Product#: *R1024

1964 Impala SS; Trunk and Rear Cove Panel Molding Kit; without Trunk Spear

Reproduction of the original rear deck panel molding kit designed for use 1964 Impala SS models. Each molding is manufactured to correct OE specifications replicating the original in every detail. Note: Chevrolet emblem sold...

Product#: *R1025

1964 Chevrolet Impala; Trunk And Rear Cove Panel Molding Kit; with Trunk Spear

Reproduction of the original style rear deck panel moldings desogned for use with 1964 Chevrolet Impala standard models except station wagons. Each molding is manufactured to correct factory specifications for an authentic...

Product#: 748618

1962 Impala; Tail Panel Cove Moldings; with Hardware; Pair

Correct reproduction of the original tail lamp cove moldings for 1962 Impala and Full size Chevrolet models. These polished aluminum moldings attach to the quarter panel and act as an extension of the trunk lid molding....

Product#: 748624

1962 Impala, Bel Air; Upper Trunk Lid Molding; with Clips

Reproduction of the upper trunk lid molding designed for use on 1962 Impala and Bel Air Chevrolet models. Trunk lid molding fits on the rear upper section of the trunk lid. Each molding is contoured and stamped in quality...

Product#: *R1026

1964 Impala SS Trunk And Rear Cove Panel Molding Kit With Trunk Spear

Reproduction of the rear deck panel molding set designed foruse on 1964 Impala SS models. Each molding is manufactured to exact factory specifications and will replace the original exactly. Replace the old or worn out rear...

Product#: C2369

1964 Impala, Bel Air, Biscayne; Center Rear Cove Molding; Standard Models

Reproduction of the original rear cove center panel molding designed for use on 1964 Impala and Full Size Chevrolet models with factory standard trim level. Each molding is stamped from quality aluminum material in the...

Product#: *R1964

1964 Impala Standard Model Rear Cove Panel Molding Kit

Reproduction rear cove panel moldings with lettering as original. Kit includes: Center molding with letters RH quarter extension molding LH quarter extension molding Mounting clips These are exact reproduction moldings...

Product#: 3853674

1964 Impala, Bel Air; Trunk Center Molding; Trunk Spear; with Hardware

Reproduction of the original Chevrolet Impala or Bel Air center trunk split molding designed for use on 1964 models. This center trunk molding runs down the center of the trunk lid and sections off the RH from the LH sides....

Product#: 3853110

1964 Impala SS, Bel Air, Biscayne; Upper Trunk Lid Molding; Except Station Wagon

Reproduction of the original upper trunk molding designed for use with 1964 Impala SS, Bel Air, and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...

Product#: 748833

1964 Impala SS, Bel Air, Biscayne; Outer Tail Cove Moldings; with Hardware; Pair; except Station Wagons

Reproduction of the original outer tail cove moldings designed for use with 1964 Impala SS, Bel Air and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...

Product#: 3853109

1964 Impala SS; Bel Air; Lower Trunk Lid Molding; except Station Wagon

Reproduction of the original lower trunk molding designed for use with 1964 Bel Air, and Impala SS models. Each molding is manufactured in stamped aluminum replicating the original contour and factory design. Will replace the...

Product#: 748832

1964 Impala SS; Bel Air; Inner Tail Cove Moldings; with Hardware; Pair

Reproduction of the original inner tail cove moldings designed for use with 1964 Impala SS and Bel Air models. Each molding is manufactured in stamped aluminum replicating the original contour and factory design. Will replace...

Product#: SC6000

1960 Impala; Tail Light Panel Trim Moldings; Bright Finished Aluminum with Black Painted Details; LH and RH; Includes Clip Set

Reproduction tail light panel trim moldings for 1960 Impala models. This two piece molding set is manufactured from bright finished aluminum to factory specifications, each trim panel will fit and install as original offering...

Product#: *R1028

1962 Impala SS Trunk / Cove Panel Molding Kit

Reproduction rear deck panel molding kit for 1962 Impala SS models. These reproductions moldings and panels are manufactured to exact specifications. Kit includes: Upper trunk lid molding (Part # B223900) Outer cove panel...

Product#: *R1027

1962 Impala Trunk / Cove Panel Molding Kit

Reproduction rear deck panel molding kit for 1962 standard Impala models except station wagons. These reproductions moldings and panels are manufactured to exact specifications. Kit includes: Upper trunk lid molding (Part #...

Product#: SC6201

1962 Impala SS; Rear Trunk Panel Molding with End Caps; 3 Piece Set

Reproduction of the original rear panel trim moldings designed for use on 1962 Chevrolet Impala Super Sport models. This three piece molding set will replace the original worn out or missing originals. Manufactured to exact...

Product#: SC2202

1963 Impala; Rear Trunk Panel Molding and End Cap Set; Standard: 3 Piece Set

Reproduction of the original rear panel trim moldings designed for use on 1963 standard Chevrolet Impala models. This three piece molding set will replace the original worn out or missing originals. Manufactured to exact...

Product#: *R1200

1965 Chevrolet Impala; Rear Trunk Panel Molding Set; Standard

Reproduction of the original moldings designed for use on 1965 Chevrolet Impala models. Each molding is manufactured in stamped aluminum replicating the original in dimensions, appearance and fitment. Includes the trunk lip...

Product#: C16708

1967 Impala; Rear Trunk Molding; with Emblem and Bezel; 2 Door Hardtop; with Mounting Hardware

Reproduction of the original rear trunk molding for use with 1967 Impala 2 door hardtop models. Each molding is manufactured in quality stamped aluminum featuring the correct red/white/blue Bow Tie emblem and chrome bezel...

Product#: CM2463S

1965 Chevrolet Impala; SS Rear Panel Molding; Black & Gray; Made in the USA; GM Licensed

Reproduction of the original rear panel molding designed for use with 1965 Impala Super Sport models. Each molding is manufactured to factory specifications featuring correct "Chevrolet" and "Impala SS" emblems that match the...

Product#: C16708A

1967 Chevrolet Impala; Rear Trunk Molding; without Bezel, Emblem; 2 Door Hardtop Models

Reproduction of the original rear trunk molding for use with 1967 Impala 2 door hardtop models. Each molding is manufactured in quality stamped aluminum/ Replace the old, damaged, or original trunk lid molding with this...

Product#: CM2187

1962 Impala, Bel Air, Biscayne; Rear Body Grill; Each

Quality reproduction of the rear body upper grill panel designed for use with 1962 Impala and full size Chevrolet models. Each grill is manufactured to exact factory specifications. Fits and installas original. Add the...

Product#: MCA00010

1969-70 Impala; Caprice; Trunk Lip and Quarter Panel Extention Molding Set; Bright Finished Aluminum; 3 Piece Set

Custom trunk lid and quarter panel extension molding set for 1969-70 Impala or Caprice models. These moldings are manufactured from bright finished aluminum and match the profile of the body side molding. Set includes the...

Product#: CM2463D

1965 Chevrolet Impala; SS Rear Corner Molding; Black & Gray; LH; Made in the USA

Reproduction of the original rear panel corner molding designed for use with 1965 Impala Super Sport models. Each molding is manufactured to factory specifications that match the original in design, appearance, and fitment....

Product#: C6605

1966 Impala, Bel Air, Caprice; Rear Trunk Lid Molding

Reproduction of the original center trunk lid molding designed for use on 1966 Chevrolet Impala, Bel Air, and Caprice models. Each molding is manufactured to original factory specifications replicating the original design,...

Product#: B9096

1965 Impala, Bel Air; Rear Trunk Lip Molding

Reproduction of the original rear trunk lip molding designed for use with 1965 Chevrolet Impala and Bel Air models. Each molding is manufactured to correct factory specifications replicating the original in appearance and...

Product#: B231000

1964 Impala SS; Bel Air; Lower Trunk Lid Molding

Reproduction of the original lower trunk molding designed for use with 1964 Bel Air, and Impala SS models. Each molding is manufactured in stamped aluminum replicating the original contour and factory design. Will replace the...

Product#: B220000

1960 Impala / Full Size Trunk Molding

Reproduction of the original center trunk lid molding designed for use on 1960 Impala and full size models. Each molding is manufactured to exact factory specifications and designed to fit on the center of the trunk lid below...

Product#: SC6200

1962 Impala; Trunk Panel Molding; with End Caps; 3 Piece Set

Reproduction of the original rear panel trim moldings designed for use on 1962 standard Chevrolet Impala models. This three piece molding set will replace the original worn out or missing originals. Manufactured to exact...

Product#: SC2203

1963 Impala SS; Rear Trunk Panel Molding with End Caps; 3 Piece Set

Reproduction of the original rear panel trim moldings designed for use on 1963 Chevrolet Impala Super Sport models. This three piece molding set will replace the original worn out or missing originals. Manufactured in turned...

Product#: CM2463

1965 Chevrolet Impala; SS Rear Panel Molding; Black; Made in the USA; GM Licensed

Reproduction rear panel molding for 1965 Impala Super Sport models. Each molding is manufactured to factory specifications featuring correct "Chevrolet" and "Impala SS" emblems that match the original in design, appearance,...

