Electric Vacuum Pump Set For Power Brakes - Universal Fit
It takes 16" of Hg vacuum to properly activate your vehicle's power brake booster. Sometimes, big-cammed or supercharged engines don't create enough vacuum to operate the booster, making it more difficult to stop. This vacuum...
Front disc brake conversion kit for 1964-74 GM A, F, X-Body models. Each kit comes with stock height spindles, vented drilled and slotted 11" rotors, and black powder coated pre-loaded brake calipers. This kit is designed to...
1968-69 Camaro, Nova, Firebird; Rear Park Brake Cable; with Drum Brakes
This reproduction rear parking brake cable is designed for 1968-1969 Camaro, Nova, and Firebird models equipped with rear drum brakes. Manufactured to OE specifications, it replicates the original factory cable in length,...
1968-69 Camaro, Nova, Firebird; Rear Park Brake Cable; with Drum Brakes
Classic $39.99 ea
1967 Camaro, Firebird; Rear Disc Brake Kit; Drilled/Slotted Rotors; Black Calipers
Rear disc brake conversion kit for 1967 Camaro, Firebird. Provides disc brake stopping power at nearly the same cost as rebuilding drum brakes. Each kit comes with vented drilled and slotted 11" rotors with dual bolt pattern...
1967 Camaro, Firebird; Rear Disc Brake Kit; Drilled/Slotted Rotors; Black Calipers
Classic $389.99 ea
Universal HydroBoost Unit; Short Pedal Rod Style
Our universal HydroBoost unit features the common 3-3/8" square bolt pattern and generates up to 1800psi of line pressure to the brake calipers. This unit is powered by hydraulic line pressure from the power steering pump...
1967-68 Camaro, Chevy II Nova, 1967-69 Firebird; Park Brake Assembly; with Pedal Pad and Trim
Reproduction park brake assembly for 1967-68 Chevrolet Camaro, 1968 Chevrolet Chevy II Nova, and 1967-69 Pontiac Firebird models. This reproduction park brake assembly is manufactured to replicate the original in quality,...
1967-68 Camaro, Chevy II Nova, 1967-69 Firebird; Park Brake Assembly; with Pedal Pad and Trim
Classic $79.99 ea
1979-85 GM; Rear Caliper Set; Metric Style; With Emergency Brake; Loaded With D154 Brake Pads
Reproduction calipers based on the 1979-up factory GM-style metric calipers that accept either original GM or Lokar type emergency brake cables. Fluid inlets are tapped to accept 7/16-20 banjo fittings. Each caliper includes...
1979-85 GM; Rear Caliper Set; Metric Style; With Emergency Brake; Loaded With D154 Brake Pads
Classic $179.99 pr
Reproduction single piston Metric calipers like those that were standard equipment on 1978-88 GM mid-size vehicles. Features a 2.375" single piston, shielded bottom inlet, and 5-1/2" mounting bolt spacing. The compact size...
1967 Camaro, Firebird; Park Brake Cable & Hardware Set; for Drum Brakes
OER® reproduction of the original parking brake cables designed for use with 1967 Camaro and Firebird models without rear disc brakes. Each cable is manufactured to OE specifications replicating the originals in design...
1967 Camaro, Firebird; Park Brake Cable & Hardware Set; for Drum Brakes
Classic $139.99 set
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
1968-69 Camaro, Firebird Park Brake Cable Set; with Drum Brakes; 4 Piece Set
OER reproduction parking brake cables for 1968-1969 Camaro and Firebird models are manufactured to original GM specifications and provide a factory correct replacement for vehicles equipped with standard rear drum brakes....
1968-69 Camaro, Firebird Park Brake Cable Set; with Drum Brakes; 4 Piece Set
Classic $119.99 set
1972 Chevrolet; TCS Solenoid; Big Block ; 396, 402, 454
Reproduction of the original TCS solenoid designed for use with various 1972 Chevrolet models. This solenoid is used on all 1972 Chevrolet models with a small block engine. It mounts to the carburetor stud on the intake...
