Product#: 153981

1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair

Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....

Product#: 14039016

1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models

Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...

Product#: 14039015

1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models

Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...

Product#: 153980

1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair

Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...

Product#: 154076

1970-81 Camaro, Firebird; Tubular Lower Control Arm Set; Pair

Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...

Product#: 9421430

1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each

OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...

Product#: 154075

1970-81 Camaro, Firebird; Tubular Upper Control Arm Set; Pair

Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...

Product#: 10068783

1970-96 GM Lower Control Arm Bumper, Each, Various Models

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...

Product#: SP94374

1967-69 GM F-Body; 68-74 Nova - Adjustable Lower Control Arms (pair)

These tubular lower control arms are a perfect fit for your 1st or 2nd Generation F-Body vehicle. On 1967-69 Camaro models, these arms lower the front end by 1" and add 1° positive caster for an aggressive, ready-to-run...

Product#: SP97130

1970-81 Camaro/Firebird, 1973-77 Regal Front Adjustable Control Arms add Camber/Caster

SPC Front Upper Adjustable Control Arms design will give you the most adjustability and best clearance of any arm on the market. These adjustable arms come with ball joints that are 1/2? taller than stock to improve camber...

Product#: 11162199

1967 - 1969 Camaro Firebird ; 1968 - 1974 Nova; Control Arms; Stock Style; Front Lower

Tubular control arms add strength, style and improved performanceSelf-lubricating Delrin bushings reduce deflection and suspension bind Increased caster dramatically improves handling and controlAdjustable ride height to...

Product#: UM2031A

1982-92 GM F-Body - Umi Front Tubular Lower A-Arm Set W/ Polyurethane Bushings - Red Powdercoat

These tubular lower A-Arms are shipped fully assembled and ready for installation on your 1982-92 Camaro. Includes greaseable polyurethane bushings, premium ball joints, polyurethane bump stops and adjustable steering stops....

Product#: UM2031B

1982-92 GM F-Body - Umi Front Tubular Lower A-Arm Set W/ Polyurethane Bushings - Black Powdercoat

These tubular lower A-Arms are shipped fully assembled and ready for installation on your 1982-92 Camaro. Includes greaseable polyurethane bushings, premium ball joints, polyurethane bump stops and adjustable steering stops....

Product#: K570461

1967-69 F-Body; 1968-74 Nova/X-Body - Gstreet Upper Control Arms

The gStreet line of front-suspension components is an excellent choice for improving the performance and stance of your classic. Now you can get bolt-on gStreet control arms like the ones on the complete sub-frame by Chris...

Product#: UM2305B

1993-02 GM F-Body - Umi Front Tubular Lower A-Arm Set W/ Polyurethane Bushings - Black Powdercoat

These tubular lower A-Arms are shipped fully assembled and ready for installation on your 1993-02 Camaro. Includes greaseable polyurethane bushings, premium ball joints, polyurethane bump stops and adjustable steering stops....

Product#: UM2310A

1993-02 GM F-Body - Umi Front Upper A-Arms (Adjustable) - Red Powdercoated

UMI's fabricated tubular a-arms provide a rock solid foundation for your 4th Gen's front suspension. Our P/N 2311 a-arms are built to offer increased rigidity, smooth travel and a precise steering feel equaling a great street...

Product#: BX20065A

1993-02 F-Body BMR Adjustable Upper A-Arms - Red

Enhance your handling performance with BMR A-arms. Decrease overall weight and more importantly "unsprung" weight with a set of BMR tubular front a-arms. BMR A-arms feature DOM construction, laser cut mounting plates and CNC...

Product#: BX20065B

1993-02 F-Body BMR Adjustable Upper A-Arms - Black Hammertone

Enhance your handling performance with BMR A-arms. Decrease overall weight and more importantly "unsprung" weight with a set of BMR tubular front a-arms. BMR A-arms feature DOM construction, laser cut mounting plates and CNC...

Product#: UM2311A

1993-02 GM F-Body - Umi Front Upper A-Arms (Non-Adjustable) - Red Powdercoated

UMI's fabricated tubular a-arms provide a rock solid foundation for your 4th Gen's front suspension. Our P/N 2311 a-arms are built to offer increased rigidity, smooth travel and a precise steering feel equaling a great street...

Product#: UM2311B

1993-02 GM F-Body - Umi Front Upper A-Arms (Non-Adjustable) - Black Powdercoated

UMI's fabricated tubular a-arms provide a rock solid foundation for your 4th Gen's front suspension. Our P/N 2311 a-arms are built to offer increased rigidity, smooth travel and a precise steering feel equaling a great street...

Product#: BX20064A

1993-02 F-Body BMR Non-Adjustable Upper A-Arms - Red

Enhance your handling performance with BMR A-arms. Decrease overall weight and more importantly "unsprung" weight with a set of BMR tubular front a-arms. BMR A-arms feature DOM construction, laser cut mounting plates and CNC...

