Product#: B1773

1965 Impala 2-Door Hardtop; Trunk Lid

Reproduction trunk lid for 1965 Chevrolet Impala 2-door hardtop models. Each trunk lid is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....

Product#: 153831

1962 Chevrolet Impala; Full Quarter Panel; 2 Door Hardtop; LH

Reproduction full style quarter panel for 1962 Chevrolet Impala 2-door hardtop models. Each quarter panel is manufactured in stamped steel to factory specifications featuring correct contours for an authentic appearance and...

Product#: 153832

1962 Chevrolet Impala; Full Quarter Panel; 2 Door Hardtop; RH

Reproduction full style quarter panel for 1962 Chevrolet Impala 2-door hardtop models. Each quarter panel is manufactured in stamped steel to factory specifications featuring correct contours for an authentic appearance and...

Product#: BK3005

1958-64 Impala, Bel Air, Biscayne; 2" Drop Front Disc Brake Conversion Kit; With 11" Standard Rotors

These 1958-64 Chevy Impala, Bel Air, Biscayne, Drop Spindle Disc Brake Conversion kits are one of the hottest sellers on the market. These systems not only upgrade your 1958-64 Chevy to disc brakes, they also lower the...

Product#: 8270014A

1958-64 Chevy Impala, Bel Air, Biscayne; Steering Gear Box; Manual or Power Assist; 16:1 Ratio; 4 Turns Lock-To-Lock

This is an all new steering gear box manufactured to correct factory specifications utilizing brand new tooling for an authentic replacement. Replaces gear box used in 1958-64 Chevrolet Impala and full size models with manual...

Product#: A65750150

1958-82 GM; Power Steering Control Valve; "Brand New", Not Rebuilt!

Reproduction power steering control valve for 1958-64 Chevrolet Impala, Bel Air, Biscayne, 1960-68 Chevrolet, GMC truck, 1963-82 Corvette and 1962-67 Chevy II, Nova models equipped with original power assist power steering....

Product#: 8270032B

1970-79 AMC, Chevrolet, Buick, Oldsmobile, Pontiac; 525 Steering Gear Box; Manual; 16:1 Ratio; 4 Turns Lock-To-Lock

This Saginaw 525 style manual steering gear box utilize the latest in steering technology, featuring a highly efficient ball bearing screw that greatly reduces steering effort. This gear is made with new tooling for the...

Product#: AK50105

Upholstery Installation and Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4

Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad the seat frame before installing new upholstery. NOTE: Hog rings are required when installing new upholstery. Available separately. Refer...

Product#: B255215

1961-62 Chevrolet Impala, Bel Air, Biscayne; Rear Dummy Antenna Assembly; LH Drivers Side

Reproduction antenna assembly designed for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to angle the...

Product#: T8974

Universal 9" Windshield Mount Rear View Mirror; Polished Ball Milled Billet Aluminum

Add a custom look to the interior with this fully polished and machined billet aluminum inner mirror. Since you spend most of your time inside your vehicle, why not get rid of your cheap looking original mirror and replace it...

Product#: WT5655C

1967-81 Chevrolet; Rally Wheel; Silver Powder Coated; 15" x 7"; 4-1/4" Back Space; 5 on 4-3/4" Bolt Pattern

Reproduction 15" x 7" Rally Wheel for various Chevrolet models with 5 x 4-3/4" lug pattern. This wheel is manufactured in steel replicating the original in design and appearance. Replace a rusty, pitted or missing Rally wheel...

Product#: T70781

Delco Energizer R59 Battery Topper Top Post

Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring the correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat...

Product#: 14039016

1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models

Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...

Product#: PB1083B

Universal 8" Dual Diaphragm Power Brake Booster - Black

Universal 8" dual diaphragm brake booster. Booster will work on a variety of GM, Ford, trucks, and passenger vehicles. Perfect choice when space is at a premium. Will require adjustable pedal rod, correct clevis for your...

Product#: 154731P

Police Style Steel Wheel; 15" x 7"; Dual Lug Pattern; Argent Silver; Includes Center Cap

Provide a classic look to your vehicle with this Police Style steel wheel. Each wheel comes beautifully powder coated in argent silver color. Wheel features a dual bolt pattern to fit a multitude of vehicles with 5 x 4-3/4"...

Product#: 9746195

1967-68 Chevrolet, Buick; Walnut Woodgrain Steering Wheel ; 16" Diameter 4-1/4" Deep; N34 Option

Reproduction Walnut woodgrain steering wheel originally offered with the optional N34 package on select 1967-68 GM models. Known by the factory as the Woodgrain Plastic Rim Sport Style Steering Wheel, this reproduction...

