Product#: 140025

1970-73 Camaro, Firebird; Exhaust Hanger; LH, Driver Side

Reproduction exhaust hanger for 1970-73 Camaro and Firebird models. Replace your missing exhaust hanger with this quality reproduction, for vehicles equipped with dual exhaust systems. The hanger includes the mounting plate...

Product#: 140026

1970-73 Camaro, Firebird Exhaust Hanger; Passenger Side

Reproduction exhaust hanger for 1970-73 Camaro and Firebird models. Replace your missing exhaust hanger with this quality reproduction, for vehicles equipped with dual exhaust systems. The hanger includes the mounting plate...

Product#: SK100

Doug"s Headers; LS1 Adapter Plate Set

This Doug's Headers motor mount adapter plate kit is for installing LS1/LS6 engines in early Camaros and Chevelles. The adapter plate is designed to locate the 1997-2013 LS1 and LS6 engines into the same position as a...

Product#: SS719101

7-1/2" High Temperature Stainless Steel Cable Tie

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Product#: HT9802

1998-02 Camaro/Firebird; Exhaust Hanger Kit; Driver/Passenger Side; LS1; Rear

Reproduction rear exhaust hanger kit for 1998-02 Chevrolet Camara and Pontiac Firebird models with an LS1 engine. This authentic reproduction comes with the brackets the rubber insulators and the bolts for the rear section of...

Product#: SS719102

14-1/2" High Temperature Stainless Steel Cable Tie

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Product#: 35336

Heavy Duty Exhaust Clamp; 2-1/4"; 3/8" Thread U-Bolt

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}

Product#: 35527

1970-81 GM; Various Models; Exhaust Hanger

When it comes to a variety of exhaust hangers, Classic Industries® has the best selection! {specs} {fitment}

Product#: 67921

Chevrolet Small Block Square Port Proform Soft Conforming Aluminum Header Gaskets

Soft conforming aluminum gaskets easily conform to the header flanges for a superior seal. Each set comes with 2 gaskets.

Product#: A7400142

Pypes Stainless Steel Exhaust Band Clamp; Butt Connector; 3" Diameter X 3" Wide

Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...

Product#: A7400141

Pypes Stainless Steel Exhaust Band Clamp Butt Connector; 2.5" Diameter X 3" Wide

Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...

Product#: 35408

Standard Duty Exhaust Clamp; 2"; 5/16" Thread U-Bolt

Replacement style clamps for use with most applications requiring a 2" exhaust clamp.

Product#: 67927

Proform 3" Soft Conforming Aluminum Collector Gasket Set

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts. {fitment}

Product#: 11435

Hooker; Collector Ring Kit for 3-1/2" Collectors

Hooker collector rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.

Product#: 35337

Heavy Duty Exhaust Clamp; 2-1/2"; 3/8" Thread U-Bolt

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}

Product#: KW673

1969 Camaro, Firebird; Dual Exhaust Hanger Mounting Plate; Drivers Side

Reproduction of the original exhaust hanger mount plate designed for use with 1969 Camaro and Firebird models with factory dual exhaust. Each bracket is manufactured in stamped steel replicating the original Fisher Body plate...

Product#: 35648

1984-97 Chevrolet Camaro/Pontiac Firebird; Intermediate Exhaust Hanger

When it comes to a variety of exhaust hangers, Classic Industries® has the best selection! {specs} {fitment}

Product#: 35245

1982-93 GM; Various Models; 6 & 8 Cylinder; Catalytic Converter Hanger

Correct replacement catalytic converter support hanger bracket designed to replace the missing, broken or dry rottted originals. Fits various GM car models. {specs} {fitment}

Product#: 35413

Standard Duty Exhaust Clamp; 2-1/4"; 5/16" Thread U-Bolt

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}

Product#: A7400140

Pypes Stainless Steel Exhaust Band Clamp; 2.5" Diameter X 1" Wide

Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...

Product#: HC93

1967-69 Camaro, 1968 Nova, 1974-75 Impala; Exhaust Clamp; 2 1/4"; Saddle Style; OE Material

Correct reproduction of the original "saddle-style" 2 1/4" muffler clamp for use with various 1967-68 Camaro, 1969 Camaro (with dual exhaust, chambered exhaust), 1968 Nova (with dual exhaust), and 1974-75 Impala, Bel Air,...

Product#: HC92

1964-81 Camaro, Firebird, Chevelle, Nova, Impala; Exhaust Clamp; 2"; Saddle Style; OE Material

Correct reproduction of the original "saddle-style" 2" muffler clamp for use with various 1964-81 Camaro, Firebird, Nova, Chevelle, Impala, Bel Air, and Caprice models as listed. Each clamp is manufactured with quality OE...

Product#: 35794

Heavy Duty Exhaust Clamp; 3"; 3/8" Thread U-Bolt

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}

Product#: *SS729102

5 Piece 14-1/2" High Temperature Stainless Steel Cable Tie Kit

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Product#: EB35181

1975-78 GM; Buick, Chevrolet, Oldsmobile, Pontiac; Muffler Support Bracket

Correct replacement muffler support brackets designed to replace the original missing or broken bracket. Buick Applications: 1975-1977 Buick Century 231ci V6 1977-1977 Buick Century 305ci V8 1975-1977 Buick Century 350ci V8...

Product#: 35880

1967-68 Chevrolet Camaro/1967-69 Pontiac Firebird/1968-74 Nova; Exhaust Muffler Hanger

Classic Industries® offers a variety of exhaust hangers and brackets to make replacing exhaust parts easy. Each bracket is designed to replace the original hanger or bracket and usually includes the correct design....

