Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...

Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...

Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...

Product#: CM3005

1963-72; Chevrolet Bow Tie Outer Door Mirror; with Mounting Hardware

Correct reproduction of the original outer door mirror designed for use with various 1967-72 Chevrolet models. Each mirror is manufactured in die-cast zinc to factory specifications. Will fit and install as original. Features...

Product#: CM3004

1968-72 Outer Door Mirror; Chrome: LH; Smooth Style Base; Various GM Models

Reproduction of the original outer door mirror designed for use on various 1968-72 GM models. Each mirror is manufactured in quality die-cast zinc replicating the original mirror in quality and fit. This reproduction mirror...

Product#: 548935

1962-1977 GM; Windshield Washer Jar Bracket; Various Models

OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...

Product#: 9785616

1955-82 Spare Tire Hold Down Nut; 5/16"-18 Thread; 3.88" Wide; Zinc Finish

OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....

Product#: 3764424

1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models

Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...

Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Product#: 3909197

1966-74 GM; Outer Door Mirror; Round; with Ribbed Base; Hardware Included; "Show Quality"

Reproduction of the original outer door mirror designed for use with various 1966-74 GM models. Original style replacement outer door mirror manufactured in high quality zinc die-cast with excellent chrome finish. Each mirror...

Product#: 3910667

1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; LH; Driver Side

Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...

Product#: CD2014114

1959-60 GM B-Body Convertible; Top Only; Canvas Cloth; Black

Reproduction convertible top, manufactured using heavy weight Stayfast Canvas Cloth materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams are highly...

Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...

Product#: CD2025114

1961-64 GM B-Body Convertible; Top Only; Use With Plastic Curtain; Canvas Cloth; Black

Reproduction convertible top, manufactured using heavy weight Stayfast Canvas Cloth materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams are highly...

Product#: CD2018114

1971-75 Impala/GM B-Body Convertible; Top Only; Stayfast Canvas Cloth; Black

Reproduction convertible top, manufactured using heavy weight Stayfast Canvas Cloth materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams are highly...

Product#: BG3099Y

1961-62 Impala / Fullsize 4 Door Hardtop Smoke Back Glass

Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...

Product#: 3907626

1967-81 GM Hood Hinge Spring ; Each

Reproduction of the original hood hinge spring designed for use on various GM vehicles. Each spring is manufactured to replicate the original in quality and design. Will fit and install as original and features OE tension...

Product#: 152622

1963 Impala / Full Size Rear Bumper; Smoothie Bumper; 1 Piece Design

We now offer this beautifully designed rear chrome bumper for 1963 Impala, Bel Air and Biscayne models. Give your Chevy B-Body a custom look with this seamless chrome smoothie rear bumper. Replaces the original bumper and...

Product#: 152619

1963 Impala / Full Size; Front Bumper; Smoothie Bumper; 1 Piece Design

We now offer this beautifully designed front chrome bumper for 1963 Impala, Bel Air and Biscayne models. Give your B-Body a custom look with this seamless chrome smoothie rear bumper. Replaces the original bumper and bolts...