Product#: 153947

1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair

New stock style upper control arms for 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes a pair with cross shafts, bushings, and ball joints installed. These are made from heavy gauge steel and black...

Product#: RL7

Leaf Spring U-Bolts; 3-1/4" Wide X 6-3/4" Long; Fits 3-1/4" Axle Tubes

Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...

Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...

Product#: 153948

1955-57 Chevy Bel Air, 150. 210; Lower Control Arms; Rubber Bushings; Pair

New stock style lower control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each lower...

Product#: *K45303

1969-70 Chevrolet Impala Front End Rebuild Kit

1969-70 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...

Product#: 153951

1958-64 Impala; Lower Control Arms; Rubber Bushings; Pair

New stock style lower control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...

Product#: 153638

1958-64 Impala, Bel Air, Biscayne; Front Disc Brake Spindles; 2" Drop; Pair

These 2" drop spindle are for use when you want to lower your disc brake converted car a full 2". The spindles are precision cast from high quality Ductile Iron, with 4140 Chrom-moly CNC machined pins and accepts factory...

Product#: *TF500023P

1955-57 Chevy Bel Air, 150, 210; Front End Rebuild Set; Rubber; with Power Steering

Reproduction of the original components required to rebuild the front end for 1955-57 Chevrolet Bel Air, 150, 210 models with power steering. Each componet is manufactured to original factory specifications in the OE rubber...

Product#: 153628

1958-64 Impala, Bel Air, Biscayne; Front Tubular Lower Control Arms; Pair

These performance tubular lower control arms are designed to accept the standard coil spring, coil-over shocks or shocks with air bags. The arms are powder coated black and pre-assembled with our Del-a-lum bushings, billet...

Product#: TF500042

1955-57 Chevrolet Bel Air, 150, 210; 2" Drop Spindles; RH and LH; Pair

These one piece spindles allow you to lower vehicle ride height 2" without affecting steering geometry or suspension travel, which also eliminates the need for bolt-on caliper brackets or steering arms. Cast from the highest...

Product#: 153635

1955-57 Chevy Bel Air, 150, 210; Lower Tubular Control Arms; Pair

Tubular control arms are designed for maximum strength and visual impact. These control arms are designed for a stock replacement offering a great look. All arms capture both sides of the bushing, unlike the originals that...

Product#: 10268

1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 153632

1965-70 Impala, Caprice, Bel Air; Upper Tubular Control Arms; Pair

These tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on...

Product#: 153627

1958-64 Impala, Bel Air, Biscayne; Front Tubular Upper Control Arms; Pair

Reproduction of the original upper tubular upper control arms designed for use with 1958-64 Impala, Bel Air, Biscayne, and Full Size Chevrolet models. These tubular style upper control arms change the way the car drives and...

Product#: TR103107

1955-57 Chevrolet 150/210/Bel Air; Front Suspension Rebuild Set; Manual Steering

Despite it's durability (when new), the front suspension of your classic Chevrolet is still prone to wear out with age. Restore handling and reduce front tire wear with this rebuild set. This set will renew your worn out...

Product#: 12163

1955-64 Chevy Bel Air, 150, 210, Biscayne, Impala; Lower Control Arm Bushing Set; 4 Piece Set; With Cup Washers and Hardware

Reproduction lower control arm bushings for 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your suspension by replacing the old...

Product#: 12297

1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each

Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...

Product#: *K45301

1958-62 Chevrolet Impala Front End Rebuild Kit

1958-62 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...

Product#: *K45302

1965-68 Chevrolet Impala Front End Rebuild Kit

1965-68 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...

Product#: *K45304

1971-72 Chevrolet Impala Front End Rebuild Kit

1971-72 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...

Product#: *K45305

1973; Chevrolet Impala; Front End Rebuild Kit

1971-72 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...

Product#: *K45306

1974-76; Chevrolet Impala; Front End Rebuild Kit

1974-76 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...

Product#: FSB909

1958-64 Impala, Bel Air, Biscayne; Front Sway Bar" 1" Diameter

Front sway bar kit for 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. This sway bar kir is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and...

