Product#: K115

1964 Impala, Bel Air, Biscayne; Outer Grill Eyebrow Moldings; RH & LH; Pair

Reproduction of the original front fender lower eyebrow (outer grill) moldings designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is a replication of the original GM eyebrow molding found on...

Product#: 3827132

1963 Impala, Bel Air, Biscayne; Upper Eyebrow Molding; RH Passenger Side

Reproduction of the original front upper eyebrow extension molding designed for use on 1963 Impala and Full Size Chevrolet models. Manufactured in quality stamped aluminum replicating the original molding in fit and...

Product#: K331

1962 Impala; Fender Top Chrome Ornaments; with Hardware; RH & LH; Pair

Reproduction of the original front fender ornaments for use with 1962 Impala and Full Size Chevrolet models. Each ornament set is manufactured in zinc die-cast metal and chrome plated replicating the original in appearance...

Product#: CM2080

1960 Chevrolet Impala; Front Fender Louver Set; with Fasteners; 8 Piece Set

Reproduction of the original front fender louver moldings designed for use with 1960 Impala models. Each louver set is manufactured in die-cast zinc featuring a bright chrome plated finish with black accents. Replace the...

Product#: B6705

1967 Impala / Full-Size Upper Eyebrow Moldings

Reproduction of the upper front eyebrow moldings for 1967 models. Each molding is designed and contoured to exact specifications for an authentic appearance. Manufactured in stamped aluminum, molding fits directly above the...

Product#: P1960

1960 Impala, El Camino; Front Fender Moldings; Center Wrap Around; RH and LH; Pair

Reproduction center front fender moldings for 1960 Chevrolet Impala and El Camino models. This molding is manufactured to correct factory specifications that replicate the original in every detail. Replaces the old or missing...

Product#: CM2220

1963 Impala / Full-Size 4 Piece Front Fender Louver Set

Reproduction front fender louvers for use on 1963 full size models. Includes all 4 pieces for complete replacement.

Product#: CX1864

1959 Impala, Bel Air, Biscayne; Front Fender Ornaments; Pair

Each ornament is manufactured in cast steel and chrome plated replicating the original in design, appearance, and fitment. These front fender top ornaments are commonly rusted or ptted and usually need replacing. Includes RH...

Product#: B6700

1967 Chevrolet Impala, Lower Front Fender Eyebrow Moldings; Pair

Reproduction of the original lower front fender eyebrow moldings for use on 1967 Chevrolet Impala models. Each molsing is manufactured in quality stamped aluminum replicating the original molding exactly. Includes the RH and...

Product#: CX1866

1961 Impala / Full-Size Fender Top Ornaments

Reproduction fender top ornaments for 1961 full size Chevrolet models. These top quality, cast steel ornaments are chrome plated and will add that finishing touch to your restoration. Sold only as a pair.

Product#: CX1865

1960 Impala / Full-Size Fender Top Ornaments

Reproduction fender top ornaments for 1960 full size Chevrolet models. These top quality, cast steel ornaments are chrome plated and will add that finishing touch to your restoration. {specs} {fitment} Sold only as a pair.

Product#: C6405

1964 Chevrolet Impala; Lower Front Fender Molding" RH and LH; Pair

Reproduction of the original lower front fender side molding for use with 1964 Chevrolet Impala standard models. Each molding is manufactured in quality stamped aluminum that replicates the original in design, fitment, and...

Product#: A1910

1958 Impala / Bel Air Front 8 Piece Fender Louver Set

Reproduction front fender louvers for 1958 Impala / Bel Air models. These louvers are mounted on each fender just behind the headlamp bezels.

Product#: B9026

1964 Chevrolet Impala; Upper Front Fender Side Molding; 2 Door; RH or LH; Pair

Reproduction of the original exterior upper front fender molding for use with 1964 Chevrolet Impala 2 door models. Each molding is manufactured to correct factory specifications replicating the original in design and...

Product#: CS6374

1963 Impala; Front Fender Molding Attach Brackets; RH and LH; Pair

Reproduction front fender molding attachment brackets for 1963 Impala models. These brackets are manufactured to factory dimensions and replaces the old, corroded, bent, or missing originals. Designed to install the fender...

Product#: CS631

1963 Impala SS; Front Fender Molding Insert Set; Authentic Engine Turned Aluminum; LH and RH

Reproduction of the original Super Sport front fender molding aluminum inserts designed for use with 1963 Impala SS models. Each insert is manufactured from aluminum to factory specifications featuring "engine turned" pattern...

Product#: B6706

1967 Chevrolet Impala; Front Fender Headlamp Corner Molding; RH and LH; Pair

Reproduction of the original front fender to corner headlamp moldings for use with 1967 Chevrolet Impala Super Sport coupe or convertible models. This corner molding is manufactured in bright aluminum with black accents that...

