Product#: 3923564

1967-69 Chevrolet, Pontiac; Rear Axle Pinion Rubber Bumper, Each

OER reproduction of the rear axle pinion bumper for 1967 Camaro/Firebird (2nd design), 1968-69 Camaro, Firebird models, and 1968-69 Chevy II / Nova models. Manufactured from quality molded rubber offering an original...

Product#: HC439

1967 Camaro; Rear End Square Traction Bar Bracket

Reproduction of the original traction bar to rear axle tube traction bar mounting bracket for the RH passenger side on 1967 Camaros with 350, 396, and Z28 302 models. The traction bar supports and attaches the rear traction...

Product#: 154982

1967 Camaro; Traction Bar Installation Hardware Kit; Radius Rod, Rear Axle Housing; to Floor; 12-Piece Set

Reproduction of the 350, L-48 Camaro traction bar installation hardware for 1967 Camaro models. This reproduction 12-piece hardware set mounts the radius rod to the rear axle housing and floor. The original style hardware...

Product#: 154981

1967 Camaro; OE Style Traction Bar Installation Hardware Kit; 6-Piece Kit

Reproduction Camaro traction bar installation hardware for 1967 Camaro models. This reproduction 6-piece hardware set mounts the Traction bar/Radius rod to the rear axle housing bracket and to the front anchor plate. The...

Product#: 525419

1967-81 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Pinion Bumper; Each; Various Models

Reproduction of the rear axle pinion bumper for various GM models. Manufactured from quality molded rubber, with an integrated steel bracket in the correct OE configuration, offering an original appearance and fit. This...

Product#: 154980

1967 Camaro; Traction Bar Lower Stop Bracket Hardware Kit; 5-Piece Kit

Reproduction Z/28 and L78 Camaro square traction bar installation hardware for 1967 Camaro models. This reproduction 5-piece hardware set mounts the traction bar stop bracket to the rear axle housing bracket and mounts the...

Product#: LW20475

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...

Product#: *H310404

Heidts 4 Link w/Ford 9" Housing/31 Spline Axles-Polished 4-Link Bars/Panhard-w/Billet Adj Shocks

If you're seeking better handling and more power-handling capabilities from your classic, then check out the 4-link coil-over rear suspension from Heidt's. This high-performance suspension is designed to bolt directly in...

Product#: 5295105

1967-69 Camaro/Firebird Torque Arm Rear Suspension

TCI Engineering's 1967-1969 Chevy Camaro Torque Arm assembly is engineered for Street, Autocross and Road Course Applications. The Torque Arm rear suspension was designed to eliminate the suspension bind that occurs when...

Product#: BX20051A

1967-69 F-Body BMR Torque Arm For GM 12-Bolt (Red)

BMR's torque arm is a great alternative to traction bars. Working independent of the leaf springs, the torque arm aids traction while allowing the spring to support the vehicle, something not possible with traction bars. With...

Product#: GF42304

2010-15 Camaro; Detroit Speed; Adjustable Lower Control Arms; Pair

Adjustable Lower Control Arms are boxed and constructed from HSLA steel making them significantly stronger than the stock stamped steel arms. They are equipped with high durometer polyurethane bushings instead of the stock,...

Product#: BX20058B

1985-02 F-Body BMR Chrome Moly Adjustable Torque Arm - Black Hammertone

Factory torque arms do a great job of dissolving horsepower and torque into the chassis. Replace your weak, flexible stamped metal torque arm with a rigid BMR tubular version and put that power where it is supposed to be -...

Product#: BX20058A

1985-02 F-Body BMR Chrome Moly Adjustable Torque Arm - Red

Factory torque arms do a great job of dissolving horsepower and torque into the chassis. Replace your weak, flexible stamped metal torque arm with a rigid BMR tubular version and put that power where it is supposed to be -...

Product#: UM2201A

1993-2002 GM F-Body W/ Stock Kooks LH - Tunnel Mounted Short Torque Arm (W/ Driveshaft Loop) - Red

Tunnel mounted torque arm is designed to work with factory manual and automatic transmissions. It is designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage....

Product#: UM2217A

1982-92 GM F-Body W/ 700R4 & T5 Trans - Tunnel Mounted Torque Arm (W/ Driveshaft Loop) - Red

Tunnel mounted torque arm is designed to work with factory manual and automatic transmissions. It is designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage....

Product#: UM2215B

1982-92 GM F-Body W/ TH350 & T5 Trans - Tunnel Mounted Torque Arm (W/ Driveshaft Loop) - Black

Tunnel mounted torque arm is designed to work with factory manual and automatic transmissions. It is designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage....

Product#: UM2219A

1982-92 GM F-Body W/ TH400 Trans - Tunnel Mounted Torque Arm (W/ Driveshaft Loop) - Red

Tunnel mounted torque arm is designed to work with factory manual and automatic transmissions. It is designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage....

Product#: GF149360B

2010-12 Camaro Pro-Drag Lower Control Arms With Delrin Bushings - Black

Our Pro-Drag low profile fabricated rear lower control arms will lock in your IRS, minimize wheel hop and increase traction and handling. Our rear lower control arms are much stronger than the factory's stamped steel arms,...

Product#: UM2200A

1993-2002 GM F-Body W/ Stock Kooks LH - Tunnel Mounted Short Torque Arm (W/O Driveshaft Loop) - Red

Tunnel mounted torque arm is designed to work with factory manual and automatic transmissions. It is designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage....

Product#: UM2200B

1993-200 GM F-Body W/ Stock Kooks LH - Tunnel Mounted Short Torque Arm (W/O Driveshaft Loop) - Black

Tunnel mounted torque arm is designed to work with factory manual and automatic transmissions. It is designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage....