank on 1982-92 models suffered from an inherent flaw at the neck joint, and were recalled back-in-the-day for leaking around the solder joint, which was prone to cracking at the seam. Our reproduction fuel...

Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...

Product#: 9047G

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length

Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....

Product#: C891741

1967 Firebird; Carburetor Lever Extension Bracket; with 400 and 4 bbl Carburetor

Reproduction 1967 Pontiac Firebird throttle lever arm, also known as the carburetor lever extension. This is the throttle arm bracket that is used only on 1967 Firebird V8 equipped models with 4 barrel Quadrajet carburetor....

Product#: CB21725Z

1970-71 Corvette, Camaro, Chevelle, Nova, C10, Blazer, Carburetor Heat Shield; Models with a QuadraJet Carburetor

Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...

Product#: CB5379F

1967 Firebird; Quadrajet Throttle Arm; For V8

Reproduction 1967 Pontiac Firebird throttle lever arm, also known as the carburetor lever extension. This is the throttle arm bracket that is used only on 1967 Firebird V8 equipped models with 4 barrel Quadrajet carburetor....

Product#: 9789015

1967 Pontiac Firebird; Accelerator Pedal Rod ; with V8

Reproduction of the original accelerator pedal rod designed for use on 1967 Firebird models with V8 engines. The pedal rod is the final link in your Firebird models accelerator/throttle activation system. This special rod...

Product#: TF700512

Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.

Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...

Product#: 9789018

1967 Firebird; Accelerator Pad To Rod Support; OE Style Steel Reproduction

Reproduction of the original accelerator pad to rod support designed for use on 1967 Firebird models. This is the support that bolts to the firewall and holds the accelerator pedal shaft. This item will replace your often...

Product#: 153845

1979-81 Camaro, Firebird; Fuel Tank Filler Neck

Reproduction of the original fuel tank filler neck for use with 1979-81 Camaro and Firebird models. Manufactured to factory specifications featuring the correct gas cap opening for proper fit, and functionality. Each filler...

Product#: 340637

1974-81 Outer Accelerator Pull Spring

Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...