Product#: 10243

1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Product#: 10630

1970-75 GM; Windshield Molding Clip; Each

Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...

Product#: *R1024

1964 Impala SS; Trunk and Rear Cove Panel Molding Kit; without Trunk Spear

Reproduction of the original rear deck panel molding kit designed for use 1964 Impala SS models. Each molding is manufactured to correct OE specifications replicating the original in every detail. Note: Chevrolet emblem sold...

Product#: B1441

1972-75 Impala 2 Door, 4 Door, Except Wagon; Wheel Opening Molding Set; Front & Rear; Set of 4

Reproduction wheel opening moldings for 1972-75 Impala models except wagon. Each molding is stamped to original factory specifications with correct contours and finish for an original appearance and fit. Each set includes 2...

Product#: A1010

1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green

This reproduction nylon molding clip will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...

Product#: K143

1962-64 Impala, SS, Bel Air; Back Glass Molding Clip Set

OER® reproduction of the original back window reveal molding clips set designed to fit 1962-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: *R1025

1964 Chevrolet Impala; Trunk And Rear Cove Panel Molding Kit; with Trunk Spear

Reproduction of the original style rear deck panel moldings desogned for use with 1964 Chevrolet Impala standard models except station wagons. Each molding is manufactured to correct factory specifications for an authentic...

Product#: 3799051

1962 Impala, Biscayne, Bel Air; Hood Lip Molding; with Chevrolet lettering; GM Licensed

Reproduction of the original hood lip molding designed for use with 1962 Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high grade aluminum replicating the original molding for an authentic...

Product#: K115

1964 Impala, Bel Air, Biscayne; Outer Grill Eyebrow Moldings; RH and LH; Pair

Reproduction of the original front fender lower eyebrow (outer grill) moldings designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is a replication of the original GM eyebrow molding found on...

Product#: K12567

1967-68 Impala; Impala SS; Rear Window Molding Set; Polished Stainless Steel; 2-Door Hardtop; 5-Piece Set

Reproduction od the original rear window moldings for use with 1967-68 Chevrolet Impala SS 2-door hardtop (fastback) models. Manufactured in quality stainless steel to original factory specifications offering an original...

Product#: C78

1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24

Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...

Product#: 986561

1966 Impala, Caprice; Hood Spear Molding; with Hardware

OER® reproduction of the original hood spear molding designed for use on 1966 Impala and Caprice models. Each molding is reproduced to exact specifications and manufactured in a polished zinc die-cast material for an...

Product#: 986188

1965 Impala, Bel Air, Biscayne; Hood Spear Molding

OER® reproduction of the original hood spear molding designed for use on 1965 Impala and Ful Size Chevrolet models. Each molding is produced to match the original in quality, fit and appearance. Each molding is precision...

Product#: K142

1963-64 Impala, Bel Air; Windshield Molding Clip Set; 2 Door Hardtop

OER® reproduction of the original windshield reveal molding clips set designed to fit 1963-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: C2367

1966 Impala, Bel Air, Caprice; Wheel Openining Molding Kit; Front & Rear; with Hardware; Set of 4

Reproduction of the original wheel opening moldings designed for use on 1966 Impala Bel Air, and Caprice models. Each molding is stamped to original factory specifications with correct contours and finish for an original...

Product#: C78A

1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set

Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...

Product#: K123

1962-64 Impala, 1962 Bel Air; Rear Back Glass Molding Set; 2 Door, Hardtop; 5 Piece Set; OER

OER® reproduction of the original back glass molding set designed for use on 1962 Bel Air 2 door hardtop, 1962-64 Impala, and Impala SS, 2-door hardtop models. Each set of back glass moldings is designed to replace the...

Product#: K124

1965-67 Impala, Caprice 2-Door Hardtop; Windshield Molding Set; 5 Piece

Reproduction front windshield reveal molding set for 1965-67 Impala and 1966-67 Caprice models. Each molding is an exact replica of the original.  Manufactured in polished stainless steel to factory specifications, each...

Product#: 9838109

1965-79 Buick, Chevrolet, Pontiac, Oldsmobile; Side Molding Clip; Each; Various Models

Correct style plastic stud mounted clip used on various 1965-79 GM vehicles. This clip was commonly used to attach the fender, door, and quarter panel side moldings on many GM vehicles. Also fits 1967-72 Chevrolet & GMC...

Product#: 4506041

1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each

Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...