Product#: BP4023

1970-90 Front Disc Brake Backing Plate; Drivers Side

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 Chevrolet, Buick, Oldsmobile and Pontiac models. The backing plate will help to keep brake pad dust from contaminating...

Product#: 154898

1974-78 Ford Mustang II; Caliper Bracket Set; Cast Iron; for Stock Height or 2" Drop Spindles; Pair

Our Mustang II caliper brackets are built from cast iron for superior strength. Designed to install on Stock or 2" drop spindles from a 1974-1978 Mustang II coupled with 1978 and newer GM calipers, sold separately. Will fit...

Product#: *R7081

1970-90 Front Disc Brake Backing Plate; Pair

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 GM models. The backing plate will help to keep brake pad dust from contaminating front suspension components. Sold in...

Product#: 153646

1955-58 Bel Air, Impala; Disc Brake Caliper Brackets for OE Spindles; for Large GM Calipers

These disc brake spindle brackets will work with the stock spindles on full size Chevrolet models from 1955-58. Use these to upgrade to front disc brakes using 11" GM rotors and large GM calipers from 1970-78 Camaro models....

Product#: BP4024

1970-90 Front Disc Brake Backing Plate; Passenger Side

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 Chevrolet, Buick, Oldsmobile and Pontiac models. The backing plate will help to keep brake pad dust from contaminating...

Product#: 153645

1955-64 Chevrolet Bel Air Impala; Disc Brake Caliper Brackets; OE Spindles; w/Small GM Calipers

These disc brake spindle brackets will work with the stock spindles on full size Chevrolet models from 1955-64. Use these to upgrade to front disc brakes using 11" GM rotors and small GM calipers from intermediate GM models....

Product#: E226

1968-96 1 Piston Caliper Mounting Bolt

Reproduction of the original caliper mounting pins for single piston calipers. Sold as a pair. One pair per caliper required. Applications: 1969-81Camaro models 1969-81Firebird models 1968-96 Impala / full size models except...

Product#: BH400103

1951-58 Chevrolet Rear Only Brake Hardware Set For Original Style Brakes

This complete kit contains the necessary hardware you need to do your brake job right. Kit includes hold down springs, return springs and all the hardware to get those brakes working properly. Each kit includes all hardware...

Product#: H2311

1955-58 Chevrolet Front Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for front only.

Product#: H2316

1955-70 Bel Air, 150, 210, Impala, Biscayne Caprice; Brake Drum Anti-Vibration Spring

Lose the anti-vibration spring on your classic full size Chevys? Replacement springs available for 1958-1970 full size cars. Spring fits in the groove around 11" drums. 4 required per vehicle. {fitment}

Product#: 393706

7/16" X 20 Brake Line Hose Bolts and Washer Set

Specially drilled bolt that secures the brake line to the caliper. Includes 2 bolts and 4 washers (gaskets).

Product#: H2320

1979-84 GM - Rear Drum Brake Spring Set

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Product#: H2322

1985-97 Rear Drum Brake Spring Set

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Product#: BH400102

1951-58 Chevrolet Front Only Brake Hardware Set For Original Style Brakes

This complete kit contains the necessary hardware you need to do your brake job right. Kit includes hold down springs, return springs and all the hardware to get those brakes working properly. Each kit includes all hardware...

Product#: H2533

1964-78 Drum Brake Adjuster Set RH

This kit includes the brake shoe adjustment sprocket, brake shoe upper retainer and the adjustment plate. Fits 1964-78 front or rear right hand side

Product#: H2317

1959-62 Impala / Full Size, 1956-62 Corvette; Drum Brake Hardware Set; Front

Rebuilding or replacing your brakes doesn't have to be a painful experience. Completely replace worn-out or missing springs and bring your brakes back to proper working condition. {fitment} NOTE: Video is for illustration...

Product#: J1141

Brake Adjuster Hole Plug Set; 1-1/4" Tall x 9/16" Long x 7/16" Thick; 4-Pieces

Reproduction brake adjuster hole cover / plug for a wide range of GM models including all 1947-91 GM truck models with drum brakes. 1 required for each drum brake assembly. Sold as a set of 4. Measures approximately 1-1/4" X...

Product#: TF500114

1956-62 Chevrolet; Brake Hardware; without Adjusters; Front Or Rear 1 Axle

Set contains hardware for a brake job in front or rear, for 1 axle only. 2 sets required for complete car. Set includes hold down springs, return springs and miscellaneous hardware. Does not include adjusters. For use on...

Product#: BH400116

1951-64 Chevrolet Drum Brake Shoe Guide Plate

Replacement brake shoe guide plate for all 1958-64 Chevy full size models not equipped with disc brakes.

Product#: H2590

79-83 Drum Brake Adjuster LH

This drum brake self-adjuster repair kit for the rear LH (left hand) side is manufactured and tested to the strictest OE standards for unparalleled performance. Built for trouble-free ownership and 100% visually inspected and...

