Product#: 3892756

1967 Camaro / Firebird Rear Axle Bumper

Reproduction rear axle bumper mounts on inner wheelhouse on all 1967 Camaro and Firebird models. Attaches to the body to prevent the rear axle from bottoming out. Sold individually. 2 required per vehicle. {fitment}

Product#: A9591311

1967-69 Camaro & Firebird with Mono-leaf Springs - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: M12140

1993-02 Camaro / Firebird with 4-Channel ABS Moser C-Clip Axles, 10 Bolt, 32" Long, 28 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12133

1967-76 Moser C-Clip Axles 12 Bolt 29-1/2" Long 30 Spline

Moser offers forged steel street axles for 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12134

1970-81 Camaro / Firebird Moser C-Clip Axles 10 Bolt 30-1/16" Long 28 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12135

1970-81 Camaro / Firebird Moser C-Clip Axles 10 Bolt 30-1/16" Long 30 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12138

1982-92 Camaro / Firebird Moser C-Clip Axles 10 Bolt 30-5/16" Long 28 Spline

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No further...

Product#: M12141

Moser Factory Axle C-Clip Eliminator with Factory Axles and 1.400" Bearing Seat

Our improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...

Product#: M12142

Moser Axle C-Clip Eliminator with Moser Axles and 1.533" Bearing Seat

Our improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...

Product#: G6045

1965-81 Axle Shaft Lock/C-Clip (.150)

Original replacement locks for applications below. Fits 1967-81 with.150 horseshoe.

Product#: GF521011

2010-15 Camaro w/Aftermarket Driveshaft - Driveshaft Extension Bracket - For Use With GF521010 Only

If you have installed an aftermarket driveshaft in your 2010-2015 Camaro SS, the front universal joint is moved rearward, away from the transmission tailshaft. The Metco Motorsports driveshaft safety loop kit (part number...

Product#: W507

1965-89 GM Rear Axle Bearing

Prevent costly damage by replacing rear axle bearings before they seize with this premium replacement rear axle bearing. Always check the bearings and seals whenever removing the rear drums/axle for signs of wear. Sold...

Product#: W1563

1965-02 Rear Axle Repair Bearing

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...

Product#: M28259

Moser 7/16" - 20 X 1-3/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with disc brakes. These are a great addition when installing Moser axles on your vehicle or just replacing your old wheel studs. Sold as a set of 10. One...

Product#: M28060

Moser 7/16" - 20 X 1-1/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. Note:...

Product#: G5007K

1967-81 Camaro; Rear Axle Retainer Plate Hardware Set; Black Phosphate; 24 Pieces

Reproduction rear axle retainer plate mounting hardware set for 1967-81 Camaro models. This high quality hardware set features the correct size original style fasteners with the correct finish and headmarks. Rest assured you...

Product#: A9593312

1982-92 Camaro & Firebird - Currie 9" Housing and Axle Kit with Torque Arm

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: A9592312

1970-81 Camaro & Firebird - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: A9591312

1967-69 Camaro & Firebird with Multi-leaf Springs - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Product#: G4657

1998-02 Camaro / Firebird Rear Axle Shaft

Replace your bent or broken axle shafts with high quality original GM axles. This axle is 30-5/32" overall length with 28 splines for an 8.5", 10-bolt axle housings. Will replace the RH or LH axle. Wheel studs or bearing not...