Product#: CS6457

1964 Impala SS; Rear Cove Panel Molding Set; 3 Piece

Reproduction of the original rear cove panel moldings designed for use with 1964 Chevrolet Impala Super Sport models. Each molding is manufactured in quality stamped aluminum replicating the original in quality and design....

Product#: B9097

1965 Impala Full Size Rear Tail Cove Center Molding

This reproduction rear cove molding features the "Chevrolet" script logo. Excellent reproduction. Note: Script is stenciled on, not embossed like the original. Note: Requires 6 speed nuts for mounting. see part # 11502547.

Product#: CM2192

1962 Impala; Impala SS; Rear Cove Panel Chrome Molding Set; 7 Piece; Includes Swedging Tool.

Reproduction rear panel chrome trim bar components designed for use with 1962 Impala and Impala SS models. The center cove panel trim moldings are manufactured in quality die-cast zinc and chrome plated matching the original...

Product#: CM2463A

1965 Chevrolet Impala; SS Rear Panel Corner Molding; Black; RH; Made in the USA

Reproduction of the original rear panel corner molding designed for use with 1965 Impala Super Sport models. Each molding is manufactured to factory specifications that match the original in design, appearance, and fitment....

Product#: CM2463B

1965 Chevrolet Impala; SS Rear Panel Corner Molding; Black; LH; Made in the USA

Reproduction of the original rear panel corner molding designed for use with 1965 Impala Super Sport models. Each molding is manufactured to factory specifications that match the original in design, appearance, and fitment....

Product#: CX1862

1963 Impala, Impala SS; Upper Trunk Molding; with Chevrolet Lettering

Reproduction of the original upper trunk lid molding designed for use with 1963 Impala and Impala SS models. Fits on the rear upper section of the trunk lid. Each molding is manufactured in contoured and stamped correctly for...

Product#: B9092

1965 Chevrolet Impala; Rear Side Cove Moldings; RH and LH; Pair

Correct reproduction of the original Impala and full size Chevrolet rear side cover moldings designed for use on 1965 models. Each molding is a replica of the original style GM molding and replaces the worn out or damaged...

Product#: CM2463C

1965 Chevrolet Impala; SS Rear Corner Molding; Black & Gray; RH; Made in the USA

Reproduction of the original rear panel corner molding designed for use with 1965 Impala Super Sport models. Each molding is manufactured to factory specifications that match the original in design, appearance, and fitment....

Product#: B223650

1961 Impala Trunk Lid Molding

Original style reproduction replacements fit on the rear upper section of the trunk lid. Each is contoured and stamped correctly for a perfect fit. For use on standard and SS models. Note: These are t he left and right hand...

Product#: C6602

1966 Impala / Full Size Rear Corner Moldings

Reproduction rear corner side moldings for 1966 models. Used with the trunk lid molding Part # C6605 (sold separately) to finish off the rear moldings.

Product#: *R1030

1963 Standard Impala Trunk And Rear Cove Panel Molding Kit

Reproduction rear deck panel molding kit for 1963 standard Impala models except station wagons. These reproductions moldings and panels are manufactured to exact specifications. Kit includes: Upper trunk lid molding (Part #...

Product#: *R1031

1963 Impala SS Trunk And Rear Cove Panel Molding Kit

Reproduction rear deck panel molding kit for 1963 standard Impala models except station wagons. These reproductions moldings and panels are manufactured to exact specifications. Kit includes: Upper trunk lid molding (Part #...

Product#: *R1201

1965 Impala Super Sport; Rear Trunk and Cove Panel Molding Kit; Black

Reproduction of the original moldings designed for use on 1965 Chevrolet Impala Super Sport models. Each molding is manufactured in stamped aluminum replicating the original in dimensions, appearance and fitment. Molding kit...

Product#: *R1202

1965 Impala Super Sport; Rear Trunk and Cove Panel Molding Kit; Black and Gray

Reproduction of the original moldings designed for use on 1965 Chevrolet Impala Super Sport models. Each molding is manufactured in stamped aluminum replicating the original in dimensions, appearance and fitment. Molding kit...

Product#: K812

1963 Impala, Bel Air; Rear Corner Cove Moldings; with Hardware; Pair

Reproduction rear outer corner cove moldings for 1963 Chevrolet Impala, Bel Air, and Biscayne models. Manufactured in quality stamped aluminum to OE specifications. These polished aluminum moldings act as an extension of the...