Product#: SP94340

1970-81 GM F-Body; 75-79 Nova, 73-96 Full Size - Adjustable Upper Control Arm

Adjustable upper control arm for 1970-96 Chevrolet and 1970-81 Pontiac models. This rugged control arm offers a wide range of adjustments to meet your exact needs. These arms provide quick and easy compensation for standard...

Product#: AD121

82-02 Adjustable Control Arms

Product#: 501138

1993-2002 Chevrolet Camaro; 1993-2002 Pontiac Firebird; Front Lower Right/Passenger Side; Control Arm

Front Right Lower Control Arm for your 1993-2002 Chevrolet Camaro or 1993-2002 Pontiac Firebird. Produced to meet or exceed factory specifications. {fitment}

Product#: 13158A

1964-74 GM; Upper Control Arm Shaft Kit

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: 13201A

1970-73 Upper Control Arm Shaft Set

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: GW702

1967-69 F-Body, 1968-74 X-Body Billet Shaft, Offset with OE Arms

Offset shafts can take the place of stock shafts. They will allow caster to be added without losing proper camber settings. For performance alignments and/or the addition of tubular a-arms these are a must to achieve the...

Product#: GW705

70-81 F-Body, 1975-79 X-Body Billet Shaft, Offset with OE Arms

Offset shafts can take the place of stock shafts. They will allow caster to be added without losing proper camber settings. For performance alignments and/or the addition of tubular a-arms these are a must to achieve the...

Product#: 501136

1993-2002 Chevrolet Camaro; 1993-2002 Pontiac Firebird; Front Upper Right/Passenger Side; Control Arm

Front Right Upper Control Arm for your 1993-2002 Chevrolet Camaro or 1993-2002 Pontiac Firebird. Produced to meet or exceed factory specifications. {fitment}

Product#: 501137

1993-2002 Chevrolet Camaro; 1993-2002 Pontiac Firebird; Front Upper Left/Driver Side; Control Arm

Front Left Upper Control Arm for your 1993-2002 Chevrolet Camaro or 1993-2002 Pontiac Firebird. Produced to meet or exceed factory specifications. {fitment}

Product#: GW709

1967-69 F-Body & 1968-74 X-Body Billet Shaft, Standard with OE or Tubular Arms

Standard non-offset shafts are highly recommended if you are using performance Del-A-Lum or polyurethane bushings. The shafts are made to accomidate 5/8" fine threaded locking nuts rather than a factory shaft that uses a 3/8"...

Product#: 39102G

1971-03 GM Passenger Car / Truck Polyurethane Upper Control Arm Bumpers; Black

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: SP94304

1970-81 GM F-body - Adjustable Control Arm Spacer Set

Adjustable control arm spacer sets for 1967-81 Camaro models. Ball Joint Spacers raise the arm to improve frame clearance. Three 1/4" spacers and hardware.

Product#: 39102R

1971-03 GM Passenger Car / Truck Polyurethane Upper Control Arm Bumpers; Red

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: UM3011

1982-92 GM F-Body - Front Lower Control Arm Hardware Kit

Front lower A-Arm hardware kit includes Grade 10.9 12mm bolts, washers and nylon lock nuts. Kit includes everything needed to mount your new UMI Performance control arms to your vehicle. Sold as a kit. Made in the USA.

Product#: SP94378

1970-96 GM; Adjustable Lower Control Arms; Pair

These tubular lower control arms are a perfect fit for the various General Motors models listed including your 2nd Generation Camaro or Firebird models. On 1970-81 Camaro models, they add 2.5° positive caster and may be...

Product#: SP97120

1967-69 Camaro/Firebird 1968-74 Nova Front Adjustable Control Arms add Camber/Caster

SPC Front Upper Adjustable Control Arms design will give you the most adjustability and best clearance of any arm on the market. These adjustable arms come with ball joints that are 1/2? taller than stock to improve camber...

Product#: 11172199

1970-81 Camaro Firebird ; Control Arms; Stock Style; Front Lower

Tubular control arms add strength, style and improved performanceSelf-lubricating Delrin bushings reduce deflection and suspension bind Increased caster dramatically improves handling and controlAdjustable ride height to...

Product#: K570562

1970-81 F-Body; 1975-79 Nova/X-Body - Gstreet Lower Control Arms

The gStreet line of front-suspension components is an excellent choice for improving the performance and stance of your classic. Now you can get bolt-on gStreet control arms like the ones on the complete sub-frame by Chris...

Product#: K570561

1967-69 F-Body; 1968-74 Nova/X-Body - Gstreet Lower Control Arms

The gStreet line of front-suspension components is an excellent choice for improving the performance and stance of your classic. Now you can get bolt-on gStreet control arms like the ones on the complete sub-frame by Chris...