Product#: 14045

1958 Impala / Full Size Fender Top Ornaments

A reproduction of the fender top ornaments for 1958 full size Chevrolet models. These top quality, cast steel ornaments are chrome plated and will add that finishing touch to your restoration. Replace your missing or pitted...

Product#: 14042

1958-60 Impala / Full Size accessory Exhaust ports

This is a top quality reproduction of the optional accessory exhaust ports for all 1958-60 Chevrolet models. These are the aluminum oval ports mounted to the lower rear of the quarter panel to give the appearance of dual...

Product#: B19088

1961 Impala / Full Size Fender Side Molding

Reproductions of the original side front fender side moldings. Sold as each and will fit LH or RH side. Note: Shipped oversize.

Product#: B9018

1963 Impala, Bel Air, Biscayne; Front Fender Molding Strips; Pair

Reproduction of the original front fender molding strips designed for use with 1963 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is manufactured in quality stamped anodized aluminum replicating the original in...

Product#: K103

1963 Impala; Bel Air; Biscayne; Lower Front Eyebrow Moldings; RH & LH; Pair

Reproduction front fender lower eyebrow moldings for 1963 Chevrolet Impala, Bel Air and Biscayne models. These moldings are manufactured to factory specifications from high quality bright finished aluminum for an original fit...

Product#: 3827131

1963 Impala, Bel Air, Biscayne; Upper Front Eyebrow Molding ; LH Driver Side

Reproduction of the original front upper eyebrow extension molding designed for use on 1963 Impala and Full Size Chevrolet models. Manufactured in quality stamped aluminum replicating the original molding in fit and...

Product#: C2394

1977-79 Impala, Caprice; Front Wheel Opening Molding; RH Passenger Side

Reproduction of the original front fender wheel opening molding designed for use on 1977-79 Impala and Caprice models. Each molding is manufactured to replicate the original in contour and fitment. Quality aluminum material...

Product#: C2395

1977-79 Impala, Caprice; Front Wheel Opening Molding; LH Driver Side

Reproduction of the original front fender wheel opening molding designed for use on 1977-79 Impala and Full Size Chevrolet models. Each molding is manufactured to replicate the original in contour and fitment. Quality...

Product#: G1619

Plastic GM Fastener

Correct GM fastener used to install many items including door seals, roofrail seal, seat adjuster cover, air duct, wheel house cover and more on various GM models. Use as needed. Measures: Overall Length: 15/32:" Stem Length:...

Product#: 3865253

1965 Impala, Bel Air, Biscayne; Headlight Eyebrow Molding; LH Driver Side; GM Licensed

Correct reproduction headlamp eyebrow molding for 1965 Impala and Full Size Chevrolet models. Each molding is manufactured in aluminum material and stamped to exact factory dimensions making installation easy. For LH driver...

Product#: B1399

1968 Impala, Bel Air, Caprice; Wheel Opening Molding Kit; Front & Rear; with Hardware; Set of 4

Reproduction wheel opening moldings for 1968 Impala and Full Size Chevrolet models. Each molding is stamped to original factory specifications with correct contours and finish for an original appearance and fit. Each set...

Product#: B1399A

1969 Impala, Bel Air, Caprice; Wheel Opening Molding Kit; Front & Rear; with Hardware; Set of 4

Reproduction of the original wheel opening moldings designed for use on 1969 Impala and Full Size Chevrolet models. Each molding is stamped to original factory specifications with correct contours and finish for an original...

Product#: 3865254

1965 Impala, Bel Air, Biscayne; Headlight Eyebrow Molding; RH Passenger Side; GM Licensed

Correct reproduction headlamp eyebrow molding for 1965 Impala and Full Size Chevrolet models. Each molding is manufactured in aluminum material and stamped to exact factory dimensions making installation easy. For RH...

Product#: B1398

1967 Impala, Bel Air, Caprice; Wheel Opening Molding Kit; Front & Rear; with Hardware; Set of 4

Reproduction of the original wheel opening moldings designed for use on 1967 Impala and Full Size Chevrolet models. Each molding is stamped to original factory specifications with correct contours and finish for an original...

Product#: BC1028

1955-76 Chevrolet Bel Air, 150, 210, Impala, Caprice; Fender Skirt Rubber Seal ; 120" Long; OER

Reproduction fender or quarter panel skirt rubber seal for various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment and appearance. Measures 120"...

Product#: B6601

1966 Impala, Bel Air, Biscayne, Caprice; Front Headlight Eyebrow Moldings; RH & LH; Pair

Reproduction headlamp opening eyebrow moldings for 1966 Impala, Bel Air, Biscayne, and Caprice models. These quality reproduction moldings are manufactured to exact factory specifications using quality aluminum material to...

Product#: C2512

Vintage Style Curb Feelers

Install these universal curb feelers to prevent damaging the wheels or fenders of your classic. For an extra custom touch, add the valve stem adapter set (Part # CP500175) and pick up a set of custom valve caps of your...