Product#: 3745991

1958-67 Chevrolet; Brake Pedal Pad with AutoTrans & Manual Brakes; Various Models

Reproduction of the original brake pad for use on various GM models including the passenger cars listed below with automatic transmissions and manual brakes. Not for use on passenger cars originally equipped with power...

Product#: 3881784

1958-70 Corvette, Impala, Bel Air, Biscayne, Caprice, Nova; Brake Pedal Pad; with Auto Trans; OER

Reproduction of the original brake pedal pad designed for use with 1958-70 Chevrolet Corvette, Impala, Bel Air, Biscayne, Caprice, and various other models with automatic transmissions. Each pad is manufactured in quality...

Product#: 153502

1973-2002 Buick, Chevrolet, GMC, Pontiac, Oldsmobile;; Brake Pedal Pad; with Auto Trans; Various Models

Reproduction of the original style brake pedal pad for use with various 1973-2002 GM vehicles. Manufactured in quality EPDM rubber to factory specifications featuring the correct shape, size and horizontal pattern for a...

Product#: 3746702

1958-67 Chevrolet; Brake Pedal Pad; with Auto Trans & Power Brakes

Reproduction of the original brake pedal pad designed for use on 1958-67 GM passenger cars with auto trans and power brakes. Each pad is manufactured to factory specifications in hard rubber and features the correct ribbed...

Product#: 154822

Universal Frame Mount Manual Brake Pedal Assembly

Frame mount brake pedal assembly for power brake applications. Powder coated in black, each kit comes with pedal pad to complete the assembly. Includes black powder coated brake pedal rod, brake pedal pad and hardware. For...

Product#: 153660Z

3/8"-24 Brake Pedal Clevis; Zinc Plated

Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is zinc...

Product#: 3988288

1971-76 Chevy, GMC, Oldsmobile; Disc Brake Pedal Pad; with Automatic Trans; Various Models

OER® reproduction of the original disc brake pedal pad designed for use on various GM models with automatic transmission. Each pedal pad is manufactured in EPDM rubber to factory specifications and replicates the original...

Product#: 153651

Brake Pedal Rod Extension; 4-3/4"; Zinc Plated; Universal Fit

Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod can be cut to your desired length if necessary. Rod measures 4-3/4"...

Product#: C2374

1965-70 Impala, Bel Air, Caprice; Park Brake Pad Trim Plate

Reproduction of the original park brake trim plate designed for use with 1965-70 Impala, Bel Air, Caprice, and full size models including station wagons. Fits directly over park brake pad and offers a customized appearance....

Product#: 153661

Brake Pedal Rod Extension; 1-1/2" with 3/8" hole; Zinc Plated

Brake pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 1-1/2" overall, hole size is 3/8" on the end, 3/8'-24 threads. Comes...

Product#: 154230

Universal Pedal Rod Extension; 3/8"-24; Extends 6-1/2 to 7-1/2"

Universal fit Pedal Rod Extension with a 3/8-24" thread size commonly used on various classic truck applications to extend the pedal to 6-1/2 to 7-1/2 inches in length. Features grease fitting to keep coupler properly...

Product#: 153660C

Brake Pedal Clevis; Chrome Plated; 3/8"-24

Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is chrome...

Product#: 154233

3/8"-24 Push Rod Extension; 4-3/4" Long; Female / Male Thread

Universal fit Pedal Rod Extension with a 3/8-24" thread size rod that is commonly used on various classic car applications to extend the pedal to 4-3/4 inches in length. Features male / female ends.

Product#: B199450

Billet Specialties 1955-67 Billet Aluminum Power Brake Pedal Pad - Polished

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install.

Product#: B199455

Billet Specialties 1955-67 Billet Aluminum Power Brake Pedal Pad - Black

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install.

Product#: BG6141

1958-65 Fullsize Lokar Billet Brake Pedal Pad w/Auto Trans - Curved Style - Black w/Rubber Inserts

Lokar's Curved style brake pedal pad cover made from billet aluminum adds style and function to your classic car. Designed with hidden screws, these pads match and bolt directly to the factory steel pedal. No drilling is...

Product#: BG6005

Lokar Black Anodized Billet Aluminum Standard Size 2" x 3" Brake Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: BAG6005

Lokar Billet Aluminum Standard 3" x 2" Brake Pedal Pad with Rubber Inserts

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: BG6013

Lokar Black Anodized Billet Aluminum Extra Large 2-3/4" X 3-3/4" Brake Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: B199645

Billet Specialties Billet Aluminum E-Brake Pedal Pad - Polished

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install. Applications 1958-64 Bel Air,...

Product#: W20641

1965-70 Brake and Clutch Pedal Pad - with Deluxe Interior

Reproduction of the original brake and clutch pedal pad for use with 1965-70 Impala and full size Chevrolet passenger models with a manual transmission and deluxe interior. Each pad is manufactured in quality rubber to exact...

Product#: W20651

1958-65 Chevrolet Brake Pedal Pad - with Man Trans - Power Brake

Reproduction of the original brake pad for use with 1958-65 passenger cars with manual transmissions and power brakes. Each brake pad is manufactured in heavy rubber material that replicates the original brake pad. Includes...

Product#: TF500237

1955-58 Brake Pedal Return Spring

Reproduction brake pedal spring for 1958 Chevrolet models. Manufactured from spring steel with correct tension to return your pedal to the proper position. Fits: 1958 Chevrolet full size

Product#: 90197

Polished Aluminum Brake Pedal Pad

This brake pad features two 1/2" x 20 female holes on the back?one centered and one off-center?allowing for flexible placement to suit your specific installation needs. This design ensures easy alignment and adaptability,...

