Product#: 10243

1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Product#: 10630

1970-75 GM; Windshield Molding Clip; Each

Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...

Product#: A1010

1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green

This reproduction nylon molding clip will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...

Product#: K143

1962-64 Impala, SS, Bel Air; Back Glass Molding Clip Set

OER® reproduction of the original back window reveal molding clips set designed to fit 1962-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: C78

1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24

Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...

Product#: C78A

1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set

Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...

Product#: K142

1963-64 Impala, Bel Air; Windshield Molding Clip Set; 2 Door Hardtop

OER® reproduction of the original windshield reveal molding clips set designed to fit 1963-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: 9838109

1965-79 Buick, Chevrolet, Pontiac, Oldsmobile; Side Molding Clip; Each; Various Models

Correct style plastic stud mounted clip used on various 1965-79 GM vehicles. This clip was commonly used to attach the fender, door, and quarter panel side moldings on many GM vehicles. Also fits 1967-72 Chevrolet & GMC...

Product#: 4506041

1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each

Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...

Product#: 9895598

1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Product#: MN2103

Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set

Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...

Product#: 270070

1970-75 Camaro, Firebird, Impala, Caprice; Molding Clip Set; Windshield or Rear Window; 24-Pieces

Correctly configured windshield or rear window molding clips designed to install 1970-1974 windshield or back glass window molding sets on a variety of popular GM models. This 24-piece set of reproduction window molding clips...

Product#: B1422

1964 Impala; Bel Air; Trunk Split Molding Clip Set

The correct hardware can make a great difference in the finished look or your restoration. When mounting or replacing the trunk center split molding on your 1964 Impala or Bel Air model, use the correct clips for a proper...

Product#: 153733

1968-on GM; Molding Clip; Windshield, Quarter Window, Rear Window; Skylight; 14 Piece Set

Replacement style rear window glass molding installation clips for 1968-72 Chevy II and Nova models as well as a wide variety of additional GM models. Each clip is designed and manufactured to replicate the OE style clips...

Product#: B1418

1967-68 Impala; Back Glass Molding Clips; 17 Clip Set; Plus 5 Screws; 22-Pieces

Correct reproduction clips are now available for 1967-68 back glass moldings. When mounting the moldings on your 1967-68 full size Chevrolet, use the correct clips for a proper fit. Each set includes 17 clips, plus 5 screws....

Product#: B1421

1964 Impala; Quarter Panel Molding Clip Set; LH and RH Sides; 56-Pieces

The correct hardware can make a great difference in the finished look or your restoration. When mounting the quarter panel moldings on your 1964 Impala 2 door (all except 2 door SS), use the correct clips for a proper fit....

Product#: B1411

1964 Impala; Fender Molding Clips Set; 18 Clips, 18 Nuts; except SS Models

The correct hardware can make a great difference in the finished look or your restoration. When mounting the front fender moldings on your 1964 Impala (except SS models), use the correct clips for a proper fit. This set...

Product#: 270210

1972-85 GM; Molding Clip Set; For Windshield or Rear Window Molding; Steel; Set of 24

Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each clip set will provide a snug fit for the molding being attached. The amount of clips required for the job will...

Product#: *R13956

1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set

This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...

Product#: 153735

1975-90 GM, 1977-79 Nova; GM X-Body; Glass Molding Clip Set; Nylon; 14 Piece Set

Replacement style window glass molding installation clips for 1977-1979 Nova and GM X-body. Fits a wide variety of applications on other GM models, too. Each clip is designed to replicate OE style clips providing a snug fit...

Product#: 153738

1975-90 GM, 1977-79 Nova / X-Body; Windshield Molding Clip Set; Nylon Type; 14 Piece Set

Replacement style front window glass molding installation clips for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....

Product#: A5196

Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...

Product#: 378362S

1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack

Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...

Product#: 355785S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 353577S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 9639

1965-72 GM; Windshield, Back Window Molding Clip; Each

Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...

Product#: 11152

1975-81 GM, 1975-88 AMC; Windshield/Back Glass Molding Clips; 1-1/2" Wide X 1/2" Tall; White Nylon

Reproduction front window glass molding installation clip for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clip providing a snug fit for the molding. This clip...

Product#: 3886638

1962-1976 GM; Rocker Panel Molding Retainer; Each

This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water buildup between the rail and rocker...

Product#: 270209

1975-81 GM, 1975-88 AMC; Windshield/Back Glass Molding Clip Set; 1-1/2" x 1/2"; White Nylon; 24 pcs

Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clip set providing a snug fit for the...

