Product#: ES312NL

1958-62 GM; Tie Rod End; Inner / Outer; RH or LH

Reproduction of the original tie-rod end designed for various 1958-62 GM models. Restores vehicle handling, and OE alignment. Reduces tire wear, and improves steering response. Each tie-rod end includes: (1) Tie Rod End, (1)...


1958-64 Chevrolet Impala, Full Size, 1962 Chevy II, 1960-64 C10 Truck; Aluminum Tie Rod Sleeves; With Jam Nuts; Clear Anodized
NEW

Product#: 154122

1958-64 Chevrolet Impala, Full Size, 1962 Chevy II, 1960-64 C10 Truck; Aluminum Tie Rod Sleeves; With Jam Nuts; Clear Anodized

Upgrade your 1958-1964 full-size Chevrolet passenger car, 1962 Chevy II, or 1960-1964 Chevy C10, or GMC C15 pickup with these custom polished aluminum tie rod sleeves. Precision-engineered for a perfect fit, these sleeves...


Product#: ES378R

1969-70 Impala / Full Size LH/RH Inner Tie Rod End

Reproduction inner tie rod end for 1969-70 Impala / full size models. Sold individually. Fits left or right hand side. 2 required per vehicle. {fitment} Note: For a outer tie rod end see part # ES378L.


Product#: ES403L

1971-76 GM Car, Truck; Inner Tie Rod End; RH or LH; Various Models

Reproduction of the original tie-rod end designed for use with various 1971-76 GM passenger and truck models including Impala, Bel Air, Biscaye, Caprice, and 1971-72 Chevy and GMC pickup, Blazer, and Suburban models. Is your...


Product#: ES378L

1969-70 Impala, Caprice, GM B-Body; Outer Tie Rod End; RH or LH

Reproduction of the original outer tie-rod end for 1969-70 Impala, Bel Air, Biscayne, and Caprice models. Manufactured to original equipment specifications to restore your steering system to factory original condition...


Product#: ES2020L

1977-96 LH/RH Inner Tie Rod End

Reproduction inner tie rod end for Various GM vehicles including 1977-96 Impala / full size models. Sold individually. Fits left or right hand side. 2 required per vehicle. Buick Applications: 1973-77 Century 1973-77 Regal...


Product#: ES403R

1971-76 Impala, Caprice, GM B-Body; Outer Tie Rod End; RH or LH; Each

Reproduction of the original outer tie-rod end designed for use with various 1971-76 Chevrolet Impala and GM passenger B-Body models as listed below. Each outer tie rod end is manufactured to factory specifications that meet...


Product#: ES350S

1965-74 GM; Tie Rod Adjusting Sleeve; RH or LH; Various Models

1967-1969 Chevrolet Camaro (RH or LH) 1966-1970 Chevrolet Caprice (RH or LH) 1968-1968 Chevrolet Chevy II (RH or LH) 1965-1970 Chevrolet Impala (RH or LH 1969-1974 Chevrolet Nova (RH or LH) Chevrolet Truck Applications:...


Product#: ES312S

1958-64 GM; Tie Rod Adjusting Sleeve; RH or LH; Each

Reproduction of the original tie rod end adjusting sleeve designed for use with various 1958-64 Chevrolet and GMC models. Is your steering loose or front end out of alignment? Parts in your steering system may be worn out or...


Product#: ES2004S

1957-2005 Tie Rod Adjusting Sleeve; AMC, Buick, Chevy, Ford, Olds, Pontiac; LH or RH

Reproduction tie-rod adjusting sleeve for various 1957-2005 General Motors and AMC model vehicles. Each adjusting sleeve is manufactured to factory specifications replicating the original in quality, fitment and design....


Product#: ES323L

1963-82 GM; Tie Rod End; with Hardware; Inner & Outer; RH/LH

Reproduction of the original inner and outer tie-rod end designed for use with various 1963-82 General Motors vehicles. Each tie-rod end is manufactured in forged steel replicating the original design, fitment, and...


Product#: ES597

1958-64 Impala, Bel Air, 1959-60 El Camino; Inner Tie Rod End; RH or LH

Reproduction of the original inner tie-rod end designed for use with 1958-64 Impala, Bel Air, Biscayne, and 1959-60 El Camino models. Restores vehicle handling, and OE alignment. Reduces tire wear, and improves steering...