Product#: E242

Exhaust Clamp; 2-1/2" ; with Chambered or Aluminized Exhaust; Stainless Steel

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps. {fitment}

Product#: E241

Exhaust Clamp; Stainless Steel; 2-1/4"; 3/8" Thread U-Bolt

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps. {specs} {fitment}

Product#: 35335

Heavy Duty Exhaust Clamp; 2"; 3/8" Thread U-Bolt

Correct replacement style exhaust clamp designed for use with most early applications as listed. Each clamp is manufactured in heavy duty stamped steel and includes 3/8" thread U-bolt. Please check your applications carefully...

Product#: 523540

1967-74 Pontiac Firebird; Exhaust Manifold Locks; V8; Each

Reproduction of the original exhaust manifold locks for us with 1967-81 Pontiac Firebird models with V8 engines. Each lock is manufacturedin hardened steel and used to keep the exhaust manifold bolts from inadvertently...

Product#: E240

1967-92 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Stainless Steel; Each

Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each clamp is manufactured in quality stainless steel replicating the original design for an authentic appearance. Great...

Product#: G9627

Exhaust Clamp 2"

We offer the original factory replacement exhaust pipe clamps which are superior to aftermarket clamps. These clamps include the U-bolt, clamp closeout and two attachment nuts. Excellent for the "hard core" restorer.

Product#: 35358

1973-91 GM; Various Models; Muffler Bracket

Correct replacement style muffler bracket for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}

Product#: 67920

Proform 2-1/2" Soft Conforming Aluminum Collector Gasket Set

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

Product#: HPC200

Lake Pipes 2" Mounting Clamps

Why bolt up your new side pipe exhaust system with those rusty old clamps you've got laying around. Finish off your exhaust system with these stylish chrome clamps. Sold individually.

Product#: 67928

Proform 3-1/2" Soft Conforming Aluminum Collector Gasket Set

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

Product#: E245

Exhaust Clamp; Cadmium Plated; 2-1/2"; 3/8" Thread U-Bolt

Plated exhaust clamps now available for chambered or aluminized exhaust systems that offer long-lasting effectiveness over the original style non-coated clamps. {specs} {fitment}

Product#: HC95

1964-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2 1/4"; "Guillitone" Style; OE Material

Correct reproduction of the original "Guillotine-style" - 2 1/4" muffler clamp for use with 1964-66 Chevy / GMC pickup trucks, 1967-74 Camaro, Chevelle, and Nova dual exhaust models. Each clamp is manufactured with quality OE...

Product#: F331

1967-81 Pontiac Firebird; Tail Pipe Clamps 2 1/4" Diameter; Pair

Reproduction of the original style band clamps for use on 1967-81 Pontiac Firebird models. If you're looking for original-style 2 1/4" tailpipe clamps, you've come to the right place. These clamps are manufactured to correct...

Product#: E244

1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2 1/4"; Cadmium Plated; Each

Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each 2 1/4" clamp is manufactured in quality stamped steel and cadmium plated replicating the original design for an...

Product#: 35475

1982-97 Chevrolet Camaro/Pontiac Firebird; Exhaust Hanger

When it comes to a variety of exhaust hangers, Classic Industries® has the best selection! {specs} {fitment}

Product#: F330

1967-81 Pontiac; Tail Pipe Clamps 2" Diameter; Pair

Reproduction of the original style band clamps for use on 1967-81 Pontiac Firebird models. If you're looking for original-style 2" tailpipe clamps, you've come to the right place. These clamps are manufactured to correct...

Product#: HC94

1967-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2"; "Guillitone" Style; OE Material

Correct reproduction of the original "Guillitone-style", 2" muffler clamp for use with 1967-74 Camaro, Chevelle, and Nova models as listed. Each clamp is manufactured with quality OE cold-rolled steel material, offering the...

Product#: *SS729104

10 Piece 14-1/2" High Temperature Stainless Steel Cable Tie Kit

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Product#: 10243316

1998-02 Camaro, Firebird; Rubber Insulator; Rear Exhaust Hanger; LS1; Each

Reproduction rear exhaust hanger for 1998-02 Chevrolet Camara and Pontiac Firebird models with an LS1 engine. This authentic reproduction of the rubber insulator for the rear section of the exhaust system. Sold...

Product#: E243

1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Cadmium Plated; Each

Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each clamp is manufactured in quality stamped steel and cadmium plated replicating the original design for an authentic...

Product#: *SS729103

10 Piece 7-1/2" High Temperature Stainless Steel Cable Tie Kit

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Product#: 35334

Exhaust Clamp 2 1/8"

Correct replacement style Walker exhaust clamp for use with most applications requiring 2-1/8" clamp. Please check your applications carefully before ordering.

Product#: *SS729101

5 Piece 7-1/2" High Temperature Stainless Steel Cable Tie Kit

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Product#: 31400

Exhaust Pipe Flange Gasket; 2" ID X 2-1/2" OD

Replacement exhaust pipe flange gasket for various makes and models including Ford/Mercury, Chevrolet/GMC/Pontiac, and others. They are designed to meet or exceed OE specifications for quality, fit, and function. 1 for...

Product#: TT13105

10 Piece Stainless Steel Snap Strap Set

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Six 9" straps Four...

Product#: TT13101

12 Piece Stainless Steel Snap Strap Set

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9" straps Four...

Product#: TT13150

12 Piece 9" Stainless Steel Snap Strap Set

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA