Product#: 14342

1968-72 Chevy II, Nova; Shifter Stabilizer Rod Assembly

Quality reproduction of the original shifter stabilizer rod assembly for use with 1968-72 Chevy II and Nova models. Manufactured to original GM specifications, this stabilizer rod goes from the shifter assembly to the...

Product#: 3866568

1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length

This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...

Product#: 3737834R

Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions

Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...

Product#: 3914896

1967-69 Camaro Big Block, 1968-72 Chevy II / Nova Big Block Clutch Fork Return Spring

OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 5-1/8" O.L. 2-3/4" spring portion. You are assured that every OER® part offe red is...

Product#: 3912606

1967-72 Clutch Fork Return Spring Extension Bracket ; Big Block

OER® reproduction of the original clutch fork return spring bracket installed on various GM models with a factory installed big block engine. Allows correct function and mounting of the clutch fork return spring....

Product#: CP2497Z

1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield

Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...

Product#: 3737834

Hurst; Competition Plus 4-Speed Shifter Installation Kit; 1955-57 Chevrolet Car And Many Other GM Applications With A 1969-74 Muncie M20/M21/M22 (452/453) Transmission

Hurst installation kit required to fit a Competition Plus Shifter on 1969-70 Chevy Novas equipped with Muncie 452 or 453 transmissions. It will work with or without the factory console. Fitment Note: Can be used for custom...

Product#: KW914A

1969 Camaro, 1969-72 Nova; Lock Out Linkage Set; Small Block; 4 Speed

Reproduction of the original interlock linkage set designed for use with 1969 Camaro and 1969-72 Nova models with Muncie 4-speed small block engines. Each linkage set features original factory stampings for authenticity....

Product#: KW914B

1969 Camaro, 1969-72 Nova; Lock Out Linkage Set; Big Block; 4 Speed;

Reproduction of the original interlock linkage set designed for use with 1969 Camaro and 1969-72 Nova models with Muncie 4-speed big block (396) engines. Each linkage set features original factory stampings for authenticity....

Product#: K578

1969 Camaro, 1968-69 Chevy II Nova; Universal Reverse Lock Out Assembly; Muncie; 4-Speed

Reproduction of the original reverse lock out assembly designed for use with 1968-69 Chevy II, Nova, and 1969 Camaro models with Muncie 4/speed, big or small block engines. When installing a factory 4 speed, or converting a...

Product#: K306

1969 Camaro, Nova; Muncie Reverse Lock Out Rod; 4/Speed; Small Block

Reproduction of the original lower reverse lock out rod designed for use with 1969 Camaro and Nova models with Muncie 4/speed, small block engines. This rod is used to prevent the key from being removed from the ignition...

Product#: KW912

1969 Camaro; Lower Reverse Lock Out Rod; Big Block 396, 427

Quality reproduction of the original forged Big block 4 speed lock out rod designed for use with 1969 Camaro 396/427 (big block) 4 speed models. Correct length and offset Interlock lock out rod from frame bellcrank to...

Product#: KW911

1969 Camaro, Nova; Upper Reverse Lock Out Rod

Quality reproduction of original upper reverse lock out rod designed for use with 1969 Camaro and Nova 3 and 4 speed manual transmissions. Manufactured in quality stamped steel to factory specifications. This is the correct...

Product#: 3899021

1967-72 Small Block Clutch Fork Return Spring

OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 3-5/8" O.L. 2-1/2" spring portion. Applacations: 1967-69 Camaro small block 1967-69 Firebird...

Product#: 3899022

1967-75 Return Spring Extension Rod

Correct reproduction of the original return spring extension rod designed for use on various GM models as listed. This rod is used in conjuntion with the clutch fork return spring. Together they connect the clutch fork to the...

Product#: 382104K

1938-91 Buick, Chevrolet, GMC, Oldsmobile, Pontiac; Swivel Assembly; for Shift Control Linkage and 1969 Reverse Lockout; 3/8"-16 Thread; 1-1/2" Long; With One 3/8" Hole

Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...

Product#: 3738616

Hurst; Street Supershifter 4-Speed Installation Kit; For Muncie, T10, & Super T-10 Transmissions

Hurst Competition Plus Super Shifter installation kit for various GM models equipped with Muncie or T10 transmissions. Includes all the linkage, brackets, and hardware necessary to install a Hurst Super Shifter onto the...

Product#: KD2400

TH-400 Electric Kickdown With Billet Box - Stainless Steel Cable Housing

Lokar's TH400 Electric Kickdown is cable-operated and the electric switch is housed in a billet aluminum box that mounts with transmission pan bolts. Includes U-Cut-to-Fit stainless steel outer cable housing designed with a...

Product#: KD2401

TH-400 Electric Kickdown with Black Billet Box and Black Nylon Cable Housing

Lokar's TH400 Electric Kickdown is cable-operated and the electric switch is housed in a billet aluminum box that mounts with transmission pan bolts. Includes U-Cut-to-Fit stainless steel outer cable housing designed with a...

Product#: 3886686

1967-74 Upper Clutch Push Rod Boot - Various Models

This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...