Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...

Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: 368077

1967-2002 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Tension Spring; Various Car and Truck Models

This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: K1520

1967-69 Camaro; Accelerator Pedal Assembly; with 6 Cyl. or Cross Ram Dual Carburators with 8 Cyl

Reproduction of the original accelerator assembly designed for use with 6 cylinder or 8 cylinder dual carburetor Cross Ram models. Extends from the firewall and comes with the accelerator pedal, pedal mount pin and spring,...

Product#: K517

1967 Camaro; Accelerator Pedal Assembly; V8; 327ci, 350ci, 396ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Camaro models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: K520

1969 Camaro; Accelerator Pedal Pad Assembly; V8; with Cowl Induction

This is the complete accelerator pedal assembly which extends from the firewall on all V8-equipped vehicles with cowl induction. This assembly comes complete with the accelerator pedal, pedal mount pin and spring, accelerator...

Product#: 3923551

1968-69 Camaro Z28 Carb to Accelerator Lever Rod; 302 4 bbl

Reproduction accelerator pedal rod for 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...

Product#: 3959113

1969 Chevrolet Camaro; Accelerator Throttle Arm; V8; with Cowl Induction Hood

Reproduction of the original accelerator throttle arm designed for use with 1969 Chevrolet Camaro models that included a cowl induction hood. This is a correct reproduction of the original GM throttle lever arm. Manufactured...

Product#: 3923503

1968-69 Camaro, Nova; Accelerator Throttle Arm V8; 307ci, 350ci, 396ci; w/o Cowl Induction

Reproduction of the original throttle arm designed for use on 1968-69 Camaro and Nova models. Each throttle arm is produced to replicate the original in quality and fit. Replace your worn out or damaged original throttle arm...

Product#: 340637

1974-81 Outer Accelerator Pull Spring

Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...

Product#: K912

1967-2004 Buick, Chevy, Pontiac, Olds; Accelerator Pedal Pad Trim Plate; Stainless Steel; Various Models

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....

Product#: K519

1968-69 Camaro, 1968-74 Nova, Omega, Ventura; Accelerator Pedal Assembly; V8; 307ci, 327ci, 350ci, 396ci, 402ci

Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...

Product#: 3923539

1968-69 327, 350 Carb to Accelerator Lever Rod; Small Block with 4 bbl Carb

Reproduction 1968-69 accelerator pedal rod for 327 or 350 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...

Product#: 3909978

1967 Chevy, Pontiac; Accelerator Pad; with Steel Backing Plate; OE Style; Various Models

Reproduction of the original accelerator pedal pad designed for use on various 1967 GM models. This accelerator pedal pad is manufactured in the correct design based on a steel backing unlike the GM plastic replacements. The...

Product#: 14318

1968-69 Camaro; Crossram Throttle Rod; Accelerator Pedal Rod

Reproduction crossram throttle rod or accelerator pedal rod for 1968-69 Camaro models equipped with the optional Crossram induction system. This unique linkage rod mounts to the accelerator pedal at the firewall and attaches...

Product#: 3909980

1967-69 Camaro, 1970 Nova; Accelerator Pedal Rod; V8

Reproduction of the original accelerator pedal pad rod designed for use on 1967 Camaro (6 & 8 cylinder), 1968-69 Camaro (8 cylinder), and 1970 Chevy II Nova models. This rod connects between the throttle arm and the...

Product#: 14876

1970-72 Camaro, Firebird; Accelerator Cable Bracket; with Holley Carburetor

Reproduction accelerator throttle cable bracket for 1970-72 Camaro and Firebird models with Holley Carburetor. This quality bracket is manufactured in stamped steel to the original factory configuration. Will fit and install...

Product#: P145

1967-69 F-Body; 68-74 Nova - Billet Throttle Assembly with Black Anodized Finish

Manufactured from solid aluminum, each billet throttle assembly is fully adjustable featuring a uniquely designed molded rubber insert, and spring loaded pedal. Made in USA Each assembly is anodized with machined highlights.

Product#: FM6098

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: FM6097

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Ball Milled Finish

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: BAG6096

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Assembly - Brushed w/Rubber Inserts

Lokar 1967-69 Camaro & Firebird billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The...

Product#: B199165

1967-69 Camaro/Firebird Billet Specialties Billet Aluminum Cable Style Gas Pedal Assembly - Black

Add a touch of class to the interior of your 1967-69 Camaro or Firebird with one of these CNC machined cable style gas pedal assemblies from Billet Specialties. These pedals convert your old linkage to a more modern cable...

Product#: B199160

1967-69 Camaro/Firebird Billet Specialties Billet Aluminum Cable Style Gas Pedal Assembly - Polished

Add a touch of class to the interior of your 1967-69 Camaro or Firebird with one of these CNC machined cable style gas pedal assemblies from Billet Specialties. These pedals convert your old linkage to a more modern cable...

Product#: BG6004

Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: BG6096

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Assembly - Black with Rubber Inserts

Lokar 1967-69 Camaro billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle cable set up. The traditional...

Product#: GF121001

2010-13 Camaro Dark Series Pedal Covers - Manual Transmission

Give your cockpit a serious, hardcore look with these Dark Series billet pedal covers for the Generation 5 Camaro. Machined from 6061-T6 billet aluminum, these pedals are then finished in flat black anodized hard coat and...