Product#: 153732

1965-72 GM; Windshield, Quarter, Back Glass Molding Clip Set; 25 Piece Set

Oldsmobile Windshield Molding Clips: 1965-1968 442 (except convertible) 1965-1968 Ninety-Eight (except convertible) 1965-1968 Cutlass (except convertible) 1965-1968 Delta 88 (except convertible) 1967-1968 Delmont 88 (except...

Product#: 20631034

1980-90 Impala, Caprice, Cutlass, Lower Side Molding Clip; Each

Reproduction of the original lower side molding clip designed for use with various 1980-90 Caprice, Cutlass, Impala, and Parisienne models as listed. Each clips ia manufactured in quality injection molded nyton replicating...

Product#: *R749

1967-72 Buick, Chevy, Pontiac, Olds; Convertible Well Molding Clip; Convertible Well Molding Clip Set; 10 Piece Set

Reproduction of the original stamped convertible well molding clip set for use with various 1967-72 Buick, Chevrolet, Pontiac, and Oldsmobile convertible models as listed. These clips are designed and manufactured to secure...

Product#: 4884435

1963 Impala, Bel Air; Rear Corner Moldings Clip Set

Reproduction of the original rear cove molding clips for use with 1963 Impala and Bel Air models. Each clip is manufactured to OE specifications. Will install both RH and LH cove moldings. Set includes 12 clips and 12 nuts...

Product#: B1423

1966 Chevrolet; Impala; Impala SS; Fender Molding Clip Set; 14 Clips, 14 Nuts; LH and RH

The correct hardware can make a great difference in the finished look or your restoration. When mounting the fender moldings on your 1966 Impala or Impala SS, use the correct clips for a proper fit. {fitment}

Product#: B1420

1964 Impala; Door Molding Clip Kit; LH and RH Sides; 30-Pieces

The correct hardware can make a great difference in the finished look or your restoration. When mounting the door moldings on your 1964 Impala 2 door, use the correct clips for a proper fit. This set features the correct...

Product#: B1419

1964 Impala SS; Fender Molding Clips Set; 14 Clips; 14 Nuts

The correct hardware can make a great difference in the finished look or your restoration. When mounting the front fender moldings on your 1964 Impala SS, use the correct clips for a proper fit. This set features the correct...

Product#: A8448

1962-71 GM; Front & Rear Door Molding Fastener, Clip; 1" Long, White Nylon; Requires #8 Tapping Screw; Each

These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...

Product#: *R494

Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...

Product#: A9477

Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw

Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}

Product#: 375480S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 1/8 inch Stud; Fits 1/4 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: L13510C

1959 Impala; Complete Trunk Lid Molding Trim Clip Set; Convertible; 4-Door Hardtop; 4-Door Sedan

Replacement complete trunk lid molding clip set for 1959 Impala convertible; 4-Door hardtop and Sedan models. This high quality clip set features the correct size replacement clips to install the LH and RH trunk lip moldings,...

Product#: L13526

1960 Impala; Bel Air; Upper Door and Quarter Panel Spear Molding Clip Set; 2-Door Models; 28 Replacement Style Clips; Does Both Sides

Replacement upper door and quarter panel spear molding clip set for 1960 Impala 2-door models. This high quality clip set features the correct size replacement clips to install the LH and RH upper door and quarter panel...

Product#: B9078

1964 Chevrolet Impala; Exterior Body Side Molding Hardware Set; 2 Door Models

Reproduction and replacement style clips and hardware designed to install the exterior side moldings on 1964 Impala 2 door models. This hardware set includes all the necessary hardware to install a complete set of exterior...

Product#: B1426

1966 Impala / Full Size Side Molding Clips Set

The correct hardware can make a great difference in the finished look or your restoration. When mounting all of the side panel moldings on your 1966 full size Chevrolet, use the correct clips for a proper fit. Includes clips...

Product#: B9215

1962 Chevrolet Impala; Exterior Body Side Molding Clip Set

Reproduction and replacement style clips and hardware designed to install the exterior side moldings on 1962 Chevrolet Impala models. This set includes all the necessary hardware to install a complete set of exterior side...

Product#: B226000

1963 Impala / Impal SS Lower Trunk Molding With Clips

Reproduction upper trunk lid molding for 1963 Impala models. Fits on the rear lower section of the trunk lid. This molding is contoured and stamped correctly for a perfect fit on standard and Super Sport models. Note: For...

