Product#: *881316

1970-73, 1977-81 Camaro/Firebird Front Brake Hose Bracket Set

Reproduction front brake hose bracket set designed specifically for 1970-73 or 1977-81 models. Features hexagon-shaped holes to perfectly fit the 1970-73 or 1977-81 style brake hoses. Reproduced to exact specifications, this...

Product#: 6264042

1974-76 Camaro, Firebird; Front Brake Hose Bracket; RH; Passenger Side

Reproduction passenger side front brake hose bracket designed specifically for 1974-76 models. Features keyway style holes to perfectly fit the 1974-76 style brake hoses. Reproduced to exact specifications, this bracket...

Product#: 6264041

1974-76 Camaro, Firebird; Front Brake Hose Bracket; LH; Driver Side

Reproduction drivers side front brake hose bracket designed specifically for 1974-76 models. Features keyway style holes to perfectly fit the 1974-76 style brake hoses. Reproduced to exact specifications, this bracket...

Product#: 3975500

1970-73, 1977-81 Camaro, Firebird; Front Brake Hose Bracket; RH Passenger Side

Reproduction passenger side front brake hose bracket designed for use on 1970-73 and 1977-81 Camaro and Firebird models. Reproduced to exact specifications with original markings, this bracket attaches to the frame rail and...

Product#: HC65

1969 Camaro / Firebird; 1969-74 Nova; Front Disc; Brake Hose Bracket Set

Reproduction of the original disc brake hose to upper frame edge mounting brackets. This unique three piece bracket set was originally used on vehicles with factory installed disc brakes. Excellent for use when converting...

Product#: 14302

1967-68 Camaro / Firebird Rear Brake Hose Bracket

Reproduction of the bracket that mounts on the body and retains the brake hose where it attaches to the steel brake line on 1967-68 models.

Product#: HC66

1967-68 Chevrolet Camaro/Pontiac Firebird; Disc Brake Caliper Hose Brackets

Excellent reproduction of the 1967-68 disc brake steel line to hose small caliper mounting brackets. These brackets were essential in holding the steel brake inlet lines in place preventing possible damage that might occur...

Product#: A9500676

1970-73 Chevrolet Camaro/Pontiac Firebird; Rear Brake Hose Bracket

This bracket is for 1970-73 models. Hose bracket is used for supporting the rear brake hose and brake line connection at the body.

Product#: A9500677

1974-81 Chevrolet Camaro/Pontiac Firebird; Rear Brake Hose Bracket

This bracket is for 1974-81 models. Hose bracket is used for supporting the rear brake hose and brake line connection at the body.

Product#: 393737

4 Piece Brake Line Brackets Set

This bracket and clip set will mount rubber, nylon or stainless steel lines to the suspension or frame. Bolt-on or weld-on for easy installation.

Product#: 14304

1969 Camaro,1969-72 Nova; Rear Brake Hose Bracket

Reproduction of the original rear brake hose bracket for use with 1969 Camaro and 1969-72 Nova models. This is the bracket that retains the brake hose where it attaches to the steel brake line. This bracket is correct in...

Product#: 14303

1969 Camaro, Firebird; Front Drum Brake Hose Brackets; Pair

Reproduction of the original front drum brake hose brackets for use with 1969 Camaro and Firebird models. These brackets are manufactured in stamped steel to the correct factory configuration for an authentic appearance and...

Product#: HC28

1968-72 GM; 12-Bolt Rear Axle Brake Hose Bracket

Reproduction bracket used to hold the rear brake hose to the rear axle housing. This bracket is often broken off or discarded when changing rear axle assembly. {fitment}

Product#: 3975499

1970-73, 1977-81 Camaro, Firebird; Front Brake Hose Bracket; LH Drivers Side

Reproduction driver side front brake hose bracket designed for use on 1970-73 and 1977-81 models. Reproduced to exact specifications with original markings, this bracket attaches to the frame rail and the brake hose passes...

Product#: PVB71

1967-72 GM Disc Brake Combination Valve Mount Bracket

If you are installing a brake combination valve in your 1967-71 , or need a replacement bracket for a 1971-72, this carefully machined bracket will mount the brake combination valve to the master cylinder. Note: This is only...

Product#: RE005

1971-81 GM; Proportioning Valve Bracket

Reproduction proportioning valve bracket for use on 1971-81 models when converting from drum to disc brakes to mount the valve into the correct location, and can also be used on 1970 models converting from a 3-piece valve to...

Product#: B10415

5/16-18 X 9/16" Self-Tapping Bolt, Front Disc hose bracket - 1969-75 Camaro/Firebird

This is the self-tapping bolt for 1969-75 F-Body front disc brake hose frame bracket. requires two each.

Product#: 153653A

Proportioning Valve Bracket; LH Mount; Zinc Plated; Universal Fit

Universal fit bracket to mount the proportioning valve on the LH side of the master cylinder towards the driver side fender. Will fit most aftermarket 7-11" boosters with a GM style master cylinder. Mounting hardware is...

Product#: 6801276

Baer Brakes Black Anodized Adjustable Proportioning Valve with Bracket

Baer Brakes billet adjustable proportioning valve and bracket is machined to fit the bottom of a Baer Remaster master cylinder assembly. Includes: Adjustable Proportioning Valve Fittings Mounting Bracket Mounting Hardware...

Product#: PV01

Proportioning Valve Bracket with Correctly Bent Lines and Fittings (LH Mount)

Proportioning valve bracket with correctly bent lines with fittings.