Product#: ES370R

1965-70 GM; Impala, Chevy, Pickup, Blazer, Suburban; Inner Tie Rod End; with Hardware; RH or LH

Reproduction of the original inner tie-rod end designed for use with various 1965-70 GM models including 1965-68 Impala, Full Size, and 1965-70 Chevy and GMC truck models. Is your steering loose or front end out of alignment?...


Product#: ES350L

1965-70 Chevy, Impala, Pickup, Blazer, Suburban; Outer Tie Rod End; with Hardware; RH/LH

1967-1970 GMC C15/C1500 Suburban (LH/RH Outer) 1970-1970 GMC Jimmy (LH/RH Outer) 1965-1966 GMC Suburban (LH/RH Outer) The OER® Authorized logo represents products that meet or exceed stringent OER® quality control...


1958-64 Chevrolet Impala, Full Size, 1962 Chevy II, 1960-64 C10 Truck; Aluminum Tie Rod Sleeves; With Jam Nuts; Black
NEW

Product#: 154123

1958-64 Chevrolet Impala, Full Size, 1962 Chevy II, 1960-64 C10 Truck; Aluminum Tie Rod Sleeves; With Jam Nuts; Black

Upgrade your 1958-1964 full-size Chevrolet passenger car, 1962 Chevy II, or 1960-1964 Chevy C10, or GMC C15 pickup with these custom polished aluminum tie rod sleeves. Precision-engineered for a perfect fit, these sleeves...


1958-64 Chevrolet Impala, Full Size, 1962 Chevy II, 1960-64 C10 Truck; Aluminum Tie Rod Sleeves; With Jam Nuts; Polished
NEW

Product#: 154124

1958-64 Chevrolet Impala, Full Size, 1962 Chevy II, 1960-64 C10 Truck; Aluminum Tie Rod Sleeves; With Jam Nuts; Polished

Upgrade your 1958-1964 full-size Chevrolet passenger car, 1962 Chevy II, or 1960-1964 Chevy C10, or GMC C15 pickup with these custom polished aluminum tie rod sleeves. Precision-engineered for a perfect fit, these sleeves...


Product#: 1253515

1959-77 Chevrolet, Buick, Cadillac, Oldsmobile, Pontiac; Tie Rod End Dust Boot Set; GM Vehicles; Set of Four

Reproduction tie rod end dust boots with OE part number on the boots. Tie rod end dust boots measure approximately 1-3/16" on bottom, 1-1/4" on top & 1/2" hole. Sold as a set of 4. Fit a wide variety of 1959 & later GM makes...


Product#: ES2019R

1977-2004 Buick, Cadillac, Chevy, Pontiac, Olds; Outer Tie Rod End; RH or LH; Each; Various Models

Reproduction of the original outer tie-rod end designed for use with various 1977-96 Chevrolet Impala and GM passenger B-Body models as listed below. Each outer tie rod end is manufactured to factory specifications that meet...


Product#: *1253599

1958-96 GM; Grease Zerk Fitting Kit Plated Ball Check; 1/4"-28, Straight; 9/64" thread; 1/2" length; 6 Piece Set

Reproduction plated grease or zerk fittings for a variety of uses including replacement of tie rod end and center link grease fittings. When restoring tie rod ends, these fittings need to be replaced for best results. Six...


Product#: 913101R

Tie Rod End Dust Boots; Polyurethane; Red; Pair; GM, Chrysler, Ford

Repair torn and worn-out tie rod end boots without having to purchase the entire tie rod. Add durability surpassing most OEM rubber boots with this quality reproduction. Manufactured in high performance polyurethane for added...


Product#: H1612

1970-96 Black Hotchkis 11/16" Thread Tie Rod Sleeves

Enhance your steering precision with machined tie rod adjusting sleeves. These gloss black powdercoated sleeves have machined wrench flats and include jam nuts for quick and easy toe adjustment. Sold as a pair. Made in USA...


Product#: GW90

1958-64 Impala / Full Size Tubular Tie Rod Adjust Sleeves

Tubular tie rod adjusting sleeves replace the standard split sleeve tie rod adjusters located between the inner and outer tie rods. The sleeve is stronger than stock because of full thread engagement. The tie rod sleeves...


