1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long
Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long
Classic $9.99 ea
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
Classic $3.99 set
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
1991-96 Chevrolet Caprice/Impala; Fuel Tank Kit; With Neck, Hoses, Clamps, and Hardware
OER Replacement silver powder-coated steel fuel tank for 1991-96 Caprice/Impala and other GM models. The original plastic fuel tank is the weak link in the fuel system of the full size GM passenger car. Prone to cracking and...
1991-96 Chevrolet Caprice/Impala; Fuel Tank Kit; With Neck, Hoses, Clamps, and Hardware
Classic $524.99 kit
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
Classic $17.99 set
Reproduction of the original fuel tank designed for use with 1969-1970 Chevrolet Impala, Bel Air, Biscayne, and Caprice models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel...
Correct reproduction of the original fuel tank designed for with 1965-1966 Chevrolet Impala, Bel Air, Biscayne, and Caprice models (except station wagon). This reproduction fuel tank is manufactured in stainless steel...
1965-66 Chevrolet Impala, Bel Air, Biscayne, Caprice; Fuel Tank; with Filler Neck; Stainless Steel; 20 Gallon Capacity
Classic $403.99 ea
Replacement fuel tank for 1969-70 full-size passenger car models (except wagon). This fuel tank is made of stainless steel and has a capacity of 24 gallons (91 liters), measures 35" 37" x 4" and includes the fuel sender lock...
Reproduction of the original fuel tank designed for use with 1974 Chevrolet Impala, Bel Air, and Caprice models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne...
1968 Chevrolet Full-Size (Except Wagon); Fuel Tank W/Neck; 24 Gallon; Niterne Coated Steel
Replacement fuel tank for 1968 full-size passenger car models (except wagon). This fuel tank is made of niterne-coated steel and has a capacity of 24 gallons (91 liters), measures 35" 37" x 4" and includes the fuel sender...
1968 Chevrolet Full-Size (Except Wagon); Fuel Tank W/Neck; 24 Gallon; Niterne Coated Steel
Classic $329.99 ea
1959-60 Impala, Bel Air, Biscayne; NiTerne Coated Fuel Tank; with Neck; 16 Gallon
Reproduction of the original fuel tank designed for use with 1959-60 Chevrolet Impala, Bel Air, and Biscayne models (except El Camino, station wagon). This reproduction fuel tank is manufactured in quality stamped steel...
1959-60 Impala, Bel Air, Biscayne; NiTerne Coated Fuel Tank; with Neck; 16 Gallon
Classic $259.99 ea
Reproduction of the original style fuel tank designed for use with 1975-76 Impala, Bel Air, and Caprice station wagon models (except 2 and 4 door coupe models). Each fuel tank is manufactured in quality stamped steel and zinc...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
Reproduction of the original style fuel tank designed for use with 1975-76 Impala, Bel Air, and Caprice models. Each fuel tank is manufactured in quality stamped steel and zinc plated matching the original OE design. Features...
1975-76 Chevrolet Impala, Bel Air, Caprice; Fuel Tank; with Neck; Zinc Coated; 26 Gallon Tank; Except Station Wagon
Classic $230.99 ea
1975-76 Impala / Full Size (Ex Wagon); Fuel Tank With Neck; 26 Gallon; Niterne Steel; GM40N
Replacement fuel tank for 1975-76 Chevrolet passenger models (except wagon). This fuel tank is made of niterne-coated steel and features a filler neck, measures 33 3/4" x 31 3/4" x 9 3/8", has a capacity of 26 gallons (98...
1975-76 Impala / Full Size (Ex Wagon); Fuel Tank With Neck; 26 Gallon; Niterne Steel; GM40N
Classic $227.99 ea
1959-60 Impala, Bel Air, Biscayne; Zinc Coated Fuel Tank; with Neck; 16 Gallon
Reproduction of the original fuel tank designed for use with 1959-60 Chevrolet Impala, Bel Air, and Biscayne models (except El Camino, sedan delivery, or station wagon). This reproduction fuel tank is manufactured in quality...
1959-60 Impala, Bel Air, Biscayne; Zinc Coated Fuel Tank; with Neck; 16 Gallon
Classic $199.99 ea
Reproduction fuel tank for 1965-66 Chevrolet Impala, Bel Air, and Biscayne models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel featuring a Zinc coating for rust and corrosion...
Reproduction of the original style fuel tank designed for use with 1985 Impala, 1985-89 Caprice Full Size models with Fuel Injection. This fuel tank is manufactured in zinc-coated stamped steel to original factory...
The most accurate reproduction fuel tank sending unit in the industry, with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and float as original. This unit...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Mounting Brace; Each
Reproduction gas tank mounting brace for 1961-64 Impala, Bel Air, and Biscayne models. This brace attaches to the bottom of the trunk floor to support the gas tank. The gas tank mounting strap attaches to this brace....
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Mounting Brace; Each
Classic $142.99 ea
1967-70 Impala, Bel Air, Biscayne, Caprice; Fuel Sending Unit; 3/8"; 0-90 ohm
Reproduction fuel sender for 1967-70 Impala, Bel Air, Biscayne, and Caprice models except station wagon models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with...
1967-70 Impala, Bel Air, Biscayne, Caprice; Fuel Sending Unit; 3/8"; 0-90 ohm
Classic $59.99 ea
Reproduction fuel tank for carbureted gasoline powered or diesel powered 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon, El Camino and Caballero models. This fuel tank is manufactured in zinc-coated...
Reproduction fuel tank for carbureted gasoline or diesel powered 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac models. This fuel tank is manufactured in zinc-coated stamped steel to original factory...
