Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...
Power Steering Pump or Smog Pump Bracket Spacer; 3/4" O.D. x 3/8" wide
This spacer is used between the power steering pump and mounting bracket or the smog pump and the mounting bracket on various GM models. Use as required. 3/8" width 27/64" inside dia 3/4" outside dia
Power Steering Pump or Smog Pump Bracket Spacer; 3/4" O.D. x 3/8" wide
Classic $5.99 ea
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style
Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style
Classic $19.99 ea
1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style
Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...
1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style
Classic $21.99 ea
1977-96 Impala/Full-Size; 77-92 GM F-Body; 77-79 Nova - Steering Coupler
This reproduction steering coupling joint is required to connect the steering column box to the steering column. Coupler Specifications: Shaft type: 3/4" coarse spline w/ flat at bolt head side Spline Count: 30 Total OD:...
1967-69 GM F-Body & 1968-74 X-Body; Power Steering Return Hose Factory Inspection Stamp; G-23A
During assembly, workers identified correct hoses for placement by the stamp marks on them. This stamp was an identification and date code used on power steering return hoses approximately every three inches. Get an original...
1967-69 GM F-Body & 1968-74 X-Body; Power Steering Return Hose Factory Inspection Stamp; G-23A
Classic $23.99 ea
1965-72 GM Various Vehicles; Power Steering Bracket Stud; Front Exhaust Manifold; Left
Correct replacement stud used to mount the power steering bracket to the left side exhaust manifold. {fitment}
1965-72 GM Various Vehicles; Power Steering Bracket Stud; Front Exhaust Manifold; Left
Classic $7.99 set
1970-72 Camaro; Detroit Speed; Front Service Kit
Rebuild your front steering components with this kit of selected Moog and DSE parts for an upgraded new car feel. Stock Service Kit includes: Tie Rod Adjusters Inner and Outer Tie Rods Idler Arm Note: Power Pitman Arm Not...
March Performance Self Locking Chrome Power Steering Pulley Nut 9/16"-18 Thread
This chrome plated self-locking nut is designed for aluminum performance power steering pulleys. It can also be used with OE and aftermarket pulleys on Saginaw power steering pumps with a 9/16"-18 threaded shaft. Made in USA
March Performance Self Locking Chrome Power Steering Pulley Nut 9/16"-18 Thread
Classic $1.99 ea
1964-77 GM; Tie Rod End/Spindle Nut Set
This hardware set contains the 20 steering nuts necessary to mount the spindle to the control arms, the tie rod ends to the center link and secure the steering arms.
1960-77 Power Steering Pulley Nut & Washer Set; for GM Models
Reproduction power steering pulley washer and nut for various 1960-77 GM models. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16"- 18. {fitment}
1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft
This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...
1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft
Classic $16.99 set
5/16"-24 Grade 8 Hex Nut Zinc; Each
5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...
1964-79 GM; Pitman Arm Nut/Washer Set
Reproduction gear box steering arm large nut and lock washer set. This nut and washer mount the steering pitman arm to the manual or power steering gear box. Applications: 1967-72 Camaro 1967-72 Firebird 1964- 72 Impala /...
Correct spacer which keeps the power steering pump from making contact with the front support.
1965-75 Power Steering Hose Wire Retainer
Made of steel wire, this retainer holds the two power steering hoses together in the engine compartment and prevents hose damage. Applications: 1973-74 Apollo 6 cylinder 1967-70 Camaro 1972-75 Camaro - V8 1965-67 Impala /...
3/8" Magna-Pure Power Steering Filter
In-line Magna-Pure Filter - Serviceable Magnetic filter element with patented built in bypass for optimal performance; filters up to 190 micron particles. Protects the entire steering system from contmination. Flushing the...
GM service replacement part of the original lash adjuster. 7/16"-20 thread. Applications: 1967-74 Camaro with power steering 1977-86 Camaro with power steering 1967-74 Firebird with power steering 19 77-86 Firebird with power...
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
Classic $4.99 ea
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1962-02 GM, Chrysler Dodge, Plymouth; Saginaw Power Steering Pump Stud And Bolt Kit; with Chrome Plated Bolts
Classic $6.99 set