Product#: A8500301

1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"

Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....

Product#: FSB909

1958-64 Impala, Bel Air, Biscayne; Front Sway Bar" 1" Diameter

Front sway bar kit for 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. This sway bar kir is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and...

Product#: RSB501

1958-64 Impala, Bel Air, Biscayne; Rear Sway Bar Kit; 1" Diameter

These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. These offer all of the above without affecting your ride quality. Kit...

Product#: 18064

1954-05 Front Sway Bar End Link; LH or RH Side; 2 Required

Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle. {fitment}

Product#: A8500300

1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6

Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...

Product#: 14073310

1958-88 Various GM Vehicles Chevelle, Skylark, Cutlass, GTO; Front Sway Bar; Heavy Duty Bracket; WS6

New reproduction of the OEM 1964-88 GM heavy duty front sway bar bracket for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models. See vehicle fitment fort all...

Product#: 18203

1970-05 Buick, Chevrolet, Oldsmobile, Pontiac; Front Sway Bar End Link; 2" Spacer; LH or RH; 2 Required

Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle. Has 2" Spacer {fitment}

Product#: SU0078Z

1958-13 Various GM Vehicles Including Chevelle, Skylark, Cutlass, GTO; Front Sway Bar/Stabilizer Bar; Bushing WS6; 7/8"

New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...

Product#: SU2266Z

1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"

New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...

Product#: SU1316Z

1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"

New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....

Product#: SU1516Z

1960-96 Various GM Vehicles Camaro, Impala, Cutlass, Monts Carlo; Front Sway/Stabilizer Bar; Bushing WS6; 15/16"

New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....

Product#: 18060

1968-2005 GM; Sway Bar End Link; Original Style; with Hardware; Rubber; 2-1/2" Spacer; LH or RH Side; 2 Required

Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...

Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember

Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...

Product#: 406887

1973-91 Buick, Chevy, GMC, Olds, Pontiac; Sway Bar Bracket; Each; Various Models

OER® reproduction of the original style "U" shaped sway bar bushing clamp designed for use with the various GM models listed below. This bracket is manufactured from stamped steel and used to hold the inner sway bar...

Product#: *FSB911A

Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH

This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...

Product#: FSB911

Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH

This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...

Product#: SU0001Z

1958-13 Various GM Vehicles Including Chevelle, Skylark, Cutlass, GTO; Front Sway Bar/Stabilizer Bar; Bushing WS6; 7/8"

New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...

Product#: SU0118Z

1958-13 Various GM Vehicles Including Chevelle, Cutlass, Skylark, GTO; Front Sway Bar/Stabilizer Bar; Bushing WS6; 1-1/8"

New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 1-1/8" diameter...

Product#: 52851

1971-96 Impala; Caprice; Bel Air Biscayne; QA1 Rear Sway Bar Kit; 1-1/4" Diameter

QA1's rear sway bar will give your 1971-96 Impala or Caprice the stability it needs to keep the tires planted on the road. They are an easy bolt-on upgrade to reduce body roll and improve cornering. Sway bars are specifically...

Product#: 11289100

1965-70 Impala/full size MuscleBar with PosiLinks - Front - for use with RideTech lower arms

These RideTech MUSCLEbar sway bars will greatly enhance the cornering performance of your vehicle. They feature increased bar diameters, polyurethane bushings, and appropriate attachment links to make installation easy. The...