1972 Chevrolet; TCS Solenoid; Small Block
Reproduction of the original TCS solenoid designed for use with various 1972 Chevrolet models. This solenoid is used on all 1972 Chevrolet models with a small block engine. It mounts to the carburetor stud on the intake...
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM Proportioning Valve and Bracket Kit; Disc/Drum; Left Side Mount; Fits 1/2" and 9/16" Master Cylinder Ports; Brass
Classic $79.99 set
1967-74 Camaro, Firebird, Nova; Park Brake Switch Paddle Clip
Reproduction of the original park brake lamp switch paddle clip designed for use with 1967-69 Camaro, Firebird, 1968-74 Nova, and 1973-74 GM X-body models. This clip attaches to the park brake lever where the parking brake...
1965-77 GM; Disc, Disc Brake Combination Valve; with 4/Wheel Disc Brake Conversions; Various Models
If you need a new disc brake metering valve or prefer the cleaner, updated appearance of a modern brake combination valve for your 1955-57, 1967-1972 model, or require a replacement for a 1971-1977 application, this precision...
1965-77 GM; Disc, Disc Brake Combination Valve; with 4/Wheel Disc Brake Conversions; Various Models
Classic $59.99 ea
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM Proportioning Valve and Bracket Kit; Disc/Drum; Left Side Mount; Fits 1/2" and 9/16" Master Cylinder Ports; Black
Classic $74.99 set
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM Proportioning Valve and Bracket Kit; Disc/Disc; Bottom Mount; Fits 1/2" and 9/16" Master Cylinder Ports; Black
Classic $74.99 kit
Improve stopping power or replace the brake rotors on the front of various disc brake equipped 1969-74 GM vehicles with these brand new 11" diameter drilled and slotted performance rotors. Each vented rotor features 5 x 4.75"...
1970 GM; Disc Brake Metering Hold Off Valve; With Bracket
Reproduction hold-off valve for 1970 Nova models with front disc and rear drum brake systems. Includes mounting bracket. This new kit mounts next to master cylinder. Comes with bracket. This is a new version of this valve. It...
1975-81 Camaro, Firebird; Rear Park Brake Cable; with Drum Brake; LH Drivers Side
This reproduction rear parking brake cable is designed for the LH (driver side) of 1975-1981 Camaro and Firebird models. Manufactured to original GM specifications, it features the correct overall length, factory style outer...
1975-81 Camaro, Firebird; Rear Park Brake Cable; with Drum Brake; LH Drivers Side
Classic $39.99 ea
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM Proportioning Valve and Bracket Kit; Disc/Drum; Left Side Mount; Fits 1/2" and 9/16" Master Cylinder Ports; Chrome
Classic $67.99 set
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM Proportioning Valve and Bracket Kit; Disc/Disc; Bottom Mount; Fits 1/2" and 9/16" Master Cylinder Ports; Brass
Classic $68.99 kit
GM replacement style proportioning valve and mounting braket kit for various front disc brake applications. This valve kit fits disc/drum brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM Proportioning Valve and Bracket Kit; Disc/Drum; Bottom Mount; Fits 1/2" and 9/16" Master Cylinder Ports; Chrome
Classic $66.99 kit
Reproduction of the original style brake pedal pad for use with various 1973-2002 GM vehicles. Manufactured in quality EPDM rubber to factory specifications featuring the correct shape, size and horizontal pattern for a...
1973-2002 Buick, Chevrolet, GMC, Pontiac, Oldsmobile;; Brake Pedal Pad; with Auto Trans; Various Models
Classic $8.99 ea
GM replacement style proportioning valve and mounting braket kit for various four wheel disc brake applications. This valve kit fits disc/disc brake setups using a master cylinder with 1/2" and 9/16" ports. Kit includes:...