1958-64 GM; Tie Rod Adjusting Sleeve; Black; Pair
NEW

Product#: CP312A

1958-64 GM; Tie Rod Adjusting Sleeve; Black; Pair

Aluminum tie rod end adjusting sleeve designed for use with various 1958-64 Chevrolet and GMC models. Hex type sleeve for easy adjustment online factory original clamp end style. Parts in your steering system may be worn out...


Product#: C16350A

1967--69 GM F-Body; 68-74 Nova Billet Tie Rod Sleeves - Brushed Finish

Looking for a custom look and appreciate the small details? CPP's 6061 T6 aluminum tie rod sleeves are available with your choice of brushed, black, or polished finish. Includes jam nuts. Sold in pairs. Applications: 1967-69...


Product#: 1253529

1964-77 GM; Tie Rod Sleeve Bolt Set; 4 Pieces

Factory-correct tie rod sleeve bolts with TR head stamp as original. Applications: 1967-72 Camaro models 1967-72 Firebird models 1964-72 Impala / Full Size models 1964-72 Chevy II / Nova models


Product#: 913102G

Black Polyurethane Tie Rod Dust Boot; Octagon Style; Black

Repair torn and worn-out tie rod end boots - without having to buy the entire tie rod. Add durability surpassing most OEM rubber boots. Exclusive octagon style features 5-point sealing action. Made of high performance...


Product#: GES2020RLT

1973-2005 Tie Rod End; Inner; LH or RH; Various GM Models

Reproduction of the original inner tie-rod end designed for use with 1973-2005 GM models. Manufactured to factory specifications replicating the original in fitment and design. Restores vehicle handling, and OE alignment....


Product#: 913101G

Tie Rod End Dust Boots; Polyurethane; Black; Pair; GM, Chrysler, Ford

Repair torn and worn-out tie rod end boots without having to purchase the entire tie rod. Add durability surpassing most OEM rubber boots with this quality reproduction. Manufactured in high performance polyurethane for added...


Product#: H1607

1965-74 Black Hotchkis 5/8" Thread Tie Rod Sleeves

Enhance your steering precision with machined tie rod adjusting sleeves. These gloss black powdercoated sleeves have machined wrench flats and include jam nuts for quick and easy toe adjustment. Sold as a pair. Made in USA...


Product#: E5252

QA1 Heavy Duty Tie Rod Sleeves 11/16" X 3-1/2"

Install these heavy duty QA1 tie rod sleeves for a positive steering improvement in most vehicles. Manufactured from solid steel hex stock then zinc plated for durable good looks and corrosion resistance. Sold as a pair....


Product#: GW20

1965-72 Impala / Full Size Tubular Tie Rod Adjust Sleeves

Tubular tie rod adjusting sleeves replace the standard split sleeve tie rod adjusters located between the inner and outer tie rods. The sleeve is stronger than stock because of full thread engagement. The tie rod sleeves...


Product#: GK6111

1971-96 Impala, Fullsize Chevy; Control Arm Bushing Set

Manufactured with high grade natural rubber construction for maximum strength and durability.


Product#: MN191712G

1958-96 Black Polyurethane Tie Rod End Boots

It doesn't take long before soft suspension rubber begins to deteriorate. Polyurethane is impervious to deterioration caused by oil, grease, and the elements. Sold in pairs. 2 pairs required per vehicle. Made in the USA...


Product#: GK6116

1971-96 Impala, Fullsize Chevy; Control Arm Bushing Set

Manufactured with high grade natural rubber construction for maximum strength and durability.


Product#: GK5208

1970-2005 Ball Joint; Upper; Various GM Models

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...


Product#: GK6161

Stabilizer Bar Bushin; 1"-1-1/8"; Various GM Models

This replacement sway bar bushing will replace the original exactly. Sold as a pair. For models with a 1"-1-1/8" sway bar. {fitment}


Product#: GW30

1994-96 Impala / Caprice Tubular Tie Rod Adjust Sleeves

Tubular tie rod adjusting sleeves replace the standard split sleeve tie rod adjusters located between the inner and outer tie rods. The sleeve is stronger than stock because of full thread engagement. The tie rod sleeves...


Product#: 154101

1965-74 Impala, Camaro, Nova, Truck;Tie Rod Adjusting Sleeve, with Clamps, OE Type, LH or RH; Each

Technically correct in appearance with original factory installed component. OE quality reproduction from Classic Suspensions. Manufactured by an OE supplier to modern technical specifications while offering restorers an...