Product#: RL7

3-1/4" Wide X 6-3/4" Long Leaf Spring U-Bolts

Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavey duty washers. {specs} Applications: 1973-74...

Product#: 499473

1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body

Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...

Product#: *RL11

1967-69 Camaro, Firebird; Mono Rear Leaf Springs; Convertible; Pair; Made in the USA!

Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models models. Each leaf spring is manufactured to factory specifications and replicates the original in quality, design, and...

Product#: *RL10

1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!

Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...

Product#: *RL5

5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style

Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...

Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...

Product#: K550

1970-81 Camaro, Firebird, 1962-79 Chevy II, Nova and X-Body; Rear Spring Shackle Bushing Set

Reproduction rear leaf spring shackle for 1962-79 Chevy II/Nova, GM X-Body, and 1970-81 Camaro, Firebird models. Each shackle eplaces the old or worn out original hardware and bushings with a quality reproduction. Includes...

Product#: *R326

1968-69 Camaro / Firebird Mono To Multi Leaf Conversion Hardware Kit with 3-1/2"" U Bolts

Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...

Product#: *R325

1968-69 Camaro / Firebird Mono To Multi Leaf Conversion Hardware Kit with 3" U Bolts & T Bolts

Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...

Product#: *R654

1970-81 Camaro / Firebird Rear Leaf Spring Pad Set

Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs.

Product#: *R653

1968-69 Camaro / Firebird, 1968-79 Nova Multi Leaf Spring Pad Set

Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs. {fitment} Note: When converting 1967-69 single to multi leaf a...

Product#: SU2461Z

1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"

We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...

Product#: *K3614

1967-81 Rear Spring Eye Bracket Bolt Set (6 piece)

Quality reproduction of the original rear spring eye bracket bolt designed to mount the leaf spring front eye bracket. Each bolt is case hardened for durability and long lasting performance. 6 bolts included in each set....

Product#: K544

1967-69 Camaro, Firebird; Rear Leaf Spring Shackle; LH or RH Side; Each

Reproduction rear spring shackle for 1967-69 Camaro and Firebird models. Shackle is manufactured to OE specifications to replicate the original in appearance, quality, fit and design. Each shackle includes all the necessary...

Product#: W1006

1964-2000 GM; Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH; Various Models; Each

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...

Product#: *RL12

1967-69 Camaro Z/28, Firebird 400, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair

Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-69 Camaro Z28 (302), 1968-81 Firebird 400 and performance models, Chevy II Nova and GM X-body models with 4 leaf rear springs. Each leaf spring...

Product#: RL7A

3-1/2" Wide X 7-1/4" Long Rear Leaf Spring U-Bolts

Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavey duty washers. Applications: 1973-74 Buick...

Product#: E956

1970-81 Camaro, Firebird, Leaf Spring Eye Mounting Bracket; Passenger Side

Reproduction of the original leaf spring eye mounting bracket for use with 1970-81 Camaro and Firebird models. Each bracket is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: *R396

1967-69 Camaro / Firebird, 1962-69 Chevy II / Nova Leaf Spring Shackle Bushing Set

Replace your cracked, shrunken or worn out shackle bushings and bring your rear suspension back to original factory ride specifications. Set includes 8 bushings. Note: No further discounts apply.

Product#: C671003

1967-69 Camaro. Firebird; Coil Spring Front Upper Mounts; Pair

Reproduction front coil spring upper mounts for 1967-69 Camaro, Firebird, and Trans Am models. Manufactured in stamped steel to original factory specifications. Why rely on tired coil spring mounts when you can weld in fresh...