Product#: B1711

1963 Impala / Full Size 4 Piece Rear Bumper Bracket Set

Correct reproduction of the original rear bumper bracket set designed for use on all 1963 Impala, Bel Air and Biscayne models. Replace your original bent brackets with these reproductions.

Product#: B1783

1964 Impala, Bel Air, Biscayne; Front Bumper Bracket Set; 3 Piece Set; RH Passenger Side

Correct reproduction front bumper bracket for 1964 Chevrolet Implala, Bel Air and Biscayne models. Each bracket is manufactured in stamped steel to the same configuration as the factory originals. Used to mount the RH...

Product#: B1785

1964 Impala, Bel Air, Biscayne; Rear Bumper Bracket Set; 2 Piece Set; RH Passenger Side

Restore factory-correct fit and function with this accurate reproduction front bumper bracket, designed specifically for the passenger side (RH) of 1964 Chevrolet Impala, Bel Air, and Biscayne models. Expertly crafted from...

Product#: B1784

1964 Impala, Bel Air, Biscayne; Front Bumper Bracket Set; 3 Piece Set; LH Driver Side

Restore factory-correct fit and function with this accurate reproduction front bumper bracket, designed specifically for the driver side (LH) of 1964 Chevrolet Impala, Bel Air, and Biscayne models. Expertly crafted from...

Product#: A1680

1963-64 Impala, Biscayne, Bel Air; Front Bumper Brace; RH Passenger Side; EDP Coated

Restore the structural integrity and appearance of your classic Chevy's front end with this premium reproduction front bumper bracket, designed specifically for 1963?1964 Chevrolet Impala, Biscayne, and Bel Air models....

Product#: B1710

1963 Impala, Bel Air, Biscayne; Front Bumper Bracket Set; 5 Piece Set

Restore your front end with confidence using this correct reproduction front bumper bracket set, engineered specifically for all 1963 Chevrolet Impala, Bel Air, and Biscayne models. Each bracket in this 5-piece set is...

Product#: B17056

1966 Impala, Bel Air, Biscayne, Caprice; Front Bumper Bracket Set; 4 Piece Set

Restore your classic Chevy's front-end structure with this premium reproduction front bumper bracket set, designed specifically for 1966 Impala, Caprice, Bel Air, and Biscayne models. Each bracket is crafted from high-quality...

Product#: B1786

1964 Impala, Bel Air, Biscayne; Rear Bumper Bracket Set; 2 Piece Set; LH Drivers Side

Restore factory-style strength and appearance with this **correct reproduction rear bumper bracket, designed for use on the driver side (LH) of 1964 Chevrolet Impala, Bel Air, and Biscayne models. Manufactured from...

Product#: A1679

1963-64 Impala, Biscayne, Bel Air; Front Bumper Brace; LH Driver Side; EDP Coated

Restore the structural integrity and appearance of your classic Chevy's front end with this premium reproduction front bumper bracket, designed specifically for 1963?1964 Chevrolet Impala, Biscayne, and Bel Air models....

Product#: B660276

1964 Impala / Full Size Front Bumper Mounting Hardware Set ; 124 Piece Set

Reproduction of the original style hardware required to mount a 3 piece front bumper for 1964 Impala and Full Size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...

Product#: B660272

1962 Impala / Full Size Front Bumper Mounting Hardware Set ; 126 Piece Set

Reproduction of the original style hardware required to mount a 3 piece front bumper for 1962 Impala and Full Size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...

Product#: B660273

1962 Impala / Full Size Rear Bumper Mounting Hardware Set ; 64 Piece Set

Reproduction of the original style hardware required to mount a 3 piece rear bumper for 1962 Impala and Full Size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...

Product#: B660260

1959 Impala, Bel Air, Biscayne, El Camino; Front Bumper Mounting Hardware Set; 136 Piece Set

Reproduction of the original front bumper hardware set for use with 1959 Chevrolet Impala, Biscayne, Bel Air, and El Camino models with 2-piece front bumpers. Each hardware set includes all the necessary nuts, bolts, and...

Product#: B660271

1961 Impala / Full 96 Piece Rear Bumper Mountng Hardware Set

Mounting an original or reproduction bumper is made much easier by having the right mounting hardware. Set includes the necessary nuts, bolts, and washers, to install the bumper.

Product#: B660266

1960 Impala / Full 70 Piece Rear Bumper Mountng Hardware Set

Mounting an original or reproduction bumper is made much easier by having the right mounting hardware. Set includes the necessary nuts, bolts, and washers, to install the bumper.