Product#: 3960722

1969-70 Camaro, Impala, Nova, Chevelle; Rosewood Steering Wheel; 16" Diameter; N34 Option

Reproduction of the original Rosewood steering wheel which was available as part of the optional N34 package on 1969 Chevrolet models.This steering wheel was originally referred to by the factory as Woodgrain Plastic Rim...

Product#: VP28146

Electric Vacuum Pump Set For Power Brakes - Universal Fit

It takes 16" of Hg vacuum to properly activate your vehicle's power brake booster. Sometimes, big-cammed or supercharged engines don't create enough vacuum to operate the booster, making it more difficult to stop. This vacuum...

Product#: B99162

1961-64 Buick, Chevrolet, Oldsmobile; 3-Piece Bucket Seat Trim; Right Side

Reproduction of the original passenger side chrome seat trim for 1962-64 Impala and various other 1961-64 Buick and Oldsmobile models with bucket seats. Each molding is stamped from heavy-gauge steel and chrome plated to...

Product#: AC9560N

Sanden 508 Style A/C Compressor w/ 6-Rib Serpentine Clutch Pulley; Natural Finish; SD508/SD5H14

New, not rebuilt, Sanden SD508 / SD5H14 style air conditioning compressor. The Sanden/Sankyo 508 is the one of the most popular aftermarket compressors on the market. SD508s rob less horsepower resulting in improved fuel...

Product#: B255210

1961-62 Chevrolet Impala, Bel Air, Biscayne; Rear Antenna Assembly; RH Passenger Side

Reproduction of the original rear antenna assembly for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to...

Product#: K86130

OER® Black and Aqua Trunk Spatter Paint Quart

OER® Black and Aqua trunk spatter paint for the descriminating restorer who wants to get an exact color match or to completely restore your trunk to its former glory. This item is produced by the original manufacturer....

Product#: WT5656C

1967-81 Chevrolet; Rally Wheel; Silver Powder Coated; 15" x 8"; 4-1/2" Back Space; 5 on 4-3/4" Bolt Pattern

Replace a rusty, pitted or missing Rally wheel with this outstanding new reproduction. Each wheel comes beautifully powder coated in correct original silver color. Center caps, trim rings and lug nuts are not included and...

Product#: 14039015

1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models

Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...

Product#: 154732P

Police Style Steel Wheel 15" x 8"; Dual Lug Pattern; Argent Silver; Includes Center Cap

Provide a classic look to your vehicle with this Police Style steel wheel. Each wheel comes beautifully painted argent silver. Wheel features a dual bolt pattern to fit a multitude of vehicles with 5 x 4-3/4" or 5 x 4-1/2"...

Product#: MG019219

1967-89 GM; Universal Tachometer Filter

Eliminate tach signal noise and surges caused by your ignition system with this compact and easy-to-install tachometer filter. This filter installs between the tachometer and the signal source and modifies the signal for...

Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: 8545

Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: A11774

1965-86 GM; Interior Door Panel Clip; White Nylon; Each

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...

Product#: 10243

1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Product#: 10630

1970-75 GM; Windshield Molding Clip; Each

Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...

Product#: J222

OER Logo With Tag Decal

Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...

Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: K624

1960-73 GM; Sun Visor Tip and Bushing Set; 4 Piece Set; Various Models

Tired of sunvisors that won't stay put because the nylon tip is gone? Reproduction of the sunvisor tips and bushings designed for use on various GM models. The sunvisor bushings are manufactured to correct OE specifications...

Product#: K348200

1968-77 GM; Window Crank Handle; Riveted Design; with Black Knob; Various Car & Truck Models

OER® reproduction window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile car and truck models. Manufactured in die-cast zinc featuring a chrome finish and a black knob that replicates the...

Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...

Product#: 3762180

1947-91 GM; License, Headlight, Fan Guard, Door Stop, Door Glass; Rubber Bumper; Each; Various Models

OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...

Product#: K1101

1947-1982 Ford, GM, Chrysler; Glove Box Insert Clip; Each

OER® reproduction of the original style stamped metal clip that attaches to the glove box liner in various classic GM passenger cars and trucks. These clips allow the liner to be aligned and attached in place with mounting...

Product#: K72

1968-69 Impala. Bel Air, Chevelle, Biscayne, Station Wagons; Side Marker Bezel; Chrome; Front or Rear; Each

Reproduction of the original chrome side marker lamp bezel designed for use with various 1968-69 Chevrolet models as listed below. Manufactured in die-cast zinc and chrome plated to match the original in quality and design....