GM Proportioning Valve and Bracket Kit; Disc/Disc; Bottom Mount; Fits 1/2" and 9/16" Master Cylinder Ports; Chrome
Classic $61.99 kit
1974-78 Ford Mustang II; Caliper Bracket Set; Cast Iron; for Stock Height or 2" Drop Spindles; Pair
Our Mustang II caliper brackets are built from cast iron for superior strength. Designed to install on Stock or 2" drop spindles from a 1974-1978 Mustang II coupled with 1978 and newer GM calipers, sold separately. Will fit...
1974-78 Ford Mustang II; Caliper Bracket Set; Cast Iron; for Stock Height or 2" Drop Spindles; Pair
Classic $59.99 pr
1982-92 Camaro, Firebird; Brake Pedal Pad, with Automatic Transmission
Reproduction of the original brake pedal pad for various Camaro and Firebird models with automatic transmission. The brake pedal pad is manufactured as original including the correct honeycomb style pattern. Will fit and...
1982-92 Camaro, Firebird; Brake Pedal Pad, with Automatic Transmission
Classic $14.99 ea
1969 Camaro; 1969-1974 Nova; Rear Axle Brake Hose Bracket
Reproduction of the bracket used to hold the rear brake hose to the rear axle housing. This bracket is often broken off or discarded when changing rear axle assembly. Bracket is correct for JL-8 4 wheel disc brakes. Will fit...
Improve stopping power or replace the brake rotors on the rear of your disc brake equipped vehicle with these brand new 11" diameter performance brake rotors. Each vented rotor features dual 5 x 4.75" and 5x4.5" lug pattern...
This reproduction front disc brake backing plate set is designed for a wide range of 1970-1990 GM models and replicates the original design to ensure proper fit, function, and appearance. These plates act as critical dust...
1969-74 GM Pedal Pad Kit Manual Transmission; Without Disc Brakes Emblem - 8 Piece
Reproduction of the original pedal pads designed for 1969-74 Nova, 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes...
1969-74 GM Pedal Pad Kit Manual Transmission; Without Disc Brakes Emblem - 8 Piece
Classic $46.99 kit
This reproduction early style single bail master cylinder cover is designed for units with a 3 inch x 5-5/8 inch lid and brings a bright custom touch to your engine compartment. Manufactured from stamped steel and finished in...
These brackets are engineered for installing an aftermarket master cylinder and brake booster combo onto the firewall of 1970-1981 Camaro and Firebird models. Each bracket is precision stamped from durable steel and zinc...
1962-74 Buick, Chevrolet, Oldsmobile, Pontiac; Caliper Bracket Bolt Set
One pair of the special bolts required to secure the caliper bracket to the spindle. This bolt set fits a variety of 1967-74 GM models equipped with factory disc brakes, as a replacement for the original GM caliper bolt, OE #...
1962-74 Buick, Chevrolet, Oldsmobile, Pontiac; Caliper Bracket Bolt Set
Classic $5.99 pr
1964-81 GM; Park Brake Release Handle; Chrome; Various Models
Reproduction parking brake release handle in chrome for various 1964-81 General Motors vehicles. These chrome handles are manufactured to OE specifications that replicate the original in quality and fitment. Will install on...
This reproduction chrome dual bail master cylinder cover is designed for master cylinders featuring a 3 inch x 5-3/4 inch top. Manufactured from high quality stamped steel and finished in bright chrome plating, this cover...
1967-80 Buick, Chevy, Pontiac, Oldsmobile; Dual Master Cylinder Cover; Chrome; with Bails; 3" X 5-3/4"
Classic $11.99 ea
1970-73, 1977-81 Camaro, Firebird; Front Brake Hose Brackets; 2 Piece Set
This reproduction front brake hose bracket set is designed specifically for 1970-1973 and 1977-1981 models and is manufactured to factory specifications for an authentic fit. Each bracket features the correct hexagon shaped...
