Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 5953168

Headlamp Adjusting Spring

OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...

Product#: 3899847

1967-68 Camaro, 1968 Chevelle, El Camino; Headlight Bezel Nut Set ; Set of 10

Reproduction of the original style barrel nuts designed for use on 1967-68 Camaro models. These unique barrel shaped plastic insert nuts press into the steel frame and provide a secure anchor for the trim screws. These...

Product#: 3919063

1968 Camaro; Rally Sport Outer Headlight Door Cover; with Chrome Trim; LH Driver Side

Correct reproduction of the original headlamp return cover (outer door) installed on all 1968 Camaro Rally Sport models. Manufactured in quality injection molded ABS replicating the original in quality and design. This return...

Product#: K522

1967 Camaro RS; Headlight Bushing and Washer Set; 14 Piece Set

If you are rebuilding a 1967 Rally Sport headlamp assembly, then you'll want to replace the upper and lower headlight bushings. These bushings will help promote a smooth and efficient operation when the headlamps are...

Product#: 3898136

1967 Camaro; Rally Sport Outer Headlamp Door Cover; RH Passenger Side

Correct reproduction of the original headlamp return cover designed for use on 1967 Camaro Rally Sport (with hidden headlamps) models. Manufactured in injection molded ABS to factory specifications. This headlamp cover will...

Product#: K1116

1968 Camaro; RS Headlamp Bell Crank Spring and Bracket Set ; 8 Piece Set

Keys onto lower end of headlamp bell crank and acts as an over center counter balance assist. This set includes two attachment brackets which install on the lower edge of the headlamp housing and allow correct closure of the...

Product#: 3903453

1967-69 Camaro; Rally Sport Headlamp Hinge Pivot Bolt; Each

Reproduction of the original bolt used to pivot the Rally Sport headlamp doors on 1967-69 Camaro models. This bolt installs through the control opening hinge and attaches the hinge to the headlamp housing on RS (hidden...

Product#: 3929949

1968 Camaro; Rally Sport; Headlight Bellcrank; LH Drivers Side

Reproduction of the original 1968 Camaro Rally Sport bellcrank. The bellcrank installs from the headlamp actuator to the main headlamp housing assembly and enables the headlamp door to open and close when activated. Includes...

Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.

Product#: A1026

1/4"-28 GM Headlight Beam Nylon Adjuster Nut

This 1/4"-28 headlight beam adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly. Fits a wide variety of GM vehicles from 1962-on. Use as required. Sold individually....

Product#: *881381

1967-68 Camaro/1962-68 Chevrolet Truck; Headlamp Adjuster Set

Reproduction headlamp adjuster set for 1967-68 Camaro and 1962-68 Chevrolet truck models. Each set has the 4 adjusting screws and nuts and the 2 springs, enough for both headlamps. Chevrolet Applications: 1967-68 Camaro...

Product#: *881399

1969 Chevrolet Camaro; Headlamp Adjuster Kit

Reproduction headlamp adjuster kit for 1969 Camaro models. Each kit has four 2" adjusting screws with nuts and two springs, enough for both headlamps. Chevrolet Applications: 1969 Camaro

Product#: *C1404

1978-81 Chevrolet Camaro; Headlight Adjuster Set; 8 Piece Set

Reproduction style hardware used to adjust the headlamps on 1978-81 Camaro models. The correct hardware will make your headlight adjustment hardware installation easier. Includes appropriate hardware for adjusting the...

Product#: 3925457

1968-69 RS Headlamp Bellcrank Bushings ; 4 piece set

Reproduction of the original headlamp bellcrank bushings designed for use on 1968-69 RS Camaros with the hidden headlamp option. The bushings for on the upper and lower bellcranks. Manufactured with injection molded tooling...

Product#: *C1402

1965-80 Chevrolet, GMC Car & Truck; Headlight Adjuster Set; 8 Piece Set; Various Models

The correct hardware will make your headlight adjustment hardware installation easier. Includes appropriate hardware for adjusting the headlamp. See applications below. Set includes adjusters for both driver and passenger...

Product#: *596686

1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"

Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 9851

1/4"-28 GM Headlamp Adjuster Nylon Nut

This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...

Product#: CX1975

1969-79 GM; Headlamp Bulb Adjusting Spring; Various Models

OER® reproduction headlamp bulb adjusting spring for 1970-73 Camaro, 1969-72 Chevy, GMC truck, 1971-72 Monte Carlo, 1971-75 Vega, and various GM models as listed. Manufactured from high quality carbon steel music wire as...

Product#: 3899863

1967-69 Camaro; Rally Sport; Headlight Hinge Bolt Set; Short; Set of 3

Reproduction of the original one-piece, shouldered stud headlight bolts designed for use on 1967-69 Rally Sport Camaros. This set includes 3 hinge bolts which are used to mount the control opening hinge to the control arm...

Product#: A5788

1/4-28 GM Headlamp Adjuster Nylon Nut

Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68 Full...

Product#: A1025

1976-1995 GM; Headlight Beam Adjuster Nut; 1/4"-28

This green 1/4"-28 nylon nut mounts directly to the headlamp housing and enables the headlamp beam to aimed correctly. Designed for GM vehicles with fiberglass headlamp panels. Fits a variety of GM vehicles from 1976-on....

Product#: 3919064

1968 Camaro; Rally Sport Outer Headlight Door Cover; with Chrome Trim; RH Passenger Side

Correct reproduction of the original headlamp return cover (outer door) installed on all 1968 Camaro Rally Sport models. Manufactured in quality injection molded ABS replicating the original in quality and design. This return...

Product#: 3898135

1967 Camaro; Rally Sport Outer Headlamp Door Cover; LH Driver Side

Correct reproduction of the original headlamp return cover designed for use on 1967 Camaro Rally Sport (with hidden headlamps) models. Manufactured in injection molded ABS to factory specifications. This headlamp cover will...

Product#: K7917

1967-68 Camaro RS; Headlamp Door Screw Set; 8 Piece

Reproduction of the correct screw set designed to install the black outer headlamp door to the rear headlamp backing plate. Manufactured in black oxide that matches the original GM screw, this phillips head reproduction is...

Product#: 4917702

1967 Camaro; Rally Sport; Headlight Output Arm; Each

OER reproduction of the original headlamp output arm, commonly known as the bellcrank on 1967 Camaro Rally Sport models. Attaches to the return cover door assembly and the headlamp motor. The stamped steel arm, when...

Product#: 3929950

1968 Camaro; Rally Sport; Headlight Bellcrank; RH Passenger Side

Reproduction of the original 1968 Camaro Rally Sport bellcrank. The bellcrank installs from the headlamp actuator to the main headlamp housing assembly and enables the headlamp door to open and close when activated. Includes...

Product#: 3903454

1967-69 Camaro; RS Headlight Hinge to Housing Bushing; Each

Reproduction of the original style bushing that's part of the 1967-69 Camaro RS hidden headlamp hardware. This special bushing is designed to hold the headlight hinge to the headlight housing. 2 required per housing. 4...

Product#: A9400115

1940-81 GM; F-Body / Impala / Nova / Truck - Headlamp Retaining Ring Screw Set (6 Pieces)

Headlamp retaining ring screws are used to hold the headlamp bulb to the mounting bucket.

Product#: C452

1969 Camaro RS; Headlight Adapter Brackets; Pair

A great solution to any RS headlight conversion. These stamped curved plates will insert on any standard Camaro fender skirt and allow the headlights to sit further behind the grill area and allows the installation of the...

Product#: KW399

1968 Camaro; Rally Sport Headlight Door Stop Bracket; with Stoppers; Pair

Reproduction of the original headlamp bracket and rubber stoppers designed for use with 1968 Rally Sport models. Each door stop bracket is manufactured in die-stamped steel with correct size and thickness reproduction rubber...