Product#: H2591

79-83 Drum Brake Adjuster RH

This drum brake self-adjuster repair kit for the rear RH (right hand) side is manufactured and tested to the strictest OE standards for unparalleled performance. Built for trouble-free ownership and 100% visually inspected...

Product#: BH400115

1953-58 Chevrolet 2 Piece Master Cylinder Banjo Fitting Gaskets

Master cylinder banjo fitting gasket set for 1955-58 Chevy fullsize models. These copper gaskets install at the end of the master cylinder banjo fitting on both side of the brass block. Each set includes 2 copper gaskets.

Product#: A12703

Prevailing Torque Lock Nut; 5/8"-11; USS; Grade 8; Cadmium Plated

Prevailing Torque Lock Nut; 5/8"-11; USS; Grade 8; Cadmium Plated. Sold individually. Specifications: Style: Hex Size: 5/8 in.-11 Across Flats: 10 Grade: 8 Finish: Cadmium and Wax Country of Origin: United States

Product#: H2319

1964-78 GM - Rear Drum Brake Spring Set

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Product#: H2310

1955-58 Chevrolet Front And Rear Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for front and rear.

Product#: H2313

1959-70 Impala / Full Size Front And Rear Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for front and rear.

Product#: BH400101

1951-58 Chevrolet Front And Rear Brake Hardware Set For Original Style Brakes

This complete kit contains the necessary hardware you need to do your brake job right. Kit includes hold down springs, return springs and all the hardware to get those brakes working properly. Each kit includes all hardware...

Product#: H2315

1959-70 Impala / Full Size Rear Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for rear only.

Product#: H2312

1955-58 Chevrolet Rear Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for rear only.

Product#: G1429

1971-91 GM Disc Brake Backing Plate; LH

GM type front disc brake backing plates which are commonly known as dust shields. These backing plates will help to keep road debris away from your truck's calipers and rotors. Applications: 1971-86 C Series 1/2 Ton 2WD P...

Product#: L06009P

1955-64 Bel Air; Impala; Biscayne; Front Brake Shoe Anchor Bolt Pin with Butterfly Guide Plate; LH or RH

Reproduction front brake shoe anchor bolt and butterfly guide plate for 1955-64 Chevrolet passenger car models. This high quality anchor bolt is manufactured to factory specifications. LH or RH. {specs} {fitment}

Product#: Y06006P

1965-70 Impala; Caprice; Bel Air; Biscayne; Front Brake Shoe Anchor Bolt Pin with Butterfly Guide Plate; LH or RH

Reproduction front brake shoe anchor bolt and butterfly guide plate for 1965-70 Chevrolet passenger car models. This high quality anchor bolt is manufactured to factory specifications. LH or RH. {specs} {fitment}

Product#: H2314

1959-70 Impala / Full Size Front Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for front only.

Product#: H2318

1959-62 Impala / Full Size Rear Drum Brake Hardware Set

Rebuilding or replacing your brakes doesn't have to be a painful experience. Completely replace worn-out or missing springs and bring your brakes back to proper working condition.

Product#: 5460399

Brake Shoe Guide Plate

Correct replacement shoe guide for all front and rear drum brake applications. This plate holds the top of the brake shoes in place. 2-15/16" o.l. x 7/64" thick.

Product#: H2532

1964-78 Drum Brake Adjuster Set LH

This kit includes the brake shoe adjustment sprocket, brake shoe upper retainer and the adjustment plate. Fits 1964-78 front or rear left hand side

Product#: D9402

1969-96 GM - Outer Front Caliper O-Ring Bushing

AC Delco replacement outer O-ring bushing which the caliper bolt and bushings goes through when installed. For use on single piston caliper disc brake models. Sold individually. 4 required. Applications: 1969-96 Camaro with...

Product#: 393705

10MM Brake Line Hose Bolt Set

Specially drilled bolt that secures the brake line to the caliper. Includes 2 bolts and 4 washers (gaskets).

Product#: H40192

1964-77 GM - Rear Drum Brake Shoe Retaining Set

Rear retaining pins, springs and cups for models with 9-1/2" drum brakes. Sold as a wheel set. Applications: 1967-81Camaro 1965-72 Chevelle 1965-72 El Camino 1967-97 Firebird 1977-96 Impala 1977-96 Caprice 1964-79 Chevy II /...

Product#: DPA85007

1967-70 GM Models; Front Aluminum Caliper Piston

Rebuilding your disc brake calipers? Don't forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

Product#: H5404

1968-96 Front Disc Brake Pad Retainer Clip

Recommended replacement whenever replacing your front disc brakes. 2 required. Clip on type.

