Product#: 1253580

1960-77 GM, Chrysler, Dodge, Plymouth; Power Steering Fitting; with Saginaw PS Pump; Cad Plated; Various Models

Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...

Product#: 548375

Power Steering Pump or Smog Pump Bracket Spacer; 3/4" O.D. x 3/8" wide

This spacer is used between the power steering pump and mounting bracket or the smog pump and the mounting bracket on various GM models. Use as required. 3/8" width 27/64" inside dia 3/4" outside dia

Product#: 1253532

1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style

Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...

Product#: 1253531

1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style

Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...

Product#: LA50205

1977-96 Impala/Full-Size; 77-92 GM F-Body; 77-79 Nova - Steering Coupler

This reproduction steering coupling joint is required to connect the steering column box to the steering column. Coupler Specifications: Shaft type: 3/4" coarse spline w/ flat at bolt head side Spline Count: 30 Total OD:...

Product#: A8500127

1967-69 GM F-Body & 1968-74 X-Body; Power Steering Return Hose Factory Inspection Stamp; G-23A

During assembly, workers identified correct hoses for placement by the stamp marks on them. This stamp was an identification and date code used on power steering return hoses approximately every three inches. Get an original...

Product#: A8500124

1967-79 Pontiac Engine; Power Steering Pump Rear Stud/Hardware

This power steering pump stud installs on the rear of the pump for attachment to the rear bracket on the block. The stud is available separately or as a set including a flat washer, cup washer, and correct style slot nut.

Product#: A8500123

1967-70 Pontiac Engine; Power Steering/Alternator Mounting Hardware

This set contains the correct hardware to mount the power steering pump and alternator on 1967-70 Pontiac engines. Each set has the correct style fasteners with factory markings and finishes for an authentic restoration....

Product#: MP645

March Performance Self Locking Chrome Power Steering Pulley Nut 9/16"-18 Thread

This chrome plated self-locking nut is designed for aluminum performance power steering pulleys. It can also be used with OE and aftermarket pulleys on Saginaw power steering pumps with a 9/16"-18 threaded shaft. Made in USA

Product#: 1253513

1964-77 GM; Tie Rod End/Spindle Nut Set

This hardware set contains the 20 steering nuts necessary to mount the spindle to the control arms, the tie rod ends to the center link and secure the steering arms.

Product#: A8500126

1967-75 Pontiac Engine; Power Steering Pump Spacers

These are the correct size spacers that install between the power steering pump and front mounting bracket which is bolted to the pump. Sold in pairs.

Product#: A8500125

1967-79 Pontiac Engine; Power Steering Pump Rear Stud

This power steering pump stud installs on the rear of the pump for attachment to the rear bracket on the block. The stud is available separately or as a set including a flat washer, cup washer, and correct style slot nut.

Product#: 1253550

1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft

This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...

Product#: A15650

5/16"-24 Grade 8 Hex Nut Zinc; Each

5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...

Product#: 1253511

1964-79 GM; Pitman Arm Nut/Washer Set

Reproduction gear box steering arm large nut and lock washer set. This nut and washer mount the steering pitman arm to the manual or power steering gear box. Applications: 1967-72 Camaro 1967-72 Firebird 1964- 72 Impala /...

Product#: 3967424

Power Steering Pump Spacer

Correct spacer which keeps the power steering pump from making contact with the front support.

Product#: PS20038F

3/8" Magna-Pure Power Steering Filter

In-line Magna-Pure Filter - Serviceable Magnetic filter element with patented built in bypass for optimal performance; filters up to 190 micron particles. Protects the entire steering system from contmination. Flushing the...

Product#: G7072

1964-96 Lash Adjustor Nut

GM service replacement part of the original lash adjuster. 7/16"-20 thread. Applications: 1967-74 Camaro with power steering 1977-86 Camaro with power steering 1967-74 Firebird with power steering 19 77-86 Firebird with power...

Product#: 1253572

1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN

This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....

Product#: 1253574

1962-02 GM, Chrysler Dodge, Plymouth; Saginaw Power Steering Pump Stud And Bolt Kit; with Chrome Plated Bolts

This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...