Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...

Product#: K912

1967-2004 Buick, Chevy, Pontiac, Olds; Accelerator Pedal Pad Trim Plate; Stainless Steel; Various Models

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....

Product#: FM6098

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: FM6097

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Ball Milled Finish

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: GPS6014

Lokar Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: S8520

Barefoot Gas Pedal Pad; Chrome With Black Powder Coated Inlay

Stomp on it in true retro style with this groovy barefoot accelerator pedal cover. This far out pedal cover takes you back to the sixties every time you drive your classic. Chrome cover mounts over your existing accelerator...

Product#: GPS6016

Lokar Brushed Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: GPS6015

Lokar Chrome Steel 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: GPS6014B

Lokar Black Anodized Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: 368078

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Mounting Pin; Various Car & Truck Models

This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...

Product#: *R5003

1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....

Product#: P146

1967-69 F-Body; 68-74 Nova with Auto Trans Billet Throttle Assembly & Pedal Cover - Black Anodized

Manufactured from solid billet aluminum, this black anodized custom pedal assembly set includes a throttle pedal assembly paired with a matching brake pedal cover. The billet throttle pedal assembly is fully adjustable,...

Product#: FM6099

Lokar Eliminator Black Anodized Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: DBW6200A

Lokar CTS-V Drive-By-Wire Pedal Pad - Brushed w/Rubber Inserts

Billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved pedal pad...

Product#: DBW6200B

Lokar CTS-V Black Anodized Billet Accelerator Pedal

Direct-fit billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved...

Product#: P135

1967-69 GM F-Body; 68-74 Nova W/ AT - Billet Pedal Covers - Black Anodized Finish

Designed to match billet throttle assemblies for 1967-81 Camaro and 1968-74 Nova. Pedal covers feature an anodized finish with matching highlights. No drilling is required. Made in USA

Product#: P137

1967-69 GM F-Body; 68-74 Nova W/ MT - Billet Pedal Cover - Black Anodized Finish

Designed to match billet throttle assemblies for 1967-81 Camaro and 1968-74 Nova. Pedal covers feature an anodized finish with matching highlights. No drilling is required. Made in USA Sold individually.

Product#: NV85103

1968-69 Chevelle, 68-69 El Camino, 68 Impala, Caprice, 68-72 Nova; Dash Mounted Clock Wiring Harness

A correct reproduction of the original clock harness for use with 1968-69 Chevelle, El Camino, 1968 Impala, Bel Air, Biscayne, Caprice,and 1968-72 Chevy II, Nova models. May be installed when replacing original wiring or when...

Product#: P147

1967-69 F-Body; 68-74 Nova Manual Trans Billet Throttle Assembly w/Pedal Covers - Black Anodized

Manufactured from solid billet aluminum, this black anodized custom pedal assembly set includes a complete throttle pedal assembly paired with a matching brake and clutch pedal cover. The billet throttle pedal assembly is...

Product#: BFG6012

Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...