Product#: 14314

1969-75 Chevrolet; Smog Pump Bracket; Small Block

Reproduction of the original smog pump bracket for use with various 1969-75 Chevrolet models with small block engines. Each breacket is manufactured in stamped steel to correct factory dimensions replicating the original in...

Product#: 14674

1969-76 Chevrolet; Smog Diverter Elbow; Various Models

Reproduction of the original smog diverter elbow designed for use with various 1969-76 Chevrolet models as listed. This OEM style aluminum elbow bolts to the smog pump and the diverter valve mounts on the opposite side. Used...

Product#: 6484242

1968-76 Buick, Chevrolet, Oldsmobile; Air Cleaner Thermal Intake Vacuum Sensor

Reproduction air cleaner sensor for various 1968-76 Buick, Chevrolet, Pontiac and Oldsmobile models. Replaces OE part number # 6482242. Vacuum Sensonr used on 1969 Pontiac Firebird and 1969-1970 Pontiac GTO Ram Air III and...

Product#: E1476

Egr Adapter

Edelbrock EGR Adapter # 1476 has made installing your new intake and carburetor easier when using Part # 3701 and # 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your...

Product#: K0138

1969 Camaro, Impala, Nova, Chevy Truck; Smog Hose Set; with Clamps; Big Block

Reproduction of the original smog hoses designed for use with 1969 Chevrolet 396, 427, 454 big block models. This set features all the correct lengths of thick walled hoses to replace missing or cracked originals. Each hose...

Product#: SPE9774

Spectre 9774; Performance Mass Air Flow Couplers

This kit comes with one 3.625 in. to 4.000 in. and two 3.875 in. to 4.000 in. reducers. It adapts most boot-in style GM mass airflow sensors to a 4.000 in. intake system.

Product#: 12562568

1966-2001 Buick, Chevy, Pontiac, Olds; Smog Pump Check Valve: with 3/4" OD Hose

Reproduction of the original smog pump check valve designed for use with various 1966-2001 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. This reproduction is designed to replace the existing valve and...

Product#: G6991

1971-77, 1982 & 1994-95 Fuel Charcoal Canister - For Use With 2 Port

Original GM fuel vapor charcoal canister used to help cut down or eliminate fuel vapors. Essential part of the fuel and emissions system. Camaro Applications: 1974-77 350 1976-77 305 1982 2.5-2 Firebird Applications: 1971 all...

Product#: K0184

1969-81 Camaro; Nova; Smog Pump Pulley; Single Deep Grove; Small Block, Big Block

Reproduction of the original deep groove A.I.R. (air injection reactor) smog pump pulley designed for use with for high performance small block, and big block (396/375hp) models. Each pulley is manufactured to correct factory...

Product#: K0158

1970 Camaro, Big Block Smog Hose Set

Reproduction of the original style smog hoses and clamps designed for use with various 1970 Chevrolet models with 396, 402, 427 big block engines. Includes correct white stripe hoses same as original, black hose tie, and 4...

Product#: 09033

K&N; Neoprene Gasket for Mass Air Flow

Mass air flow gasket for GM Vehicles. K & N part # 09033

Product#: K1132

1969-74 Camaro, Impala, Nova; Smog Pump Pulley; Single Deep Groove; Hi Po 302, 350, 396, 427, 454

Quality reproduction of the original single, deep groove A.I.R. (air injection reactor) smog pump pulley designed for use with various 1969-74 Chevrolet models as listed below. This version is specifically designed for 302,...

Product#: E251

1967-78 Camaro, Impala, Nova, Chevy/GMC Truck; Smog Tube Extension; Small Block

Reproduction A.I.R. smog tube extension tube for 1967-78 GM models as listed. Each extension is manufactured to factory specifications. Designed to fit in the exhaust manifold port under the main A.I.R. (smog) assembly....

Product#: 60406

Painless Oxygen Sensor Bung Fitting

Direct weld-in oxygen sensor fitting for all fuel injection systems. Fits TBI, TPI, CMFI, LT1, LSX, 5.0L and most other oxygen sensors. {specs}

Product#: EMP330

Exhaust Manifold Smog Tube Eliminator - 1/2"-20

Correct block-off plug used when converting currently produced exhaust manifolds with holes for smog tubes back to pre-smog usage. Each 8 cylinder manifold requires 4 plugs per side.

Product#: R34751

1969-73 Camaro, Impala, Nova, Truck; Smog Tubes; Small Block; without AC; Pair

Reproduction of the original style smog tubes designed for use with 1969-73 Camaro small block models. Each tube is manufactured to correct factory specifications replicating the original design, appearance, and fitment....

Product#: R34752

1969-74 Camaro, Impala, Nova, Truck; Smog Tubes; 396 Big Block without AC; Pair

Reproduction of the original style smog tubes designed for use with 1969-74 Camaro Big block models. Each tube is manufactured to correct factory specifications replicating the original design, appearance, and fitment. These...

Product#: G9110

A.I.R. And EGR Vacuum Hose; 5/32" ID; 2 Foot Length

Original A.I.R. or EGR vacuum hose which can be purchased in a 2 foot length. The dimensions are 5/32 I.D. hose x 24 inches.

Product#: SH69

1969-70 Camaro, Impala, Nova; Smog Hose Set with Clamps; Small Block

Reproduction of the original style smog hoses and clamps designed for use with 1969-70 Chevrolet models with small block engines as listed. Includes correct white stripe hoses. black hose tie, and 4 correct tower clamps for...

Product#: 174011

LS1/LS2 Black Hardcoat Finish Vintage Air Front Runner Drive Set (Power Steering with Pump)

This Vintage Air Front Runner™ Drive system for GM LS1 and LS2 engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...