Product#: 10243

1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Product#: 10630

1970-75 GM; Windshield Molding Clip; Each

Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...

Product#: TF300001

1956 Chevy Bel Air, 150, 210, Nomad; Center Hood Bar Molding

Reproduction hood bar molding for 1956 Chevrolet Bel Air, 150, 210, Nomad, and Sedan Delivery models. Features bright chrome plating and the correct factory style mounting points. Mounting hardware included. Features and...

Product#: TF300002

1957 Chevy Bel Air, 150, 210, Nomad; Front Hood Bar Molding

Reproduction of the original hood bar molding designed for use with 1957 Chevrolet Bel Air, 150, 210, Del Ray, and Nomad models. Features correct chrome plating and factory style mounting points. Mounting hardware included....

Product#: K143

1962-64 Impala, SS, Bel Air; Back Glass Molding Clip Set

OER® reproduction of the original back window reveal molding clips set designed to fit 1962-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: 3799051

1962 Impala, Biscayne, Bel Air; Hood Lip Molding; with "CHEVROLET" lettering; GM Licensed

Reproduction hood lip molding for 1962 Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high-grade aluminum and replicates the original design. Features the word "Chevrolet" with black outlined...

Product#: C78

1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24

Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...

Product#: 986561

1966 Impala, Caprice; Hood Spear Molding; with Hardware

OER® reproduction of the original hood spear molding designed for use on 1966 Impala and Caprice models. Each molding is reproduced to exact specifications and manufactured in a polished zinc die-cast material for an...

Product#: K115

1964 Impala, Bel Air, Biscayne; Outer Grill Eyebrow Moldings; RH & LH; Pair

Reproduction of the original front fender lower eyebrow (outer grill) moldings designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is a replication of the original GM eyebrow molding found on...

Product#: 986188

1965 Impala, Bel Air, Biscayne; Hood Spear Molding

OER® reproduction of the original hood spear molding designed for use on 1965 Impala and Ful Size Chevrolet models. Each molding is produced to match the original in quality, fit and appearance. Each molding is precision...

Product#: K142

1963-64 Impala, Bel Air; Windshield Molding Clip Set; 2 Door Hardtop

OER® reproduction of the original windshield reveal molding clips set designed to fit 1963-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: C78A

1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set

Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...

Product#: K123

1962-64 Impala, 1962 Bel Air; Rear Back Glass Molding Set; 2 Door, Hardtop; 5 Piece Set; OER

OER® reproduction of the original back glass molding set designed for use on 1962 Bel Air 2 door hardtop, 1962-64 Impala, and Impala SS, 2-door hardtop models. Each set of back glass moldings is designed to replace the...

Product#: C2367

1966 Impala, Bel Air, Caprice; Wheel Openining Molding Kit; Front & Rear; with Hardware; Set of 4

Reproduction of the original wheel opening moldings designed for use on 1966 Impala Bel Air, and Caprice models. Each molding is stamped to original factory specifications with correct contours and finish for an original...

Product#: 748695

1955 Chevy Bel Air, 150, 210; Rear Quarter Upper Paint Divider Moldings; 2 & 4 Door Sedan; Stainless Steel

Reproduction upper paint divider moldings for 1955 Chevrolet Bel Air, One-Fifty & Two-Ten Series 2 or 4 door sedan models. This molding mounts at the paint divide between the quarter panel molding and the rear quarter window...

Product#: 6263054

1972-75 GM Full Size; Wheel Well Molding; RH Front

Reproduction of the original wheel opening molding designed for use with 1972-75 Chevrolet full size models. Each molding is manufactured to factory specifications replicating the original GM molding exactly. OER reproduction...

Product#: 4506041

1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each

Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...

Product#: TF400089

1955 Chevrolet Bel Air; Quarter Panel Molding; 2 Door; Stainless Steel; RH, Passenger Side

Reproduction quarter panel molding for 1955 Chevrolet Bel Air, 2 door models. Each molding is manufactured in quality stainless steel replicating the original in design, appearance, and fitment. Fits RH passenger side. Refer...

Product#: M1738

1962 Bel Air, 1962-64 Impala; Roof Drip Rail Moldings; 2 Door Hardtop; RH & LH; Pair

Reproduction roof drip moldings for 1962-64 Chevrolet Bel Air, and 1962-64 Impala 2 door hardtop models. Each molding is manufactured in stamped aluminum to OE specifications and will replace the old, damaged, or missing...

Product#: 9895598

1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Product#: MN2103

Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set

Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...

