Product#: 14039016

1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models

Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...

Product#: 14039015

1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models

Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...

Product#: *K45303

1969-70 Impala, Bel Air, Biscayne, Caprice; Front End Suspension Rebuild Kit

1969-70 Chevrolet Impala front end rebuild kit providing nearly everything required to restore a worn out suspension system to smooth, reliable performance. This comprehensive kit includes the essential components needed to...

Product#: 153951

1958-64 Impala; Lower Control Arms; Rubber Bushings; Pair

New stock style lower control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...

Product#: 153638

1958-64 Impala, Bel Air, Biscayne; Front Disc Brake Spindles; 2" Drop; Pair

These 2 inch drop spindles are engineered for lowering your disc brake converted vintage Chevy a full 2 inches while maintaining proper steering geometry and smooth suspension operation. Precision cast from high quality...

Product#: *K45301

1958-62 Impala, Bel Air, Biscayne; Front End Suspension Rebuild Kit

1958-62 Chevrolet Impala front end rebuild kit providing nearly everything required to restore a worn out suspension to smooth, dependable performance. This comprehensive assortment of components is engineered to replace aged...

Product#: *K45302

1965-68 Impala, Bel Air, Biscayne, Caprice; Front End Suspension Rebuild Kit

1965-68 Chevrolet Impala front end rebuild kit offering nearly everything required to restore a worn out suspension system. This comprehensive assortment of components is engineered to renew aged factory parts, improving ride...

Product#: *K45304

1971-72 Impala, Bel Air, Biscayne, Caprice; Front End Suspension Rebuild Kit

1971-72 Chevrolet Impala front end rebuild kit featuring nearly everything required to restore a worn out or aging suspension system. This comprehensive kit includes the essential components needed to renew deteriorated...

Product#: *K45305

1973 Impala, Bel Air, Caprice; Front End Suspension Rebuild Kit

1971-72 Chevrolet Impala front end rebuild kit offering nearly everything required to restore a worn out or aging suspension system. This comprehensive assortment of components is engineered to replace deteriorated factory...

Product#: *K45306

1974-76 Impala, Bel Air, Caprice; Front End Suspension Rebuild Kit

1974-76 Chevrolet Impala front end rebuild kit offering nearly everything required to restore a worn out or aging suspension system. This comprehensive assortment of components is engineered to replace deteriorated factory...

Product#: 153639

1980-90 Impala, Caprice; Front Disc Brake Spindle Set; Reconditioned; Pair

Each reconditioned spindle set includes both LH and RH spindles and features a new outer bearing and race (#S34), allowing the spindles to be used with 1973-1977 GM 11 inch diameter rotors found on mid size GM vehicles...

Product#: 10268

1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 12163

1955-64 Chevy Bel Air, 150, 210, Biscayne, Impala; Lower Control Arm Bushing Set; 4 Piece Set; With Cup Washers and Hardware

Reproduction lower control arm bushings for 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your suspension by replacing the old...

Product#: 12297

1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each

Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...

Product#: 153632

1965-70 Impala, Caprice, Bel Air; Upper Tubular Control Arms; RH & LH; Pair

These tubular upper control arms are engineered for maximum strength, durability, and visual impact. Designed as direct stock replacements, they provide a clean, upgraded appearance while offering significantly improved...

Product#: 153628

1958-64 Impala, Bel Air, Biscayne; Front Tubular Lower Control Arms; RH & LH; Pair

These performance tubular lower control arms are engineered to accept standard coil springs, coil over shocks, or air bag shock systems, making them a versatile upgrade for a wide range of suspension setups. Each arm comes...

Product#: 153627

1958-64 Impala, Bel Air, Biscayne; Front Tubular Upper Control Arms; RH & LH; Pair

Reproduction of the original upper tubular upper control arms designed for use with 1958-64 Impala, Bel Air, Biscayne, and Full Size Chevrolet models. These tubular style upper control arms change the way the car drives and...

Product#: A1001

1958-64 Impala / Full Size Upper Control Arm; RH

This is a reproduction of the right hand upper control arm used on 1958-64 full size models. For left hand side use Part # A1000. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold...

Product#: 14796

1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set; Pair

Reproduction of the original style upper control arm shafts for 1958-1964 Chevrolet Impala, Bel Air, and Biscayne models. Each set is engineered to restore proper suspension alignment and factory-correct performance while...

Product#: 154632

Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...