Product#: B14215

1964 Chevrolet; Impala SS; Body Side Molding Clip Set; 2-Door; LH and RH; Original Style

Reproduction body side molding clips and hardware used to mount an Impala SS body side molding kit. Includes correct quarter molding clips and screw-in style door molding end clips. {specs} {fitment}

Product#: L13004

1961-64 Impala; Bel Air; Biscayne; Back Glass Reveal Molding Clip Set; 2/4-Sedan; 22 Piece

Reproduction back glass reveal molding clip set for 1961-64 Impala, Bel Air and Biscayne 2/4-door sedan models. This high quality clip set features the correct length clips to install the rear window moldings. These clips are...

Product#: L13512

1960 Impala; Back Glass Complete Reveal Molding Clip Set; 2-Door Hardtop

Replacement back glass reveal molding clip set for 1960 Impala 2-door hardtop models. This high quality clip set features the correct size replacement style fasteners and clips to install the upper rear glass molding, the...

Product#: L13511

1959 Impala; Back Glass Complete Reveal Molding Clip Set; 2-Door Hardtop

Replacement back glass reveal molding clip set for 1959 Impala 2-door hardtop models. This high quality clip set features the correct size replacement style fasteners and clips to install the upper rear glass molding, the...

Product#: L13040P

1959-64 Impala; Convertible; Windshield Header Molding Clips Set; 4 Piece

Replacement upper windshield header molding clip set for 1961-64 Impala convertible models. These clips fasten the convertible windshield stainless steel trim to the top of the windshield frame. 4-piece set. {specs} {fitment}

Product#: CS6375

1963 Impala; Door Molding Clip and Hardware Set

Reproduction of the original clips and hardware used to install door moldings on 1963 Impala, Bel Air, and Biscayne models. Each hardware set includes all the necessary components to install both RH and LH exterior door...

Product#: MC56759

1959-1960 Buick, Chevy, Pontiac, Oldsmobile; Front Windshield Molding Clip Set; 2/4 Door Sedan, Station Wagon; 38 Piece Set

Reproduction of the original factory-style replacement windshield molding clips designed for use on 1959-60 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size 2 or 4 door models including station wagons. This...

Product#: CX5030

1959 Impala / Full Size 11 Piece Fin Molding Clip Set; Replaces GM# 4753375

Reproduction of the clips used to attach the rear side fin molding on 1959 full size Chevrolet models. This set of 11 clips will mount one fin molding. 2 required per vehicle.

Product#: L13540

1959 Impala; Bel Air; Biscayne; Hood Lip Molding Clip Set; LH and RH

Replacement hood lip molding clip set for various 1959 Impala, El Camino and other Chevrolet full size passenger car models. This high quality clip set features the correct size replacement clips to install the LH and RH hood...

Product#: L13507

1959 Impala; Trunk Split Molding Clip Set; 2-Door Hardtop

Replacement trunk split molding clip set for 1959 Impala 2-door hardtop models. This high quality clip set features the correct size replacement clips to install the trunk split molding. 4-piece set. {specs} {fitment}

Product#: B6807

1968 Chevrolet Impala; Side Molding Clip Set;

Reproduction of the original body side molding clips to install the side moldings on 1968 Chevrolet Impala 2-door models. This hardware set is includes the correct clips to install side moldings on RH and LH sides. 1 set...

Product#: L13384

1960 Impala; Bel Air; Biscayne; Trunk Fin Molding Clip Set; 3 Clip Set; LH or RH

Replacement trunk fin molding clip set for 1960 Impala, Bel Air and Biscayne 2/4-door hardtop, sedan and convertible models. This high quality clip set features the correct size replacement clips to install the LH or RH trunk...

Product#: L13385

1959 Impala; Bel Air; Biscayne; Center Trunk Emblem to Fin Molding Clip Set

Replacement center trunk emblem molding clip set for 1959 Impala, Bel Air and Biscayne 2/4-door hardtop, sedan and convertible models. This high quality clip set features the correct size replacement clips to install the...

Product#: L13508

1959 Impala; Trunk Split Molding Clip Set; Convertible; 4-Door Hardtop; 4-Door Sedan

Replacement trunk split molding clip set for 1959 Impala Convertible, 4-door hardtop and 4-door sedan models. This high quality clip set features the correct size replacement clips to install the trunk split molding. 3-piece...