1970-73, 1977-81 Camaro, Firebird; Front Brake Hose Brackets; 2 Piece Set
Classic $31.99 set
1974-76 Camaro, Firebird; Front Brake Hose Bracket Set; Pair
This reproduction front brake hose bracket set is engineered specifically for 1974-1976 models and is manufactured to exact factory specifications. Each bracket features the correct offset keyway style opening designed...
1982-92 Camaro,1988-92 Firebird; Brake Pedal Pad, with Manual Transmission
Reproduction of the original brake pedal pad for various Camaro and Firebird models with manual transmission. The brake pedal pad is manufactured as original including the correct honeycomb style pattern. Will fit and...
1982-92 Camaro,1988-92 Firebird; Brake Pedal Pad, with Manual Transmission
Classic $14.99 ea
Proportioning Valve Bracket; Bottom Mount; Chrome Plated
Universal fit proportioning valve/combination valve mounting brackets mount your combination valves either to the frame or directly under the master cylinder, providing access to lines and fittings. Each stamped steel bracket...
1974-76 Camaro, Firebird; Front Brake Hose Bracket; RH; Passenger Side
Reproduction passenger side front brake hose bracket designed specifically for 1974-76 models. Features keyway style holes to perfectly fit the 1974-76 style brake hoses. Reproduced to exact specifications, this bracket...
1974-76 Camaro, Firebird; Front Brake Hose Bracket; RH; Passenger Side
Classic $18.99 ea
1974-76 Camaro, Firebird; Front Brake Hose Bracket; LH; Driver Side
Reproduction drivers side front brake hose bracket designed specifically for 1974-76 models. Features keyway style holes to perfectly fit the 1974-76 style brake hoses. Reproduced to exact specifications, this bracket...
1974-76 Camaro, Firebird; Front Brake Hose Bracket; LH; Driver Side
Classic $18.99 ea
1969-74 GM Pedal Pad Kit Manual Transmission; Without Disc Brakes Emblem - 4 Piece
Reproduction of the original pedal pads designed for 1969-74 Nova, 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes...
1969-74 GM Pedal Pad Kit Manual Transmission; Without Disc Brakes Emblem - 4 Piece
Classic $22.99 kit
1967-84 Master Cylinder Cover; Single Bail; Chrome Plated; without Diaphragm;
This reproduction single bail master cylinder cover measures 4-7/8 inches x 2-3/8 inches and is manufactured from stamped steel for an authentic fit and feel. Finished in bright chrome plating, it delivers a clean, custom...
1967-84 Master Cylinder Cover; Single Bail; Chrome Plated; without Diaphragm;
Classic $12.99 ea
These brackets are designed for mounting aftermarket 4-bolt master cylinder/booster combinations to the firewall of almost any vehicle that has a flat area for mounting a booster. Universal fit for most aftermarket 7", 8",...
1964-75 Brake Booster Sleeve; Various GM Models
Reproduction of the original brake booster sleeve designed for use with 1967-79 Camaro and Firebird, and 1968-75 Chevy II Nova models. This white sleeve is manufactured from blow-formed plastic and connects from the back of...
1967-77 GM Pedal Pad Kit - Auto Trans - 3 Piece Kit
This complete kit is designed to replace pedal pads on a variety of Chevrolet models including 1967-68 Camaro with drum brakes and an automatic transmission as well as a variety of additional GM models as listed. Kit includes...
1968-81 GM Pedal Pad Kit; Auto Trans; 3 Piece Kit; Various Models
Reproduction of the original pedal pads to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission. Replacing the pedal pads...
1968-81 GM Pedal Pad Kit; Auto Trans; 3 Piece Kit; Various Models
Classic $17.99 kit
Universal Residual Pressure Valve; Blue; 2 psi
Residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...