Product#: *TF901057

1957 Chevrolet Bel Air, 210, Nomad; Lower Windshield Molding Set; With Wiper Cut-Outs; 3 Pieces

Reproduction windshield moldings for 1957 Chevrolet Bel Air, 210, and Nomad models. Each molding is manufactured to correct dimensions offering an authentic appearance and fitment. Finish is highly polished to bring back the...

Product#: TF400037

1955-57 Chevy Bel Air, 150, 210, Nomad; Lower Windshield Molding Clip Set

Reproduction of the original clips and hardware designed to install the lower moldings on 1955-57 Chevy Bel Air, 150, 210, and Nomad models. When replacing trim pieces on your 1955-57 Chevrolet it's a good idea to replace...

Product#: C2371

1964 Impala, Bel Air, Caprice; Rear Cove Quarter Panel Extension Molding; LH Driver Side

Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...

Product#: C2370

1964 Impala, Bel Air, Biscayne; Rear Cove Quarter Panel Extension Molding; Standard; RH Passenger Side

Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...

Product#: 748558

1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; RH Passenger Side

Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...

Product#: 748618

1962 Impala; Tail Panel Cove Moldings; with Hardware; Pair

Correct reproduction of the original tail lamp cove moldings for 1962 Impala and Full size Chevrolet models. These polished aluminum moldings attach to the quarter panel and act as an extension of the trunk lid molding....

Product#: 748559

1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; LH Driver Side

Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...

Product#: 3827132

1963 Impala, Bel Air, Biscayne; Upper Eyebrow Molding; RH Passenger Side

Reproduction of the original front upper eyebrow extension molding designed for use on 1963 Impala and Full Size Chevrolet models. Manufactured in quality stamped aluminum replicating the original molding in fit and...

Product#: TF400044

1955 Chevy Bel Air; Front Fender Molding; Stainless Steel; RH, Passenger Side

Reproduction of the front fender molding for use with 1955 Chevrolet Bel Air models. Each molding is manufactured in quality stainless-steel replicating the original factory design. Features correct contours, finish and...

Product#: 748624

1962 Impala, Bel Air; Upper Trunk Lid Molding; with Clips

Reproduction of the upper trunk lid molding designed for use on 1962 Impala and Bel Air Chevrolet models. Trunk lid molding fits on the rear upper section of the trunk lid. Each molding is contoured and stamped in quality...

Product#: TF401225

1955-57 Chevy Bel Air, 150, 210; Upper Windshield Molding; Sedan, Station Wagon; RH Passenger Side; Stainless Steel

Reproduction of the original upper windshield molding designed for use on various 1955-57 models. This stainless steel molding is manufactured to original factory specifications and features original style contours and...

Product#: TF400098

1957 Chevrolet Bel Air, 210 2-Door; Lower Quarter Molding; Long; Stainless Steel; RH, Passenger Side

Reproduction lower stainless steel long quarter panel molding for 1957 two door Bel Air and 210 models. Each molding is manufactured in quality polished stainless steel to correct factory specifications offering an authentic...

Product#: TF400097

1957 Chevrolet Bel Air, 210 2-Door; Lower Quarter Molding; Long; Stainless Steel; LH, Driver Side

Reproduction lower stainless steel long quarter panel molding for 1957 two door Bel Air and 210 models. Each molding is manufactured in quality polished stainless steel to correct factory specifications offering an authentic...

Product#: TF401231

1955-57 Chev Bel Air, 150, 210, Nomad; Lower Corner Windshield Molding; Stainless Steel; RH Passenger Side; Except Convertible

Reproduction lower corner windshield molding for various 1955-57 Chevrolet Tri-Five models. Each stainless steel molding is manufactured to factory specifications featuring original style contours and correct end shapes to...

Product#: TF400067

1955 Chevy Bel Air; Fender Extension & Door Molding; 2 Door; Stainless Steel; LH Driver Side

Reproduction fender extension and door molding for 1955 Chevrolet Bel Air models. Each molding is manufactured in quality stainless steel replicating the original in every detail. This molding mounts to the front of the door...

Product#: 270070

1970-75 Camaro, Firebird, Impala, Caprice; Molding Clip Set; Windshield or Rear Window; 24-Pieces

Correctly configured windshield or rear window molding clips designed to install 1970-1974 windshield or back glass window molding sets on a variety of popular GM models. This 24-piece set of reproduction window molding clips...

Product#: TF400052

1957 Chevrolet 210, Bel Air 2-Door, 4 Door; Front Fender Molding; Stainless Steel; LH, Driver Side

This reproduction stainless steel fender molding for 1957 Chevrolet Bel Air and Two-Ten models features correct contours, finish, and mount using original style hardware. The clips that hold the molding on are part number...