Reproduction of the original style fuel tank designed for use with 1980-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac Full Size models as listed except station wagon. This fuel tank is manufactured in zinc-coated...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Classic $29.99 set
Reproduction fuel tank sending unit for 1961-64 Chevrolet Impala. Bel Air, and Biscayne models except station wagon. Each fuel sending unit is manufactured in quality steel to resist corrosion within your fuel tank. Provides...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16"; Except Station Wagon
Reproduction fuel tank sending unit produced with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original. This unit monitors the fuel...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16"; Except Station Wagon
Classic $49.99 ea
Reproduction fuel tank sending unit for 1965-66 Chevrolet Impala, Bel Air, Biscayne, Caprice models and 1965-67 Chevelle, El Camino, Malibu and other GM A-Body and B-Body models with 5/16" line. The most accurate reproduction...
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Neck; Gray Primer; Except Station Wagon Models
Reproduction of the original fuel tank filler neck designed for use with 1964 Impala, Bel Air, and Biscayne models (except station wagons). Each neck is manufactured to factory dimensions and replaces the original exactly....
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Neck; Gray Primer; Except Station Wagon Models
Classic $42.99 ea
1968-69 Camaro Z28 Carb to Accelerator Lever Rod; 302 4 bbl
Reproduction accelerator pedal rod for 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...
Reproduction of the original gas tank straps designed for use with 1967-1970 Chevrolet Impala, Bel Air, Biscayne, Caprice models (except station wagon). Each strap is manufactured in quality stainless steel with all correct...
Reproduction of the original fuel tank mounting straps designed for use with 1961-1964 Impala, Bel Air, and Biscayne models (except station wagon). Each strap is manufactured in quality stamped steel and galvanized for long...
1961-1964 Impala, Bel Air, Biscayne; Fuel Tank Mounting Straps; Zinc Coated Steel; Pair; Except Station Wagon
Classic $29.99 pr
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
Exact reproduction throttle cable for 1975-77 Impala, Full Size and 1977 Firebird Trans Am models with a 403 motor. Features the eyelet style end on the cable at the carburetor and mounts to the throttle cable bracket with...
1977 Pontiac Firebird, Trans Am with 403 Motor, 1975-77 Impala, Full Size; Accelerator Throttle Cable
Classic $59.99 ea
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Grommet; Each
Reproduction of the original fuel tank filler grommet designed for use with 1964 Impala, Bel Air, Biscayne, 1964-67 El Camino, Chevelle, and Malibu station wagon models. Grommets are manufactured to correct dimensions...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube
Classic $39.99 ea
Reproduction of the original gas tank straps designed for use with 1959-1960 Chevrolet Bel Air, Impala, and Biscayne models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic...
1968-72 Camaro, Impala, Nova; Holley Throttle Cable Bracket
Reproduction of the original style Holley throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...
Reproduction of the original gas tank straps designed for use with 1958 Chevrolet Bel Air, Impala, and Biscayne models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic fitment...
1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve
Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
Classic $24.99 ea
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, and Biscayne models with a 16 gallon fuel tank (except station wagon). Each strap is manufactured in quality stamped steel,...
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction fuel tank mounting strap set for various 1977-1988 Buick, Chevrolet, Pontiac, and Oldsmobile full size models as listed (except station wagon). Each strap is manufactured in quality stamped steel, galvanized and...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1965-66 Impala, Bel Air, Biscayne, Caprice; Gas Tank Mounting Straps; Pair
Reproduction gas tank mounting straps for 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except station wagon models. Each strap is manufactured in quality stamped steel replicating the original configuration...
1965-66 Impala, Bel Air, Biscayne, Caprice; Gas Tank Mounting Straps; Pair
Classic $18.99 pr
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Classic $24.99 set
Correct reproduction of the original fuel tank designed for with 1968 Chevrolet Impala, Bel Air, Biscayne, Caprice, Bonneville, Catalina, and Executive models (except station wagon). This reproduction fuel tank is...
Correct reproduction of the original fuel tank designed for with 1967 Chevrolet Impala, Bel Air, Biscayne, Caprice, Bonneville, Catalina, and Executive models (except station wagon). This reproduction fuel tank is...
Correct reproduction of the original fuel tank designed for with 1961-64 Chevrolet Impala, Bel Air, Biscayne models (except station wagon). This reproduction fuel tank is manufactured in stainless steel replicating the...
Reproduction of the original style fuel tank designed for use with 1968 Impala, Bel Air, Biscayne passenger car models (except wagon). This fuel tank is made of zinc-coated steel and has a capacity of 24 gallons (91 liters),...
1968 Impala, Bel Air, Biscayne; Fuel Tank; with Filler Neck; Zinc Coated; 24 Gallon Tank; Except Station Wagon
Classic $319.99 ea
1967 Chevrolet/Pontiac Full-Size (Ex Wagon); Fuel Tank W/ Neck; Niterne Steel; GM53C
Replacement fuel tank for 1967 full-size passenger car models (except wagon). This fuel tank is made of nitern coated steel measures 35" 37" x 4" and includes the filler neck, fuel sender lock ring and o- ring gasket for a...
1967 Chevrolet/Pontiac Full-Size (Ex Wagon); Fuel Tank W/ Neck; Niterne Steel; GM53C
Classic $329.99 ea
Reproduction of the original style fuel tank designed for use with 1967 Impala, Bel Air, Biscayne, Bonneville, Catalina passenger car models (except wagon). This fuel tank is manufactured from quality steel and includes a...