Product#: UR586817R

1958-64 Impala / Full Size Rear Axle Dropout 30-1/4" Long 17 Spline; RH

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...

Product#: M12149

1966-70 Full Size Moser C-Clip Axles 10 Bolt 31-5/16" Long 28 Spline

Moser offers forged steel street axles for 10 and 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Note: No further discount s apply.

Product#: M12150

1966-70 Impala / Full Size Moser 30 Spline, 31-5/16" Long C-Clip Axles For 12 Bolt Rear Ends

These Moser forged steel street axles for 12 bolt Chevrolet rear end are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE application. Made in the USA Note: Special order, must be prepaid....

Product#: UR657030

1965-70 Impala / Full Size LH/RH 12 Bolt 31-3/8" Long, 5 Lug, 30 Spline Rear Axle

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...

Product#: UR9196306

1991-96 Impala / Caprice LH/RH 10 Bolt 31-1/16" Long 30 Spline Rear Axle

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...

Product#: UR657228

1965-72 Impala / Full Size LH/RH 10 Bolt 31-3/8" Long 28 Spline Rear Axle

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...

Product#: W607

1958-64 Rear Axle Bearing

Prevent costly damage by replacing rear axle bearings before they seize! Always check the bearings and seals whenever removing the rear drums for signs of wear. Sold individually. 2 required per vehicle. {specs}

Product#: G6045

1965-81 Axle Shaft Lock/C-Clip (.150)

Original replacement locks for applications below. Fits 1967-81 with.150 horseshoe.

Product#: W507

1965-89 GM Rear Axle Bearing

Prevent costly damage by replacing rear axle bearings before they seize with this premium replacement rear axle bearing. Always check the bearings and seals whenever removing the rear drums/axle for signs of wear. Sold...

Product#: RAG001

1958-64 Impala / Full Size, 1959-60 Chevy/GMC Truck; Rear Axle Flange Gaskets

Replacement gaskets for the rear axle flanges on your 1958-64 Impala/full size model or 1959-60 Chevy or GMC truck. Set includes 2 gaskets. {fitment}

Product#: W1563

1965-02 Rear Axle Repair Bearing

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...

Product#: M28259

Moser 7/16" - 20 X 1-3/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with disc brakes. These are a great addition when installing Moser axles on your vehicle or just replacing your old wheel studs. Sold as a set of 10. One...

Product#: M28060

Moser 7/16" - 20 X 1-1/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. Note:...

Product#: W2689

1971-76 Impala / Full Size Rear Axle Bearing Seal

Prevent premature bearing or brake failure! Replace aging, cracked or deteriorated rear axle seals to keep gear oil and grease in the axle tube where it belongs. Sold individually. 2 required per vehicle. Fits 1971-76 models...

Product#: 712146

1977-79Impala / Full Size Rear Axle Bearing Seal

Prevent premature bearing or brake failure! Replace aging, cracked or deteriorated rear axle seals to keep gear oil and grease in the axle tube where it belongs. Sold individually. 2 required per vehicle. Fits 1977-79 models...

Product#: A6591311

1959-64 Chevrolet Impala / Full Size; 59-60 El Camino - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: UR586817L

1958-64 Impala / Full Size Rear Axle Dropout 28-7/8" Long 17 Spline; LH

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...

Product#: M12151

1991-96 Moser 30 Spline, 30-3/8" Long C-Clip Axles For 8.5" 10 Bolt Rear End With Drum Brakes

These Moser forged steel street axles for 10 bolt Chevrolet rear end are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE application. Made in the USA Note: Special order, must be prepaid....

Product#: M12152

1993-96 Moser 30 Spline, 30-5/16" Long C-Clip Axles For 8.5" 10 Bolt Rear End

These Moser forged steel street axles for 10 bolt Chevrolet rear end are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE application. Made in the USA Note: Special order, must be prepaid....

Product#: UR9196308

1991-96 Impala / Caprice LH/RH 10 Bolt 31-3/8" Long 30 Spline Rear Axle

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...