Product#: GF121000

2010-13 Camaro Dark Series Pedal Covers - Automatic Transmission

Give your cockpit a serious, hardcore look with these Dark Series billet pedal covers for the Generation 5 Camaro. Machined from 6061-T6 billet aluminum, these pedals are then finished in flat black anodized hard coat and...

Product#: D1950

Street Demon; Throttle Solenoid Set

Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel Systems includes the solenoid, bracket, and mounting nut....

Product#: G13212

2010-15 Camaro Accelerator Pedal Assembly - Original GM

Original GM accelerator pedal assembly for 2010-15 Camaro models. Includes position sensor for an exact replacement. This pedal installs with three bolts and remedies a common problem with the original throttle assembly. Fits...

Product#: TF801171

1994 & Later LT1/LT4 - Black Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: SR4015

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: TF801170

1992-93 LT1 - Black Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: SR4014

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: TF801167

1992-93 LT1 Lokar Stainless Steel Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: BG6092

1967-69 Camaro / Firebird Lokar Billet Accelerator Pedal Pad - Flat Style - Black w/Rubber Inserts

Lokars traditional flat style billet aluminum throttle pedal pad lets you retain the factory throttle linkage, with a updated look inside the car. The direct fit throttle pad replaces the factory pad, measures 2" x 5" and...

Product#: E8030

Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Chrome Plated

Edelbrock throttle, cruise control, and transmission kick down set for pre-1978 small block Chevy cars with a TH350, 200R4, or 700R4 transmission. Manufactured in stamped steel and either chrome or gold cadmium plated....

Product#: SR4012

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: TF801166

Lokar Throttle Cable Bracket - 1985-91 TPI Engines - Triple Hole - Black Finish

This billet aluminum cable bracket from Lokar mounts to the side of your TPI intake plenum and allow you to install your throttle cable. Made in USA Black billet aluminum. Triple hole stud for throttle, kickdown, and cruise...

Product#: SR4008

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Single Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: SR4018

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Brushed

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: SR4007

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Dual Hole - Brushed

Brushed Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: E284

1968-69 Camaro; Gas Pedal Throttle Set; 5 Piece Set

Reproduction of the original gas pedal throttles and hardware designed for use with 1968-69 Camaro models. Each set includes the gas pedal arm, bushing, throttle arm, and grommet for a complete replacement of the throttle. 5...

Product#: DC2083

2 and 4 Bbl Holley Throttle Return Spring Set

Fits Holley 2300 and 2305 2 bbl. or Holley 4150 and 4160 4 bbl. carburetors mounted on any manifold. {fitment}

Product#: D1953

Street Demon; Throttle/Transmission Kickdown Cable Bracket Set

This throttle and transmission kickdown cable bracket set removes the guesswork when installing a Street Demon carburetor in almost any carbureted GM application. All brackets have a clear zinc coating for corrosion...

Product#: T9756

Chevrolet Small Block; Chrome Accelerator Cable Bracket; TH350

Chrome plated bracket set for Chevy small block with throttle cable type linkage. May be used with either round or square mounts. No need to remove carburetor for installation and allows for full adjustment. {specs} {fitment}

Product#: GPS6014

Lokar Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: C307911

1968-70 Camaro, Impala, Bel Air, Nova; Accelerator Pullback Spring Bracket; w/ 4 bbl. Carb

This is the retainer bracket which holds the rear loop of the throttle return spring in place. This bracket which mounts on top of the coil bracket was used on 1968-70 Camaro, Nova, Impala, Bel Air, and Caprice models with a...

Product#: KW6362

1968-69 Camaro, Chevy II Nova; 4V Quadrajet Accelerator Rod; 327, 350

Reproduction accelerator pedal rod for 327, 350 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct specifications and...

Product#: A9700101

1969-72 Camaro, Firebird; Throttle Solenoid Switch Retaining Clip; Cowl Induction, Shaker Hood

Correctly finished and accurate reproduction of the original throttle solenoid switch retaining clip for use with 1969 Camaro models. Manufactured with the correct diameter for proper installation. For.60" diameter switches...

Product#: G3794

94-98 Cruise Control Release Switch

Having trouble with your cruise control? Is it working intermittently or not at all? You may want to check the switch. This is the switch located on the brake pedal arm.

Product#: 154214

1955-1970 Accelerator Throttle Lever Arm Pinch Bolt Kit

Correct reproduction accelerator throttle lever to pedal rod pinch bolt kit, includes (1) 1/4-20 x 1-1/4" grade 5 bolt, nut & washer. GM Full Size passenger car applications: 1955-1970 Camaro applications: 1967-1969 Chevy...

Product#: D1951

Street Demon; TPS Set

When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal...

Product#: P170

1970-81 Camaro/Firebird Billet Throttle Assembly with Black Anodized Finish

Manufactured from solid aluminum, each billet throttle assembly is fully adjustable featuring a uniquely designed molded rubber insert, and spring loaded pedal. Made in USA Each assembly is anodized with machined highlights.

Product#: BAG6004

Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: BAG6001

Lokar Billet Aluminum Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and a Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: SG6016

Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: SG6007

Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: SR4017

Lokar Throttle Cable Bracket & Spring Set - Big Block 502 - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: TF801168

1994 & Later LT1/LT4 Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...