Product#: G6579K

1967-81 Camaro; Firebird; Impala; Nova and Other GM; bBrake Bleeder Screw Set; Black Phosphate; 24 Pieces

Reproduction brake bleeder screw set for various 1967-81 GM models with front disc brakes. This high quality bleeder screw set features the correct size original style bleeders with the correct finish. Includes (2) for the...

Product#: F73183S

1963-76 Impala / Full Size Rear Drum Hold Down Kit

Replacement rear drum brake shoe hold down set fo 1963-76 Chevrolet full size models except 1971-76 station wagons.

Product#: D9405

1968-84 Caliper Bolt Sleeve

The caliper bolt allows the caliper assembly to float. Worn or damaged sleeves and bolts can be noisy and dangerous. These sleeves are designed for all brake systems.

Product#: H7104

1964-2003 Front / Rear Drum Brake Spring Set; Various GM Models

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Product#: A9162

5/8-11 X 2-1/2" Grade 8; Hex Head Bolt; Yellow Zinc Chromate

5/8-11 X 2-1/2" Grade 8; Hex Head Bolt; Yellow Zinc Chromate. Sold individually. Specifications: Head Style: Hex Size: 5/8 in.-11 Across Flats: 10 Grade: 8 Strength: 150,000 PSI Minimum Material: Medium Carbon Alloy Steel...

Product#: D9367

1975-85 Drum Brake Adjusting Screw; GM Models

Drum Brake Adjusting Screw {fitment}

Product#: F0150

1/2"-20 X 1-1/2" Grade 8 Zinc Yellow

Product#: F0275

1/2"-20 x 2-3/4" Hex Grade 8 Zinc Yellow

Product#: F315050

1/2"-20 Zinc lock nut

Product#: *K9142

Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head

3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}

Product#: 24912030

1965-70 Chevrolet Impala, 69-82 Corvette; Wilwood Front Disc Brake Caliper Brackets; for 11" Rotors

Wilwood disc brake caliper bracket kit for 1967-70 Impala/full size models using Wilwood Dynalite Pro Series front disc brake kit with hub and 11" vented rotors. Applications: 1965-70 Impala/full size with Wilwood Dynalite...

Product#: BRK3179T

1958-64 Chevrolet; Impala; Rear Disc Brake Caliper Mounting Brackets; Fits Ford Large Axle 9" Rear Ends; (New Torino Style)

Rear disc brake conversion caliper mounting brackets for 1958-64 Chevrolet full size passenger car models using a Ford 9-inch rear end with the large bearing Torino Style axle flange, (bolt spacing 2" x 3.562"). {specs}...

Product#: K0103

1965-81 GM; Disc Brake Bleeder Screw Set; Factory Style; With Front Brake Dust Caps

Reproduction bleeder screws for various 1967-74 GM models as listed. Includes front brake plastic dust caps. Designed for bleeding brakes. Includes set of 6 screws. {fitment}

Product#: D91001

1969-96 GM Cars & Trucks - Inner Front Caliper O-Ring Bushing (Inboard)

ACDelco replacement inner O-ring bushing which the caliper bolt and bushings goes through when installed. For use on single piston caliper disc brake models. Sold individually. 4 required. Applications: 1982-87 Buick Regal...

Product#: 1409053D

1979-85 Chevrolet Impala, Camaro, Firebird; Wilwood Dynalite Big Brake Front Hub Set; 12.19" HP Drilled/Slotted Rotors; Black Caliper

SL6 billet six-piston calipers with 13" or 14" rotors deliver the ultimate combination for braking power and style in this group of sets engineered for traditional non-ABS spindles on American muscle cars. Built exclusively...

Product#: 1409053

1979-85 Chevrolet Impala, Camaro, Firebird; Wilwood Dynalite Big Brake Front Hub Set; 12.19" HP Plain Rotors; Black Caliper

SL6 billet six-piston calipers with 13" or 14" rotors deliver the ultimate combination for braking power and style in this group of sets engineered for traditional non-ABS spindles on American muscle cars. Built exclusively...

Product#: G5181

1970-96 Disc Brake Backing Plate Gasket

Original GM gasket. The gasket inserts between the steering knuckle and backing plate. Helps eliminate noise or squeaking when applying the brakes. Sold individually. Applications: 1970-81 Camaro 1970-81 Fir ebird 1971-96...

Product#: 1253510

1964-72 GM; Disc Brake Conversion Spindle Nut Set; 18 Pieces

This 18-piece hardware set includes the front rotor and spindle nuts, washers, pins necessary to hold the rotor or drum to the spindle, spindle to the upper/lower control arms and the spindle to the end link. For use with...

Product#: 1253565

1979-88 GM; Brake Line Hose Bolt Set; Factory Correct 5/8" Head; Style 2; 10MM X 150

This set is correct for the 1978-81 A/F/X Body single piston banjo bolts with the factory correct 5/8" head. Includes 4 crush washers. IMPORTANT: Make sure to check the size of the banjo bolt. GM used two different bolts:...