Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: A3178

1958-63 Chevy, GMC Truck, 1958-61 Impala, Full Size; Headlamp Adjuster Screw & Nut Set; 8 Piece Set

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 8 Pieces - (1) adjusting screw, (1) plastic adjusting nut, (2) mounting screws with (2) washers and (2) nuts. 4 sets are...

Product#: TF400533

1955-63 Chevrolet Full Size Passenger; Headlamp Retaining Ring Spring; 2nd Design

Reproduction of the original spring used on the headlamp retaining ring spring for various 1955-63 Chevrolet models including Tri-5, Impala and Corvette models. Replaces OEpart numbers # 5946543, 5948814 2nd design. {fitment}

Product#: 6027292

1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...

Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.

Product#: *B1436

1962-68 Impala and Fullsize; 1/4-28 x 1" GM Headlamp Adjuster Screw With Nylon Nut; 16 Piece Set

Correct reproduction of the headlamp beam adjusting hardware set for various 1962-up GM models. Includes (8) nylon nuts, (8) 1/4"-28 x 1" adjuster screws. Each 16-piece set includes enough adjusters for both the right and...

Product#: A1026

1/4"-28 GM Headlight Beam Nylon Adjuster Nut

This 1/4"-28 headlight beam adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly. Fits a wide variety of GM vehicles from 1962-on. Use as required. Sold individually....

Product#: *B1437

1965-75 Impala / Full Size Headlamp Adjuster Screw And Nut Set

Reproduction of the headlamp adjusting hardware required for 1965-75 Impala, Biscayne, Bel Air and Caprice, as well as a variety of additional GM applications. This adjustor set contains the hardware required for proper...

Product#: *596686

1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"

Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 9851

1/4"-28 GM Headlamp Adjuster Nylon Nut

This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...

Product#: A5788

1/4-28 GM Headlamp Adjuster Nylon Nut

Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68 Full...

Product#: A1025

1976-1995 GM; Headlight Beam Adjuster Nut; 1/4"-28

This green 1/4"-28 nylon nut mounts directly to the headlamp housing and enables the headlamp beam to aimed correctly. Designed for GM vehicles with fiberglass headlamp panels. Fits a variety of GM vehicles from 1976-on....

Product#: A9400115

1940-81 GM; F-Body / Impala / Nova / Truck - Headlamp Retaining Ring Screw Set (6 Pieces)

Headlamp retaining ring screws are used to hold the headlamp bulb to the mounting bucket.

Product#: L19136

1961 Impala; Bel Air; Biscayne; Headlight Bucket to Bezel Mounting Bracket Set; LH or RH

Replacement headlight bezel to bucket mounting bracket set for 1961 Chevrolet full size models. This kit includes (4) headlight bezel brackets, (4) j-nuts and (8) rivets. Each kit includes the brackets for one inner and one...

Product#: A2303

J Nut #10 Screw Size;.027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size,.027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.

Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.

Product#: G1832

1977-97 GM; Headlamp Beam Adjusting Screw and Nut; Various Models

Original GM adjusting screw and nut designed for use with various 1982-97 GM models as listed. Each screw is manufactured by General Motors for an authentic appearance and fitment. Sold individually. Use as required....

Product#: B10963

Headlamp Adjusting Spring - Pair

Product#: 40708

#8-32 x 1/2" Slotted Round Machine Screw; Zinc

#8-32 x 1/2" Slotted Round Machine Screw with Zinc finish used for a variety of purposes including for mounting headlight adjuster brackets. This screw is found in the set headlamp adjuster screw and nut set, part # A3178....

Product#: K6500

1965 Impala, Bel Air, Biscayne; Headlamp Bezel Lower Clip; Each

This is a reproduction headlamp bezel lower clip for 1965 GM Impala and full size vehicles. These lower clips are manufactured from injection molded tooling replicating the original in quality, design and fitment. This clip...

Product#: 4919653

1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid

Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...

Product#: B1435

1958-63 Buick, Chevy, GMC Truck, Corvette, Impala; Headlamp Adjuster Hardware Set ; 64 Piece Kit; Various Models

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 64 Pieces - (8) adjusting screw, (8) plastic adjusting nut, (16) mounting screws with (16) washers and (16) nuts. 1 set is...

Product#: A8942

Grill to Headlamp Nylon Nut

Reproduction of this special nylon nut used to mount the headlamp bezels on 1965 Chevrolet Full Size models, 1966-70 Pontaic GTO, Lemans, and Tempest models, as well as 1970-73 Pontiac Firebird models. Firebird models...

Product#: 0008655

80-81 Attachment Screw Grommet Nylon

NOS GM Headlight & Tail Light Nut GM Part Number 2008655 #8 or #10 Screw Size Panel Range: 7/8"-15/16" Fits Into 1/4" Hole GM 1977-On Limited to quantitiy on hand

Product#: 14014

1958-1966 Bel Air, Impala; 1958-72 Chevy, GMC Truck ; Headlamp Mounting Bucket & Trim Ring Set; 2 Tab; 8 Piece Set

OER®reproduction of the original 2-tab headlamp mounting buckets and headlamp mounting rings designed for use on various GM vehicles including 1958-61 Chevrolet trucks and 1958-72 GMC pickup truck models. Each headlamp...

Product#: 5966170

1976-88 GM; Headlamp Retaining Ring; Rectangular Style; Stainless Steel; 4" x 6" Lamp Design; Each

Reproduction of the original headlamp headlamp retaining ring designed for use with various 1976-1988 GM passenger car and trucks models. Each rectangular retaining ring is manuactured in quality stainless steel replicating...

Product#: *R493

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...

Product#: *R492

Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;

Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...

Product#: A10165

# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head

Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...

Product#: 153930

1958-82 Chevy, Pontiac; Headlamp Mounting Set; Various Quad Headlamp Models; 3 Tab

Reproduction of the original headlamp mounting set designed for use on various Chevrolet and GMC truck models. This set includes four 3-tab stainless headlamp retaining rings, four EDP coated "square-hole" style headlamp...

Product#: 3982098

U-Type Extruded Clip Nut, Fits 1/4-20 Bolts, Black Phosphate Coated

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. This is the correct nut used to install the rear tail lamp to the body. Can be used to install the rear...

Product#: WE20118

1982-96 GM; Multipurpose Relay

This relay is mounted on the base of the power antenna motor. This relay may become inoperative over time due to excessive heat and electrical loads, leaving you without the use of its power antenna. Also used for headlamp...

Product#: K89528

Fantastic Plastic Polish; Headlight and Plastic Restorer; Lens Polish; 16 Oz. Pint Bottle

Restores, revitalizes & protects while removing yellow film, cloudy streaks, hairline scratches, haze & halos from clear, smooth plastics. Excellent on headlight covers, taillight lenses, bug deflectors, instrument covers,...