1970-91 GM; Single Bail Chrome Master Cylinder Cover; 5-5/8" X 3"; With Bail and Diaphragm
Reproduction of the early model single bail 3" x 5-5/8" master cylinder cover. Add that extra dash of chrome to your engine compartment's appearance. Manufactured in stamped steel and finished in bright chrome plating. Comes...
1970-91 GM; Single Bail Chrome Master Cylinder Cover; 5-5/8" X 3"; With Bail and Diaphragm
Classic $11.99 kit
9/16" & 1/2" lines for left side mount prop valve. Sold as a pair. Specifications: For use with 9/16" & 1/2" Ports Master Cylinders Use For Left Side Mounting Silver Zinc Plated Steel Lines
Steel Line Set for Left Side Mount Proportioning Valve; 9/16" x 1/2" Fittings; Silver Zinc Plated Steel
Classic $5.99 pr
Reproduction style proportioning valve lines for use with various models. Measures 1/2" & 3/8" lines for most Ford dual reservoir master cylinders and 3/8" & 3/8" lines for bottom mount proportioning valve. Each line features...
1967-81 Buick, Chevrolet, Pontiac, Oldsmobile; Brake Pad Trim Plate; with Auto Trans
Correct reproduction of the original chrome brake pad trim bezel designed for use with various GM 1967-81 F, Y, and X body models with automatic transmission brake pads. Manufactured in stampled aluminum featuring a bright...
1967-81 Buick, Chevrolet, Pontiac, Oldsmobile; Brake Pad Trim Plate; with Auto Trans
Classic $6.99 ea
1964-81 Buick, Chevrolet, Oldsmobile, Pontiac; Park Brake Release Handle
OER® reproduction parking brake release handle featuring the correct factory configuration, lettering, and surface grain. Unlike the later GM service replacement versions sold elsewhere, this premium reproduction is an...
1964-81 Buick, Chevrolet, Oldsmobile, Pontiac; Park Brake Release Handle
Classic $9.99 ea
1964-90 Buick, Chevrolet, Pontiac, Oldsmobile; Park Brake Pedal Pad ; Various Models; OER
Reproduction park brake pedal pad for various 1964-90 Buick, Chevrolet, Pontiac, and Oldsmobile models. Manufactured in quality EPDM rubber and replaces the original pad exactly. Features correct horizontal ribbed design with...
1964-90 Buick, Chevrolet, Pontiac, Oldsmobile; Park Brake Pedal Pad ; Various Models; OER
Classic $4.99 ea
1969-87 GM; Park Brake Pedal Pad; Various Models; OER
Correct reproduction of the original style park brake pad designed for use on various 1969-81 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each park brake pad is manufactured in quality EPDM rubber to factory dimensions....
1964-82 Buick, Chevy, Pontiac, Oldsmobile; Brake Pedal Pad; with Auto Trans; Drum Brakes
Reproduction of the original brake pedal pad for use on various 1964-82 GM models with automatic transmissions. Manufactured in quality EPDM flexible rubber that makes installation easy when appplying to the brake pedal....
1964-82 Buick, Chevy, Pontiac, Oldsmobile; Brake Pedal Pad; with Auto Trans; Drum Brakes
Classic $6.99 ea
1969-81 Camaro, Firebird, Nova; Park Brake Pedal Pad Trim Plate
Correct OER® reproduction of the original stainless steel park brake trim plate installed in various GM models from 1969-81 including 1969-81 Camaro models. Each plate is manufactured to original factory specifications...
1967-81 Camaro, Firebird, 1968-74 Nova; Brake Pedal Pad; with Auto Trans & Disc Brakes
This correct OER® reproduction of the original brake pedal pad is designed for use on various GM models including 1968-70 Camaros equipped with both an automatic trans and disc brakes. The reproduction features the...
1967-81 Camaro, Firebird, 1968-74 Nova; Brake Pedal Pad; with Auto Trans & Disc Brakes
Classic $12.99 ea