Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...

Product#: 356513

1976-81 Firebird; 1975-79 Nova, GM X-Body; Subframe Body Mount Bushing; # 3 Position; Upper Bushing

Reproduction of the original GM sub frame body mount for 1976-81 Firebird and 1975-79 Nova/GM X-Body models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the original...

Product#: 356515

1975-79 Nov, Ventura, Skylatk, Omega, 1975-81 Firebird; Body Mount Bushing; Lower; # 2 Position

Replacing the original bushings with rubber reproductions is a sure fire way of maintaining originality and mounting the subframe exactly the way the factory intended. Replaces OE # 356515. {fitment}

Product#: 332608

1973-81 Camaro; 1973-75 Firebird; Subframe Body Mount Bushing; # 2 Position; Upper Bushing

Reproduction of the original GM sub frame body mount for 1973-81 Camaro and 1973-75 Firebird models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the original in...

Product#: *K3033

1976 Firebird, Trans Am; Body Mount Bushing Kit; Subframe and Radiator Support; 12 Piece Set

Reproduction body mount and radiator support bushings for 1976 Pontiac Firebird and Trans Am models. Replacing the original body mount bushings with OER® rubber reproductions is a sure fire way of maintaining originality...

Product#: C2005

1960-81 GM; Body Shim Set; 1/16" Thick, 1-1/4" x 1-1/8"; with 3/8" Bolt Slot; Zinc Plated; 10 Piece Set

Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...

Product#: *K3027

1967-81 Camaro, Firebird, Nova; Subframe Body Mount Hardware Set; Grade 5; Various GM Models

Subframe hardware kit designed for use on various 1967-81 Camaro, Firebird, and 1968-74 Nova, Omega, Apollo, and Ventura models as listed below. Each kit contains all the correct bolts, washers and nuts used to mount the...

Product#: T71220

Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate

Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...

Product#: *K1551

Bolt, 5/16-18 x 3/4" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...

Product#: T71224

1/2"-13 Prevailing Torque Lock Nut; Cadmium Plated

1/2"-13 Prevailing Torque Lock Nut; Grade 8; Cadmuim Plated

Product#: 914802

1967-69; Camaro; Firebird; Nova; Subframe Body Mount Cushion; # 2, # 3 Position; Lower Cushion

Reproduction of the original GM sub frame body mount cushion for 1967-1969 Camaro and Firebird and 1968-72 Nova models. Each body mount is produced using correct compression molded S.B.R. that replicates the original in...

Product#: 3784845

J-Type Clip Nut, Fits 5/16-18 bolts, Black Phosphate Coated

OER® Authorized reproduction J-nut that was used for the installation of many products on the front end of various GM models. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Product#: 356514

1976-81 Firebird; 1975-79 Nova, GM X-Body; Subframe Body Mount Bushing; # 3 Position; Lower Bushing

Reproduction of the original GM sub frame body mount cushion for 1976-81 Firebird and 1975-79 Nova/GM X-Body models. Each body mount is produced using correct compression molded S.B.R. that replicates the original in quality...

Product#: 332609

1973-81 Camaro; 1973-75 Firebird; Subframe Body Mount Bushing; # 3 Position; Upper Bushing

Reproduction of the original GM sub frame body mount for 1973-81 Camaro and 1973-75 Firebird models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the original in...

Product#: 549235

1976-81 Firebird; Trans Am; Subframe Body Mount Bushing; Radiator Support; # 1 Position; Upper Bushing

Reproduction of the original GM sub frame body mount cushion for 1976-81 Firebird models. Each body mount is produced using correct compression molded S.B.R. that replicates the original in quality and fitment. # 1 position,...

Product#: 527847

1976-81 Firebird; Trans Am; Subframe Body Mount Bushing; # 2 Position; Upper Bushing

Reproduction of the original GM sub frame body mount for 1976-81 Firebird models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the original in quality and fitment. # 2...

Product#: C122

1967-74 Camaro, Firebird, Nova, GM X Body; Subframe Body Mount Cage Nut; Each

Reproduction subframe cage nut for various 1967-74 GM models. This body mount cage nut is manufactured from stamped steel and used to fasten the subframe to the body. Replaces torn, rusted, or damaged mounting points on GM...

Product#: C2004

1960-81 GM; Body Mount Shims; 1/8" Thick, 1-1/4" x 1-1/8"; 3/8" Bolt Slot; Zinc Plated; 10 Piece Set

Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...

Product#: C2001

1961-1981 GM; Body Shims; 15/64"; 10 Piece Set

Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...

Product#: *K1550

J-Type Clip Nut Set, Fits 5/16-18 bolts, Black Phosphate Coated, 10 Piece Set

OER® Authorized reproduction J-nut that was used for the installation of many products on the front end of various GM models from 1959-74. The OER® Authorized logo represents products that meet or exceed stringent...