Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: K72

1968-69 Impala. Bel Air, Chevelle, Biscayne, Station Wagons; Side Marker Bezel; Chrome; Front or Rear; Each

Reproduction of the original chrome side marker lamp bezel designed for use with various 1968-69 Chevrolet models as listed below. Manufactured in die-cast zinc and chrome plated to match the original in quality and design....

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 20030351

1977-91 Buck, Chevy, Pontiac, Olds; Dome Lamp Base Reflector; Round; Various Models

OER® reproduction of the original round dome light base reflector for various 1977-1987 GM models. Each dome reflector is manufactured in injection molded ABS, with bright chrome trim, replicating the original reflector...

Product#: A3178

1958-63 Chevy, GMC Truck, 1958-61 Impala, Full Size; Headlamp Adjuster Screw & Nut Set; 8 Piece Set

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 8 Pieces - (1) adjusting screw, (1) plastic adjusting nut, (2) mounting screws with (2) washers and (2) nuts. 4 sets are...

Product#: 881311A

1967 Impala; Impala SS; Bel Air; Tail Lamp Assemblies; Except Station Wagon Models; LH and RH

Reproduction tail lamp assemblies for 1967 Impala, Impala SS and Bel Air models. These reproduction assemblies are manufactured to factory specifications for an authentic fit and original appearance. Each assembly includes...

Product#: CX2043

1955-87 Chevrolet, GMC, Pontiac; Glove Box Lamp Assembly; with Socket and Wiring

Replace your original glove box lamp with this correct service replacement for 1955-72 GM models. Features correct orange color coated wire, lamp, socket, housing, and switch. Includes short red lead for early applications...

Product#: 5954187

1963 Impala, Bel Air, Biscayne; Tail Light Lens Bezel; Chrome; Each

OER® supurb die-cast reproduction of the original tail lamp and back up lens trim bezels for 1963 Impala models. Each reproduction bezel is manufactured in a crisp, detailed die cast and features a brightly polished...

Product#: 5955195

1964-73 GM; License Lamp Lens; with GM Markings; Various Models

Reproduction of the original license lamp lens designed for use on 1967-69 Camaro and various other GM models. Produced in UV stable acrylic material for clarity, and features the correct "Guide" and SAE markings for complete...

Product#: 3830697

1964 Impala, Biscayne, Bel Air; Headlight Bezel ; Each

Reproduction headlamp bezel for 1964 Chevrolet Impala and Full Size models. Each bezel is manufactured in quality aluminum replicating the original in quality and design. Can be installed on the RH or LH sides. Sold...

Product#: 5954188

1963 Chevrolet Impala; Rear Back Up Lens; Each

OER reproduction of the original rear back up light lens designed for use with 1963 Chevrolet Impala models. Each lens is injection-molded with UV stable acrylic to prevent color fade and features correct GUIDE and SAE...

Product#: H5001

Headlamp Sealed Beam; 12 Volt; High Beam; 5-3/4" Round; Halogen

Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting.

Product#: K6400

1964 Impala, Bel Air, iscayne; Headlamp Bezel Lower Clip; Each

Reproduction of the original front headlamp bezel lower mounting clip designed for use on 1964 GM Impala and full size models. Clips are manufactured with injection molded tooling replicating the original in quality and...

Product#: B239380

1962 Impala, Biscayne, Bel Air; Headlamp Bezel Set; Pair

Reproduction headlamp bezel set for 1962 Chevrolet Impala, Bel Air and Biscayne models. Each bezel is manufactured in stamped aluminum that replicates the original in quality, design and fitment. Will install as original...

Product#: K104

1963 Impala, Biscayne, Bel Air; Headlight Bezel Set; 4-Piece Set

Reproduction front headlight bezel set for 1963 Impala and Full Size models. Each bezel set is manufactured in stamped aluminum featuring a bright polished finish offering an original fit and appearance. Sold in set of 4...

Product#: 3917467

1968 Impala, Caprice; Headlamp Bezel; Chrome; LH Driver Side

Reproduction front headlamp bezel for 1968 Chevrolet Impala, Caprice, Bel Air, and Biscayne models. Manufactured in quality die-cast zinc featuring a bright chrome plated finish to replicate the original in quality,...

Product#: 5954186

1963 Chevy Impala; Rear Tail Light Lens; RH or LH; Each

OER reproduction of the original rear tail light lens designed for use with 1963 Chevrolet Impala models. Each lens is manufactured to exact factory specifications using OEM grade acrylic materials for protection against...

Product#: 3885963

1967 Impala, Bel Air, Biscayne, Caprice; Headlamp Bezels; Pair; OER

Reproduction headlamp bezel set for 1967 Chevrolet Impala, Bel Air, Biscayne and Caprice models. Each headlight bezel set is manufactured in quality stamped aluminum to replicate the original in fit and appearance. Features...

Product#: C1724

1966 Impala, Bel Air, Biscayne, Caprice; Headlamp Bezels; RH & LH; Pair

Reproduction headlamp bezel set for 1966 Caprice, Impala, Bel Air, and Biscaynemodels. Each bezel set is manufactured from stamped aluminum and replicates the original in quality and fit. Features correctly painted accents...

Product#: 910271

1964 Impala, Bel Air, Biscayne; Park Lamp Housing; with Pigtail; RH 0r LH; Each

Reproduction of the original park lamp housing designed for use with 1964 Impala, Bel Air, and Biscayne models. Each housing is manufactured in stamped steel to factory specifications replicating the original in design and...