Product#: FSB900

1955-57 Bel Air, 150, 210, Nomad; Front Sway Bar; 1" Diameter

These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. These offer all of the above without affecting your ride quality. Kit...

Product#: RSB501

1958-64 Impala, Bel Air, Biscayne; Rear Sway Bar Kit; 1" Diameter

These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. These offer all of the above without affecting your ride quality. Kit...

Product#: RSB503

1955-57 Chevrolet Bel Air, 210, 150, Del Ray; Rear Sway Bar Set; 7/8" Diameter; Except Nomad or Wagon Models

Rear sway bar for 1955-57 Chevrolet Bel Air, One-Fifty series, Two Ten series (except Nomad or wagon models). This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...

Product#: CX2035

1959-64 Impala, Bel Air, Biscayne; 1959-62 Corvette; Rear Strut Rod Bushing; for Panhard Bar or Rear Strut Rod; Each

Reproduction bushing for the rear panhard rod on 1959-64 Chevrolet Impala, Bel Air, Biscayne models, and for the rear strut rod on 1959-62 Corvette. If your full size Chevrolet or Corvette model is feeling loose around...

Product#: 14796

1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set

Reproduction of the original style upper control arm shafts for use with 1958-64 Impala, Bel Air, and Biscayne models. Set include shafts, bushings, washers and washer/bushing retainer bolts. {fitment}

Product#: 154632

Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...

Product#: 14794

1955-57 Chevy Bel Air, 150, 210; Upper Control Arm Shaft Set; with Rubber Bushings

This reproduction upper control arm shaft set is for use on 1955-57 full size models. These upper shafts have an extra 2 degrees of caster built into them. The added caster is a must for cars equipped with power steering....

Product#: TF500055

1956-57 Chevy Bel Air, 150, 210; Leaf Spring Shackle Set; LH Driver Side

Reproduction rear leaf spring shackle for 1956-57 Chevrolet Bel Air, 150, 210 models. This shackle set is manufactured to correct factory specifications offering an authentic replacement to the old or worn out original...

Product#: A1004

1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shaft; LH or RH

Quality reproduction of the lower control arm cross-shaft for use on various 1958-64 Chevrolet Impala, Bel Air, Biscayne, and 1963-82 Corvette models. Each control arm shaft is manufactured in quality stamped steel to...

Product#: C5819

1958-64 Impala, Bel Air, Biscayne, El Camino; Lower Control Arm Plate Set; with Screws and Washers

Reproduction of the original lower control arm plate for use with 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Each set includes a forged lower control arm plate with Grade-8 screws and washers. 2 sets required per...

Product#: 18203

1967-05 Buick, Chevrolet, Oldsmobile, Pontiac; Front Sway Bar End Link; 2" Spacer; LH or RH; 2 Required

Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle. Has 2" Spacer {fitment}

Product#: 18060

1967-2005 GM; Sway Bar End Link; Original Style; with Hardware; Rubber; 2-1/2" Spacer; LH or RH Side; 2 Required

Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...

Product#: W1006

1964-2000 GM; Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH; Various Models; Each

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...

Product#: *TF500326

1955-57 Chevrolet Passenger Car Tubular Control Arm Set Upper and Lower

These tubular control arms are designed for maximum strength and enhance the handling performance of 1955-57 Chevrolet passenger car models. These arms are not only stronger and lighter weight than the factory arm, they also...

Product#: 153634

1955-57 Chevy Bel Air, 150, 210; Upper Tubular Control Arms; Pair

Enhance the handling performance of your 1955-57 Chevrolet Bel air, 150, 210, or Nomad model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved...

Product#: 153950

1958-64 Impala, Bel Air, Biscayne; Upper Control Arms; Rubber Bushings; Pair

New stock style upper control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH upper control arms with cross shafts, bushings, and ball joints...

Product#: *TF500023

1955-57 Chevrolet Bel Air, 210, 150; Complete Front End Rebuild Set; Rubber; w/o Power Steering

Reproduction of the original components required to rebuild the front end for 1955-57 Chevrolet Bel Air, 150, 210 models without power steering. Each component is manufactured to original factory specifications in the OE...