Product#: A1004

1958-64 Impala, Bel Air, Biscayne, 1965-82 Corvette; Lower Control Arm Shaft; LH or RH; Each

Quality reproduction lower control arm cross-shaft for various 1958-1964 Chevrolet Impala, Bel Air, Biscayne, and 1963-1982 Corvette models. Each shaft is manufactured from high quality stamped steel and built to original...

Product#: 153950

1958-64 Impala, Bel Air, Biscayne; Upper Control Arms; Rubber Bushings; Pair

New stock style upper control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH upper control arms with cross shafts, bushings, and ball joints...

Product#: 10203

1955-70 Full Size Chevy; Upper Ball Joint; with Hardware; RH or LH

Reproduction of the original upper ball joint designed for use with 1955-70 Chevy full size models including 1955-57 Chevy, and 1958-70 Impala, Bel Air, Biscayne, and Caprice models. Control arm ball joints take a beating...

Product#: *K45307

1977-79 Impala, Caprice; Front End Suspension Rebuild Kit

1977-79 Chevrolet Impala front end rebuild kit offering nearly everything required to restore a worn out or aging suspension system. This comprehensive assortment of components is engineered to replace deteriorated factory...

Product#: 10231

1958-82 Chevrolet; Lower Ball Joint with Hardware; Various Applications

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: *K45308

1980-96; Impala, Caprice; Front End Suspension Rebuild Kit

1980-96 Chevrolet Impala front end rebuild kit offering nearly everything required to restore a worn out or aging suspension system. This comprehensive assortment of components is engineered to replace deteriorated factory...

Product#: 10277

1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 153633

1965-70 Impala, Caprice, Bel Air; Lower Tubular Control Arms; RH & LH; Pair

These tubular upper control arms are engineered for maximum strength, durability, and visual impact. Designed as direct stock replacements, they offer a clean upgraded appearance along with significantly improved rigidity...

Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...

Product#: 12310

1971-96 GM; Upper Control Arm Bushing; Various Models; Pair

Reproduction style upper control arm bushing designed for various 1971-96 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: A1000

1958-64 Impala / Full Size Upper Control Arm; LH

This is a reproduction of the upper left hand control arm used on 1958-64 full size models. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold separately. For rig ht hand side use Part #...

Product#: 10068783

1970-96 Buick, Chevrolet, Pontiac, Oldsmobile; Lower Control Arm Bumper, Each, Various Models

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...

Product#: 14039013

1977-96 GM; Upper Control Arm; With Shaft; RH

Replacement upper control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement upper control arm includes pre-installed bushings and ball...

Product#: 14797

1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shafts; Pair

Reproduction of the original style lower control arm shafts for 1958-1964 Impala, Bel Air, Biscayne, and other full size Chevrolet models. Each set is designed to restore proper suspension geometry while maintaining an...

Product#: A1007

1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft; Pair; LH & RH; Pair

Quality reproduction lower control arm cross-shafts for various 1958-1964 Chevrolet Impala, Bel Air, and Biscayne models. Each shaft is manufactured in high quality stamped steel and built to original factory specifications...

Product#: 154633

1964-70 Mustang, 1967-70 Cougar; Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...

Product#: 10267

1971-2005 GM; Lower Ball Joint; Thread: 5/8"; RH or LH; Each

Reproduction of the original style lower ball joint for a variety of 1971-2005 GM models as listed. Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving...

Product#: 104113

1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 3742252

1958-64 Impala; Bel Air; Biscayne; 1963-82 Corvette; Lower Control Arm Bumper

Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out.

Product#: *K45309

1963-64 Impala, Bel Air, Biscayne; Front End Suspension Rebuild Kit

1963-64 Chevrolet Impala front end rebuild kit offering nearly everything required to restore a worn out or aging suspension system. This comprehensive assortment of components is engineered to replace deteriorated factory...

Product#: SP97130

1970-81 Camaro/Firebird, 1973-77 Regal Front Adjustable Control Arms add Camber/Caster

SPC Front Upper Adjustable Control Arms design will give you the most adjustability and best clearance of any arm on the market. These adjustable arms come with ball joints that are 1/2? taller than stock to improve camber...

Product#: *R5864B

1958-64 Impala / Full Size Black Tubular Control Arm Kit With Ball Joints - Shafts - Bushings

CPP's Totally Tubular control arms are designed for maximum strength and visual impact. Upper arms are designed to allow for an extra 5° of caster, are made from 1-1/4" x.120" wall D.O.M. tubing and the pivot barrels ar e...

Product#: 11051010

1958-64 Impala Front CoolRide Kit

Product#: 52700

1965-70 Impala; Caprice; Bel Air; QA1 Suspension Lower Control Arms; Street Series; LH and RH

QA1 control arms provide a better ride and improved handling performance. These lower control arms for your 1965-70 GM B-Body offer weight savings over the stock arms, use polyurethane bushings for comfort, durability and low...