Product#: KW158A

1969 Camaro, 1969-71 Corvette; Headlight Washer Nozzle Mounting Hardware Set; Chrome

Reproduction of the original style hardware designed for use on 1969 Camaro, Nova, and Chevelle models original equipped with the optional headlamp washer nozzles. If you're installing or replacing a set of headlight washer...

Product#: A11253

Headlamp Beam Adjuster Spring

Correct adjusting spring designed for various 1971-81 GM models. Manufactured in spring steel and supplied in the correct phosphate and oil {fitment}

Product#: CM6748

1969 Camaro Rally Sport; Inner Headlamp Door; RH Passenger Side; Made in the USA!

Reproduction of the inner portion of the headlamp door for 1969 Camaro Rally Sport models. This is the inner structure that the chrome die-cast trim and outer headlamp door attaches to. These doors are manufactured using the...

Product#: C599

1969 Camaro Rally Sport; Headlight Bellcrank; LH Drivers Side

Reproduction of the original bellcrank assembly designed for use with 1969 Camaro Rally Sport models. Bell crank is manufactured in quality stamped steel to factory specifications replicating the original in design,...

Product#: C597

1969 Camaro Rally Sport; Shaft and Lever Support; Pair

Reproduction of the original shaft and lever support for use with 1969 Camaro RS models. These levers are used to support shaft and lever assembly on all 1969 Camaro Rally Sport (hidden headlamp) models. This bracket will be...

Product#: A2303

J Nut #10 Screw Size;.027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size,.027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.

Product#: G4419K

1979-81 Camaro; Headlight Bezel Mounting Hardare Set; Z-28 and RS Models; OE Style; Torx; Black; 8 Pieces

Reproduction headlight bezel screw set for 1978-81 Camaro Z-28 and RS models. This high quality screw set features the correct size M4.2 X 20 TORX 8MM oval head fasteners with the correct black oxide finish on stainless. Rest...

Product#: G4283K

1967-68 Camaro: Headlamp Bezel Hardware Set; Rally Sport; OE Style; 16 Pieces

Reproduction headlamp bezel mounting hardware set for 1967-68 Camaro Rally Sport models. This fastener set features the correct screws, clips and nylon spacer nuts. Rest assured you have the correct hardware on hand when it's...

Product#: G4418K

1979-81 Camaro; Headlight Bezel Mounting Hardare Set; except Z-28 and RS Models; OE Style; Torx; Chrome; 8 Pieces

Reproduction headlight bezel screw set for 1978-81 Camaro models, (except Z-28 and RS). This high quality screw set features the correct size M4.2 X 20 TORX 8MM oval head fasteners with the correct chrome finish on stainless....

Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.

Product#: C622

1969 Camaro; Rally Sport Headlight Vacuum Reservoir Tank

Reproduction of the original vacuum reservoir tank originally installed on all 1969 Camaro models with Rally Sport vacuum headlights (retractable headlamps). Each canister is manufactured to exact specifications and functions...

Product#: KW398

1967 Camaro; Rally Sport Limit Switch Bracket Set; with Rubber Bumpers

Reproduction of the original limit switch brackets designed for use with 1967 Camaro Rally Sport models with hidden headlamps. Each bracket is manufactured in quality stamped steel replicating the original design and includes...

Product#: C620

1968 Camaro; Rally Sport Headlight Vacuum Reservoir Tank

Reproduction of the original vacuum reservoir tank originally installed on all 1968 Camaro models with Rally Sport vacuum headlights (retractable headlamps). Each canister is manufactured to exact specifications and functions...

Product#: C59

1969 Camaro; Rally Sport Headlamp Washer Hose Set

Reproduction of the original style headlight washer hoses and hardware required for 1969 Camaro Rally Sport models. This complete set includes all the necessary hoses to replace cracked, deteriorating or missing originals....