Product#: 153633

1965-70 Impala, Caprice, Bel Air; Lower Tubular Control Arms; Pair

These tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on...

Product#: *TF500022

1955-57; Chevrolet Bel Air, 150, 210; Front End Rebuild Set; Basic; Manual Steering

Reproduction of the original components required to rebuild the front end for 1955-57 Chevrolet Bel Air, 150, 210 models. Each componet is manufactured to original factory specifications in the OE rubber material replicating...

Product#: 10203

1955-70 Full Size Chevy; Upper Ball Joint; with Hardware; RH or LH

Reproduction of the original upper ball joint designed for use with 1955-70 Chevy full size models including 1955-57 Chevy, and 1958-70 Impala, Bel Air, Biscayne, and Caprice models. Control arm ball joints take a beating...

Product#: 10231

1958-82 Chevrolet; Lower Ball Joint with Hardware; Various Applications

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 10277

1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 153637

1955-57 Chevrolet Bel Air, 150, 210; Econo Line Disc Brake Drop Spindles; 2" Drop

This 2" drop spindle set for 1955-57 Chevrolet Bel Air, One-Fifty or Two-Ten models is compatible with most aftermarket single-piston disc brake kits. Spindles use stock steering arms and will improve steering and handling,...

Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...

Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...

Product#: 12310

1971-96 GM; Upper Control Arm Bushing; Various Models; Pair

Reproduction style upper control arm bushing designed for various 1971-96 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: FSB912

1955-57 Bel Air, 150, 210, Nomad; Front Sway Bar; 7/8" Diameter

Front sway bar for 1955-57 Chevrolet Bel Air, One-Fifty series, Two Ten series, and Nomad models. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle...

Product#: 14797

1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shafts; Set

Reproduction of the original style lower control arm shafts for use with 1958-64 Impala, Bel Air, Biscayne and full size Chevrolet models. Set include shafts, bushings, washers and washer/bushing retainer bolts. Sold in...

Product#: 10068783

1970-96 GM Lower Control Arm Bumper, Each, Various Models

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...

Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember

Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...

Product#: TF500039

1955-57 Bel Air, 150, 210; Lower Control Arm Rubber Bumper; Each; OER

Reproduction of the original front lower control arm bumper designed for use on all 1955-57 Chevrolet car models. This control arm bumber is manufactured in hard rubber with the correct threaded mounting stud as original....

Product#: 14795

1955-57 Chevy Bel Air, 150, 210; Lower Control Arm Shaft Set; with Rubber Bushings

Reproduction of the original lower control arm shaft for use on 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. These lower shafts include rubber bushings, washers and washer/bushing retainer bolts. {fitment}

Product#: TF500054

1955 Chevy Bel Air, 150, 210; Rear Leaf Spring Shackle Set; RH or LH

Reproduction rear leaf spring shackle for 1955 Chevrolet Bel Air, 150, 210 models. This shackle set is manufactured to correct factory specifications offering an authentic replacement to the old or worn out original...

Product#: TF500035

1955-57 Chevy Bel Air, 150, 210; Lower Control Arm Ball Joint

Reproduction of the original lower control arm ball joint designed for use with 1955-57 Chevrolet Bel Air, one-Fifty Series, Two-Ten Series, and Nomad models. Control arm ball joints take a beating over the years and often...

Product#: 406887

1973-91 Buick, Chevy, GMC, Olds, Pontiac; Sway Bar Bracket; Each; Various Models

OER® reproduction of the original style "U" shaped sway bar bushing clamp designed for use with various GM models. This bracket is manufactured from stamped steel and used to hold the inner sway bar bushings and the sway...

Product#: TF500056

1956-57 Chevrolet Bel Air; Leaf Spring Shackle Set; RH Passenger Side

Reproduction rear leaf spring shackle set for 1956-57 Chevrolet Bel Air and Full size models. Your leaf spring shackles are usually in poor shape when removed, don't reinstall worn out parts. For use on the RH passenger side....

Product#: A1007

1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft; Pair; LH and RH

Quality reproduction of the lower control arm cross-shafts for use on various 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Upper control arm shafts are manufactured in quality stamped steel to original factory...