Product#: K5754162

1967-72 Camaro/Firebird; 1968-72 Nova 2" Drop Spindles - Billet Aluminum

These billet-aluminum spindles and steering arms are direct-replacement components for popular GM A-, F-, and X-body muscle cars from 1964 to 1972. While maintaining compatibility with the factory lower control arm, and most...

Product#: 52721

1971-76 Impala; Caprice; Bel Air; QA1 Suspension Lower Control Arms; Street Series; LH and RH

QA1 control arms provide a better ride and improved handling performance. These lower control arms for your 1971-76 GM B-Body offer weight savings over the stock arms, use polyurethane bushings for comfort, durability and low...

Product#: GW501

1965-70 Impala / Full Size Front Tubular Lower Control Arms

From Global West Suspension the G-Plus tubular control arms changes the way the car drives and performs. The wander and vague road feel is dramatically improved, even though it's through the stock steering components. The...

Product#: GW96

1965-70 Impala - Tubular Lower Control Arm for Airbags - Front

The lower control arm has a mount that accommodates an airbag resting on top of the control arm, which can also be used for hydraulics. There is no pocket to get in the way of the airbag side walls, thus no chaffing. The...

Product#: GW50

1965-70 Impala / Full Size Front Tubular Upper Control Arms

From Global West Suspension the G-Plus tubular upper control arms for 1965-70 full size models changes the way the car drives and performs. The wander and vague road feel is dramatically improved, even though it's through the...

Product#: TCA7081L

1970-81 Camaro/Firebird, 1973-77 GM A-Body, 1975-79 GM X-Body, 1977-96 GM B-Body; Lower Tubular Control Arm Set; Black Powdercoat

Take your front suspension to the next level with these Totally Tubular™ control arms from Classic Performance Products! The lower arms feature helical stamped mounts welded around the entire perimeter to 1-1/2" 120 DOM...

Product#: PE72015G

1965-70 Impala / Full Size 2 Door Hardtop Black Polyurethane Bushings Set

It doesn't take long before soft suspension rubber begins to deteriorate. Polyurethane is impervious to deterioration caused by oil, grease, and the elements, giving you firm, confident handling that lasts. These bushings are...

Product#: FR2005P

69-70 Fullsize Front End Suspension Kit Polyurethane

Product#: FR2001P

58-60 Fullsize Front End Suspension Kit Polyurethane

Product#: FR2001

58-60 Impala, Full Size; Front End Suspension Kit; Rubber Bushings

CPP's front end sets make it possible to achieve better than new performance for a modest price. Sets include: upper and lower ball joints, outer tie rod ends, control arm bushing kit, and lower bump stops. Sway bar bushings...

Product#: CP586422

1958-64 Chevrolet Impala / Full size - Lower Control Arms (Pair) - with Polyplus™ Bushings

Use CP586421 for stock rubber bushing control arms. Note: No further discounts apply.

Product#: PE72026R

1980-90 Impala / Caprice Red Polyurethane Bushings Set

It doesn't take long before soft suspension rubber begins to deteriorate. Polyurethane is impervious to deterioration caused by oil, grease, and the elements, giving you firm, confident handling that lasts. These bushings are...

Product#: PE72026G

1980-90 Impala / Caprice Black Polyurethane Bushings Set

It doesn't take long before soft suspension rubber begins to deteriorate. Polyurethane is impervious to deterioration caused by oil, grease, and the elements, giving you firm, confident handling that lasts. These bushings are...

Product#: M2DS

CPP; Mustang II, 1975-80 Pinto / Bobcat; 2" Drop Spindles

CPP's Mustang II drop spindles are built from forged steel and heat treated for superior strength. Designed to drop the front end approximately 2" lower than stock while maintaining stock geometry. Will fit 1974-78 Ford...

Product#: GW1030

1958-70 Impala / Full Size Del-A-Lum Upper Control Arm Bushing Set

These Del-a-lum bushings are the top-of-the-line when it comes to suspension control and longevity. They are a direct replacement for rubber or polyurethane control arm bushings. These bushings feature inner and outer thrust...

Product#: PE7310G

1965-70 Full Size With 2 Upper Arms Black Polyurethane Rear Control Arm Bushings Without Shells

It doesn't take long before soft suspension rubber begins to deteriorate. Polyurethane is impervious to deterioration caused by oil, grease, and the elements, giving you firm, confident handling that lasts. These bushings are...