Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...

Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...

Product#: 17779KC

1992-98 Ford F-Series Pickup, Bronco; Front Bumper Stone Deflector; Upper; Heavy Gauge; Chrome

Reproduction upper front stone deflector for 1992-98 Ford Pickup, and 1992-96 Bronco models. Stone deflectors are manufactured in heavy gauge stamped steel to factory specifications replicating the original in quality and...

Product#: A3102

1938-91 GM; 1948-79 Ford; Bumper Bolt & Nut; Stainless Steel Capped; 1/2"-13 x 1-1/2"; Low Dome; Various Models

Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...

Product#: 17758C

Bumper Bolt With Nut; Zinc Plated; With Stainless Steel Cap; 7/16-14 X 1-1/4"; 8 Bolt Set With Nuts

Reproduction of the original zinc-plated bumper bolt with a polished stainless steel capped head for a variety of Ford and Mercury applications including 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury Comet...

Product#: TR13585A

1966-1977 Ford Bronco License Plate Bracket, Stainless Steel

Reproduction stamped stainless steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate....

Product#: TR17758B

3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25

Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...

Product#: A15043

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...

Product#: 8557

Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut

Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...

Product#: TF400727

Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...

Product#: HK13

1964-70 Ford Mustang; 1966-77 Bronco; Bumper Bolt Mounting Kit; Front & Rear; 28 Pieces

Reproduction bumper bolt mounting kit for 1964-70 Mustangs. Each kit contains enough mounting hardware to mount both front and rear bumpers to the bumper brackets. This 28 piece set includes 8 large bumper bolts, 8 large...

Product#: 17779K

1992-98 Ford F-Series Pickup, Bronco; Front Bumper Stone Deflector; Upper; Heavy Gauge; Paintable

Reproduction upper front stone deflector for 1992-98 Ford Pickup, and 1992-96 Bronco models. Stone deflectors are manufactured in heavy gauge stamped steel to factory specifications replicating the original in quality and...

Product#: *C15323

Plastic Retainer Set; Push-In Type; 1" Head Diameter; For 1/2" Hole; GM # 473798, 5930892, 5973400; Clear; 25 Pieces

Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...

Product#: K49007

License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear

Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...

Product#: 153999B

1981-87 Buick Regal; Rear License Plate Bracket; also Universal Fit for Trucks and Street Rods with Custom Roll Pans

License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...

Product#: K49067

License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)

Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...

Product#: TR13585B

1966-1977 Ford Bronco; License Plate Bracket, Black

Reproduction stamped steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate. The...

Product#: *C15322

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....

Product#: MN1709

7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head

This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...

Product#: A8623

7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish

7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.