Product#: 3820328

1958-1967 Chevrolet; Floor Mounted Accelerator Pad; Molded Plastic; Various Models

OER® reproduction of the original accelerator pedal pad designed for use on various GM models from 1958-67, including 1958-64 Impala, Bel Air, Biscayne, full-size models, and 1962-67 Chevy II/Nova models. This accelerator...

Product#: K1448

Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set

Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...

Product#: MT80899P

1965-66 Impala, Caprice, Bel Air, Biscayne; Pedal Assembly Set; Brake & Clutch

Reproduction clutch and brake pedal assembly for 1965-66 Chevrolet Impala and full-size models. This brake and clutch pedal assembly is manufactured in quality stamped steel construction that closely replicates the original...

Product#: 3744748

1958-63 Impala, Bel Air, Biscayne, 1958-62 Corvette; Brake and Clutch Pedal Pad; with Manual Trans; Each; Various Models

Reproduction brake and clutch pedal pad for various 1958-63 Chevrolet Corvette, Impala, Bel Air, and Biscayne models with manual transmissions. Each pedal pad is manufactured in EPDM rubber to factory specifications and...

Product#: 346381

1971-91 GM; Brake and Clutch Pedal Bushing Set; Nylon; for 5/8" Diameter Shaft; 1/2" Deep; 2-Piece Set

Reproduction of the commonly worn out nylon pedal bushings designed for use with a variety of 1971-1991 GM car and truck models as listed. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft...

Product#: MT12801P

1963-64 Impala, Biscayne, Bel Air; Pedal Assembly Set; Brake & Clutch

Reproduction clutch and brake pedal assembly for 1963-64 Chevrolet Impala, Biscayne, and Bel Air models. This brake and clutch pedal assembly is manufactured in quality stamped steel construction closely replicating the...

Product#: 154237

Universal Adjustable Master Cylinder Pushrod Kit; 3/8"-24 Thread; With Ford Style Eyelet; For Power or Manual Brakes

Adjustable master cylinder pushrod with 3/8-24" thread size rod that is commonly used on various classic Ford and Mercury applications. Features Ford style eyelet with bushing. Fits Mustang, Cougar among other applications....

Product#: BG6012

Lokar Black Anodized Aluminum Throttle Assembly X-Large 2" x 5" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: BG6140

1958-65 Fullsize Lokar Manual Trans Brake/Clutch Pedal Pads - Curved Style - Black w/Rubber Inserts

Lokar's Curved style brake & clutch pedal pad made from billet aluminum adds style and function to your classic car. Designed with hidden screws, these pads match and bolt directly to the factory steel pedal. No drilling is...

Product#: BAG6002

Lokar Billet Aluminum Standard 3" x 2" Brake Pedal Pad with Ball Milled Finish

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: B199345

Billet Specialties Billet Aluminum Clutch or Brake Pedal Pad - Black

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install. Applications 1958-64 Bel Air,...

Product#: B199340

Billet Specialties Billet Aluminum Clutch or Brake Pedal Pad - Polished

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install. Note: Replaces factory pad.

Product#: G8545

1959-94 GM; Brake & Clutch Pedal Pivot Bushing; Each

Genuine GM brake and clutch pedal bushing for various models. This small bushing is essential to keep the clutch pedal in the proper location. A commonly worn out part which requires replacement periodically. Will fit most GM...

Product#: 3828427

1962-81 GM; Brake Pedal Shaft Pin; Various Models

Accurate reproduction of the brake pedal pin for vehicles with automatic transmission. Quality heat treated material and plated for corrosion resistance. Measures 5/8" Diameter. Refer to GM Group #: 4.634 and original GM Part...

Product#: 154238

Universal Master Cylinder Pushrod Kit; ; Adjustable; 3/8"-24 Thread; Manual Brakes

Adjustable master cylinder manual brake pushrod with 3/8-24" thread size rod that is commonly used on various classic Ford and Mercury applications when converting to dual master cylinder with manual brakes. Kits includes:...

Product#: *HC453

1967-69 Camaro / Firebird; Automatic Transmission Brake Pedal Retaining Pin

Reproduction of the original automatic brake pedal retaining pin for 1967-69 Camaro/Firebird models. This pin holds the brake pedal to the housing under the dash. Manufactured from hardened steel like original and includes...

Product#: BAG6140

1958-65 Fullsize Lokar Manual Trans Brake/Clutch Pedal Pads - Curved Style - Brushed w/Rubber Insert

Lokar's Curved style brake & clutch pedal pad made from billet aluminum adds style and function to your classic car. Designed with hidden screws, these pads match and bolt directly to the factory steel pedal. No drilling is...

Product#: SG6008

Lokar Chrome Steel Standard 3" x 2" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: BFG6013

Lokar Billet Aluminum Xtra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: BFG6011

Lokar Brushed Billet Aluminum Xtra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Ball Milled Finish

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: PT10

1963-84 Buick, Chevrolet, Oldsmobile, and Pontiac; Brake & Clutch Pedal Shaft Retaining Clip

Reproduction clutch pedal pin clip for 1963-84 GM vehicles with manual transmissions and 5/8" pin on automatic trans models. This retainer clip holds the pin which holds the clutch and brake pedals to the housing under the...

Product#: SG6017

Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: TF300227

1942-81 Chevrolet, Pontiac; Brake and Clutch Pedal Rubber Bumper Set; Pair

Reproduction brake and clutch pedal rubber bumpers for various GM models from 1947-1981. Each bumper is designed and manufactured to replicate the original for a perfect replacement. Includes 1 brake and 1 clutch pedal...