Product#: B660261

1959 Impala / Full 64 Piece Rear Bumper Mountng Hardware Set

Mounting an original or reproduction bumper is made much easier by having the right mounting hardware. Set includes the necessary nuts, bolts, and washers, to install the bumper.

Product#: A1670

1958 Impala / Full Size Inner Front Bumper Brace; LH

Reproduction of the front inner bumper brace for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit.

Product#: A1671

1958 Impala / Full Size Inner Front Bumper Brace; RH

Reproduction of the front inner bumper brace for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit.

Product#: A1676

1958 Impala / Full Size Rear Bumper End Brace; LH

Reproductions of the rear bumper end brace for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit.

Product#: A1674

1958 Impala / Full Size Rear Bumper Corner Brace; LH

Reproductions of the rear corner brace for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit.

Product#: A1677

1958 Impala / Full Size LH/RH Rear Bumper Outer Bracket

Reproductions of the rear outer bracket for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit. Sold as each. Fit both left or right hand side.

Product#: B660274

1963 Impala / Full Size Front Bumper Mounting Hardware Set ; 120 Piece Set

Reproduction of the original style hardware required to mount a 3 piece front bumper for 1963 Impala and Full Size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...

Product#: B660275

1963 Impala / Full Size Rear Bumper Mounting Hardware Set ; 88 Piece Set

Reproduction of the original style hardware required to mount a 3 piece rear bumper for 1963 Impala and Full Size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...

Product#: B660270

1961 Impala, Bel Air, Biscayne; Front Bumper Mountng Hardware Set; 116 Piece

Mounting an original or reproduction bumper is made much easier by having the right mounting hardware. This bumper bolt ad hardware set includes all the necessary components needed to install the front and rear bumpers on...

Product#: C2278

1964 Impala / Full Size; Front Bumper Brace; Center Section

Correct reproduction front center bumper brace for 1964 Impala, Bel Air and Biscayne models. Replace your original bent bracket with this stamped steel reproduction. Comes finished in black EDP coating for corrosion...

Product#: B660265

1960 Impala / Full 100 Piece Front Bumper Mountng Hardware Set

Mounting an original or reproduction bumper is made much easier by having the right mounting hardware. Set includes the necessary nuts, bolts, and washers, to install the bumper.

Product#: B660250

1958 Impala / Full 60 Piece Front Bumper Mountng Hardware Set

Mounting an original or reproduction bumper is made much easier by having the right mounting hardware. Set includes the necessary nuts, bolts, and washers, to install the bumper.

Product#: L19063P

1962-63 Impala; Bel Air; Biscayne; Bumper Support Bracket Brace; Front Outer; LH or RH

Replacement front bumper outer support brackets for all 1962-63 Chevrolet full size passenger car models. Manufactured from stamped steel to factory specifications. These brackets secure the front bumper outer corner to the...

Product#: A1672

1958 Impala / Full Size Outer Front Bumper Brace; LH

Reproduction of the front outer bumper brace for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit.

Product#: A1673

1958 Impala / Full Size Outer Front Bumper Brace; RH

Reproduction of the front outer bumper brace for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit.

Product#: L19082P

1961 Impala; Bel Air; Biscayne; Bumper Support Bracket; Front Outer; LH or RH

Replacement front bumper outer support bracket for all 1961 Chevrolet full size passenger car models. Manufactured from stamped steel to factory specifications. These brackets secure the front bumper outer corner to the...

Product#: A1675

1958 Impala / Full Size Rear Bumper Corner Brace; RH

Reproductions of the rear corner brace for 1958 full size models. This stamped steel brace is manufactured to factory specifications for a perfect fit.

Product#: G4141

1991-96 Wagon RH Outer Bumper Cover Bracket

When replacing your damaged bumper cover, install it properly with original GM fasteners.

Product#: G4142

1991-96 Wagon LH Outer Bumper Cover Bracket

When replacing your damaged bumper cover, install it properly with original GM fasteners.

Product#: B660277

1964 Impala / Full Size Rear Bumper Mounting Hardware Set ; 104 Piece Set

Reproduction of the original style hardware required to mount a 3 piece rear bumper for 1964 Impala and Full Size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...

Product#: K228

1963-66 Impala, Bel Air, Biscayne, Caprice; Rear Bumper Guard Mounting Bracket Set

OER reproduction of the original rear bumper guard bracket for use on 1963-66 Full Size Chevrolet models including Impala, Bel Air, Biscayne and Caprice. Manufactured in stamped steel replicating the original shape for a...