Product#: J250

OER Tri-Stic Retractable Pen with Black Ink

Ever wonder where all your pens go? Why not stock up on this eye catching inexpensive OER® black and yellow retractable pen.

Product#: OER15

OER Trade Show Lanyard

Highly visible, quality lanyards are just what you need for any trade show event or car show. Features the bright OER® logo printed on both sides of 3/4" wide sublimation polyester. Includes an attached O-ring that will...

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: K037597

1968-77; GM Cars and Trucks; Window Crank Handle With Clear Knob; Riveted Design

OER® reproduction of the original window crank handle for various 1968-77 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. Manufactured in die-cast zinc featuring a chrome finish and a clear knob that replicates the...

Product#: CM3005

1963-72; Chevrolet Bow Tie Outer Door Mirror; with Mounting Hardware

Reproduction outer door mirror for various 1967-72 Chevrolet models. Each mirror is manufactured in die-cast zinc to factory specifications. Will fit and install as original. Features the Bow Tie emblem engraved on the rear...

Product#: J257

OER Soft Key Tag

This soft key tag is made of a sturdy material that is thick yet pliable, and comes with a spiral key ring.

Product#: 20030351

1977-91 Buck, Chevy, Pontiac, Olds; Dome Lamp Base Reflector; Round; Various Models

OER® reproduction of the original round dome light base reflector for various 1977-1987 GM models. Each dome reflector is manufactured in injection molded ABS, with bright chrome trim, replicating the original reflector...

Product#: X600750

1955-80 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; Each

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Product#: CM3004

1968-72 Outer Door Mirror; Chrome: LH; Smooth Style Base; Various GM Models

Reproduction of the original outer door mirror designed for use on various 1968-72 GM models. Each mirror is manufactured in quality die-cast zinc replicating the original mirror in quality and fit. This reproduction mirror...

Product#: 14746W

1965-70 Impala, Bel Air, Caprice; Full Floor Pan Assembly; with Bracing; Silver Weld Thru Coating; One-Piece

Reproduction floor pan assembly for 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. This complete floor pan is manufactured in quality stamped steel to factory dimensions and replicates the original floor pan...

Product#: 7790753

1964-73 GM; Sun Visor Support Bracket; Coupe; with Hardware; Die-Cast; Each

High quality reproduction of the original interior sun visor support bracket designed for use with various 1964-73 Buick, Chevrolet, GMC, Pontiac and Oldsmobile models. Each sun visor bracket is manufactured in quaility...

Product#: 916177

1966-73 GM; Inner Rear View Mirror ; 8" ; Polished Stainless ; Various GM Models

OER® reproduction of the original inner rear view mirror designed for use on various GM models. This reproduction mirror is manufactured to factory specifications and replicates the original in fit and appearance. This 8"...

Product#: K695101

1968-72 Buick, Chevrolet, Oldsmobile, Pontiac; Front Arm Rest Pad; Urethane Reproduction; 12" Length; RH; Black

OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...

Product#: 548935

1962-1977 GM; Windshield Washer Jar Bracket; Various Models

OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...

Product#: 9785616

1955-82 Spare Tire Hold Down Nut; 5/16"-18 Thread; 3.88" Wide; Zinc Finish

OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....

Product#: 3945461

1967-70 Chevrolet Car, 1967-91 Chevrolet, GMC Truck; Bow Tie Horn Cap; for Wood Wheel & Comfort Grip Steering Wheel; GM Licensed

This is an excellent reproduction of the original horn button cap originally installed on various 1967-70 Chevrolet car models equipped with the optional woodgrain, or Comfort Grip steering wheel. Each cap is manufactured in...

Product#: K630

1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long

Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...

Product#: 14746A

1965-70 Impala, Bel Air, Biscayne, Caprice; Full Floor Pan Assembly; with Bracing; EDP Coating

Reproduction complete floor pan for 1965-1970 Chevrolet Impala, Bel Air, Biscayne and Caprice models. This complete floor pan is manufactured in stamped steel to OE factory specifications replicating the design and fitment...

Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: 14774A

1965 Impala, Bel Air, Biscayne; Complete Trunk Floor Pan; EDP Coated

Reproduction of the original trunk floor panel designed for use with 1965 Chevrolet Impala, Bel Air, and Biscayne 2-door, 4-door, hardtop, convertible and sedan models. Each trunk floor pan is manufactured in stamped steel to...