Product#: GF401092

2010-13 Camaro - Daytime Running Lights (DRL) Mounting Brackets (Pair)

Want to use your factory OEM Daytime Running Lights (DRL) with your new T2 bumper ports? If so, then we offer the DRL mounting brackets that will allow you to re-install your OEM DRL lights into your T2 bumper ports (p/n...

Product#: KW398A

1967 Camaro; Rally Sport Limit Switch Bolt Set; 32 Piece Set

Reproduction of the original limit switch bolts designed for use with 1967 Camaro Rally Sport models with hidden headlamps. Factory correct chrome plated bolts, nuts, flat, and star washers required to replace or add the...

Product#: KW809

1969 Camaro; RS Headlight Door Stop Brackets; with Stoppers

Reproduction of the original RS headlight door stop brackets and rubber stoppers for use with 1969 Camaro Rally Sport models with hidden headlamps. Each bracket is manufactured in stamped steel replicating the original in...

Product#: G1832

1977-97 GM; Headlamp Beam Adjusting Screw and Nut; Various Models

Original GM adjusting screw and nut designed for use with various 1982-97 GM models as listed. Each screw is manufactured by General Motors for an authentic appearance and fitment. Sold individually. Use as required....

Product#: CM6749

1969 Camaro Rally Sport; Inner Headlamp Door; LH Drivers Side; Made in the USA!

Reproduction of the inner portion of the headlamp door for 1969 Camaro Rally Sport models. This is the inner structure that the chrome die-cast trim and outer headlamp door attaches to. These doors are manufactured using the...

Product#: C598

1969 Camaro Rally Sport; Headlight Bellcrank; RH Passenger Side

Reproduction of the original bellcrank assembly designed for use with 1969 Camaro Rally Sport models. Bell crank is manufactured in quality stamped steel to factory specifications replicating the original in design,...

Product#: G4263K

1967-68 Camaro: Headlamp Bezel Hardware Set; Except RS; OE Style; 12 Pieces

Reproduction headlamp bezel mounting hardware set for 1967-68 Camaro (except Rally Sport models). This fastener set features the correct screws and nylon spacer nuts. Rest assured you have the correct hardware on hand when...

Product#: 5638498

1968-69 Camaro; Raly Sport Headlight Vacuum Relay Valve Assembly

Quality reproduction of the original GM headlight relay switch assembly designed for use on 1968-69 Chevrolet Camaro models with Rally Sport (hidden headlight) option. The relay works with the headlight switch on RS models to...

Product#: K448

1968-69 Camaro; Rally Sport Headlamp Pin & Clevis Set

Reproduction of the original pin and clevis set designed for use with 1968-69 Camaro RS models with hidden headlamps. The pin and clevis is required to hold the headlight vacuum actuator to the bracket. This is a high quality...

Product#: 3957029

1969 Camaro, Chevelle, Nova; Headlamp Washer Nozzle Set; 4 Piece Set

Exact reproduction of the original type headlamp washer nozzles designed for use on various 1969 GM models. These special windshield washer spray nozzles were standard equipment for all 1969 Rally Sport Camaros, and optional...

Product#: 3925461

1968 Camaro; Rally Sport Headlight Actuator Bracket; Large, Rear; LH Driver Side

Reproduction of the original headlight actuator support bracket designed for use with 1968 Camaro models with the Rally Sport (hidden headlight) option. This bracket supports the rear portion of the headlamp actuator canister...

Product#: K8093

1967 Camaro; Rally Sport Headlight Nut & Washer Set; 8 Piece Set

OER® reproduction of the original washers and shouldered nuts designed for use with 1967 Camaro Rally Sport models. This nut and washer set is required for the attachment of the output arm to the headlamp motor assembly....

Product#: *333798

1974-77 Chevrolet Camaro; Headlamp Bezel Installation Hardware; Standard & RS

Reproduction of the original mounting hardware used to install the headlamp bezels for 1974-77 Camaro models. This hardware set is used to mount the headlamp bezel to the headlamp housing. Includes hardware for both RH and LH...

Product#: 4919653

1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid

Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...