Product#: K570462

1970-81 F-Body; 1975-79 Nova/X-Body - Gstreet Upper Control Arms

The gStreet line of front-suspension components is an excellent choice for improving the performance and stance of your classic. Now you can get bolt-on gStreet control arms like the ones on the complete sub-frame by Chris...

Product#: UM2305A

1993-02 GM F-Body - Umi Front Tubular Lower A-Arm Set W/ Polyurethane Bushings - Red Powdercoat

These tubular lower A-Arms are shipped fully assembled and ready for installation on your 1993-02 Camaro. Includes greaseable polyurethane bushings, premium ball joints, polyurethane bump stops and adjustable steering stops....

Product#: BX20062B

1982-92 Camaro / Firebird BMR Lower Control Arms with Spring Pocket and Black Hammertone Finish

Enhance your handling performance with BMR Suspension control arms, which decrease unsprung weight and enhance handling. Fabricated from heavy-duty 1.5", 0.095" wall and 1.25", 0.095" wall DOM tubing. Each arm comes...

Product#: UM2310B

1993-02 GM F-Body - Umi Front Upper A-Arms (Adjustable) - Black Powdercoated

UMI's fabricated tubular a-arms provide a rock solid foundation for your 4th Gen's front suspension. Our P/N 2311 a-arms are built to offer increased rigidity, smooth travel and a precise steering feel equaling a great street...

Product#: RK10021U

1970-81 Camaro / Firebird; Rekudo; Control Arms; Front; Upper

The Rekudo Upper control arms are one part of a fully engineered suspension system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern suspension system that retains...

Product#: RK10021L

1970-81 Camaro / Firebird; Rekudo; Control Arms; Front; Lower

The 1970-81 Camaro and Firebird Rekudo lower control arms are one part of a fully engineered suspension system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern...

Product#: SP94305

1967-69 GM F-Body; 68-74 Nova - Adjustable Upper Control Arm

Adjustable upper control arm for 1967-69 Camaro models. This rugged control arm offers a wide range of adjustments to meet your exact needs. These arms provide quick and easy compensation for standard or lowered ride heights....

Product#: E7720203

1970-81 F-BODY Bolt-In Stock Spring Adapter for P/N E52420 Lower Control Arms

Bolt-in Adapter for stock springs for part number E52420 Lower control arms for 1970-81 Camaro models using factory springs instead of coil-overs. Include 2 Bolt-In Spring Adapters and hardware.

Product#: 501139

1993-2002 Chevrolet Camaro; 1993-2002 Pontiac Firebird; Front Lower Left/Driver Side; Control Arm

Front Left Lower Control Arm for your 1993-2002 Chevrolet Camaro or 1993-2002 Pontiac Firebird. Produced to meet or exceed factory specifications. {fitment}

Product#: GW715

1970-81 F-Body, 1975-79 X-Body Billet Shaft Standard with OE or Tubular Arms

Standard non-offset shafts are highly recommended if you are using performance Del-A-Lum or polyurethane bushings. The shafts are made to accomidate 5/8" fine threaded locking nuts rather than a factory shaft that uses a 3/8"...

Product#: 13200A

1974-79 Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac; Upper Control Arm Shaft Set; MS50922

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: 384220

1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each

Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...

Product#: 12237

1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each

Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...

Product#: 748689

1964-75 Camaro, Chevelle, Firebird, GTO; Upper A-Arm Bolt and Nut Set; 8 Piece Set

Reproduction of the upper control arm cross shaft bolt set used to retain the shaft to the frame mounting ears on various GM vehicles. The grade 8 ratings nuts & bolts are made from high strength steel which as been formed...

Product#: 99154G

1955-72 GM; Lower Control Arm Bumpers; Polyurethane; Black; Pair

Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...

Product#: 12651

1993-02 Camaro/Firebird; Upper Control Arm Bushing; Pair

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: 12355

1978-98 GM Cars & Trucks; Lower Control Arm Bushing; (Toward Front of Car)

Reproduction control arm bushing for the front position in the lower control arm on various Gm vehicles as listed. Rubber bushing is encased in steel sleeve as original. Sold individually. Specifications Material: Steel Clad...

Product#: 12413

1982-92 Camaro/Firebird; Control Arm Bushing; Lower; Rear

Reproduction control arm bushing for the rear position in the lower control arm of you 1982-92 Camaro or Firebird. Rubber bushing is encased in steel sleeve as original. Sold individually. {fitment}

Product#: 12162

1955-74 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bushing; Each; Various Models

1958-1970 Chevrolet Biscayne 1958-1970 Chevrolet Bel Air 1966-1970 Chevrolet Caprice 1970-1972 Chevrolet Monte Carlo 1968-1968 Chevrolet Chevy II 1968-1974 Chevrolet Nova 1955-1957 Chevrolet Bel Air 1955-1957 Chevrolet One...

Product#: 12258

1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each

Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...