Product#: TF400079

1957 Chevrolet Bel Air, 210 2-Door; Door Molding, Stainless Steel; RH, Passenger Side

This reproduction stainless steel door molding for 1957 Chevrolet Bel Air and Two-Ten 2-door models features correct contours, finish, and mount using original style hardware. The clips that hold the molding on are part...

Product#: TF400078

1957 Chevrolet Bel Air, 210 2-Door; Door Molding, Stainless Steel; LH, Driver Side

This reproduction stainless steel door molding for 1957 Chevrolet Bel Air and Two-Ten 2-door models features correct contours, finish, and mount using original style hardware. The clips that hold the molding on are part...

Product#: 8736590

1965-1975 Buick, Chevrolet, Pontiac, Oldsmobile; Front Windshield, Rear Window Glass Molding Clip Set; with Sealing Screws; 10 Clip Set

Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...

Product#: B1422

1964 Impala; Bel Air; Trunk Split Molding Clip Set

The correct hardware can make a great difference in the finished look or your restoration. When mounting or replacing the trunk center split molding on your 1964 Impala or Bel Air model, use the correct clips for a proper...

Product#: 7698976

1967-72 GM; Molding Clip; Windshield or Back Window; Upper; Lower; Each

Reproduction of the D-Shaped front windshield or back window molding clip for various 1967-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE...

Product#: 153733

1968-on GM; Molding Clip; Windshield, Quarter Window, Rear Window; Skylight; 14 Piece Set

Replacement style rear window glass molding installation clips for 1968-72 Chevy II and Nova models as well as a wide variety of additional GM models. Each clip is designed and manufactured to replicate the OE style clips...

Product#: TF400100

1957 Chevy Bel Air, 210; Upper Short Curve Quarter Molding; Polished Stainless Steel; 2 Door; RH Passenger Side

Reproduction upper short curve quarter panel molding for 1957 Bel Air and 210 2 door models. Each molding is manufactured in quality stainless steel to correct factory specifications offering an authentic appearance and...

Product#: TF400099

1957 Chevy Bel Air, 210; Upper Short Curve Quarter Molding; Polished Stainless Steel; 2 Door; LH, Driver Side

Reproduction upper short curve quarter panel molding for 1957 Bel Air and 210 2 door models. Each molding is manufactured in quality polished stainless steel to correct factory specifications offering an authentic appearance...

Product#: 748841

1960-67 Chevrolet; 1963-66 Buick; 1961-66 Oldsmobile; Quarter Panel, Trunk Molding Capped Retaining Nut

Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...

Product#: 270210

1972-85 GM; Molding Clip Set; For Windshield or Rear Window Molding; Steel; Set of 24

Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each clip set will provide a snug fit for the molding being attached. The amount of clips required for the job will...

Product#: 4648746

1955-57 Bel Air, 150, 210, Nomad; Quarter Panel Paint Divider Molding Clip; Each

OE style reproduction molding clip used to attach the vertical paint divider moldings on all 1955-56 models and 1957 150 models. On 1956 Bel Air sedan and wagon models where the paint divider molding extends into the body...

Product#: TF401177

1955-57 Chevy Bel Air, 150, 210, Nomad; Door Belt Molding Screw Set; Hardtop; Convertible

Reproduction door belt molding screw set for 1955-57 hardtop, convertible, and Nomad models. These screws feature the correct length and shape for a proper fit.

Product#: *R13956

1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set

This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...

Product#: 154010

1967-72 GM; Molding Clip; Windshield or Back Window; Upper, Lower; 24 Piece Set

Reproduction of the D-Shaped front windshield molding clip for various 1967-on GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Replaces OE #'s 7698976, 8736591. Sold as a...

Product#: A5196

Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...

Product#: 378362S

1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack

Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...

Product#: 355785S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 353577S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 9639

1965-72 GM; Windshield, Back Window Molding Clip; Each

Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...

Product#: 3886638

1962-1976 GM; Rocker Panel Molding Retainer; Each

This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water buildup between the rail and rocker...

Product#: 3842091

1964 Chevrolet Bel Air, Biscayne, Impala; Front Hood Lip Molding; with Emblem & Hardware

Reproduction front hood lip molding & emblem for 1964 Chevrolet Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high grade aluminum duplicating the original GM molding in every detail for an...

Product#: TF400927

1957 Chevy Bel Air, 150, 210; Vertical Tail Fin Molding Set; 4 Piece Set

Reproduction quarter vertical fin moldings for 1957 Chevrolet Bel Air, 150, and 210 models. Feature stainless finish, correct contours, and mount just like the originals. Sold in 4-piece sets. Features and Benefits:...